Ecowitt Wireless Rain Gauge WH5360 Presentation

Hello, here's some operation presentation for this WH5360 Rain Gauge.
Please follow the tips to sync the indoor receiver(display console) and outdoor sensor(rain collector):
1. Put the inside receiver on one side and the remote sensor on the other side).
2. Remove all the batteries of the inside receiver and remote sensor.
3. Insert batteries on the inside receiver.
4. Insert batteries on the remote sensor.
7. The inside receiver will display the temperature and humidity within a few minutes.
To set the time, date and more, please try this:
Press and hold the SET button, till the first setting "24h" flashes.
Press(not hold) the RAIN 1 or RAIN 2 button to choose 24h/12h.
Press(not hold) the SET button to enter the hour, minute, weekday, year, month, date setting mode.
Use the RAIN 1 and RAIN 2 button to increase or decrease the numbers.
In normal mode:
Short press the Rain 1 button to view the rain rate, event, 1h,24h
Short press the Rain 2 button to view the rain day, week, month, year, total
Short press the History button to view the railfall records with time stamp
Short press the Hi/Lo button to view the max/min records for the indoor temperature and humidity
Alarm mode:
Press and hold the Hi/Lo button to enter the alarm mode and set alert for the following:
Time
Rain rate
Rain event
High/low alert for temperatue and humidity
Use the RAIN 1 and RAIN 2 button to turn on/off the alarm and increase or decrease the numbers.
After your setting, you can install the remote sensor(rain collector) on your desired place.
Any question, please contact us at [e-mail]
To know more and purchase this product: bit.ly/2D74F06

[@jmdds]

I believe the flat outer edge funnel should have a more angle slope so it will read the entire full rain event before evaporating in full sun.

[@kwonderful992]

Can I set an alarm when rain is detected.

[@ecowittweather]

Of course, you can even set exact values.

[@WX4GPS]

Does it use a reed switch?

[@indranujlahiry395]

can i set the timer to in minutes (for an experiment) please reply ASAP

[@ecowittweather]

Hi, you can set the minutes of time on the console.

[@chileroads7031]

Hello, I just installed the instruments HP 3501 and I can see the rain mm is divided by 10. How can I calibrate it?

[@ecowittweather]

Hello, sorry for the delay.
May I know has your problem resolved? What do you mean of the "the rain mm is divided by 10" ?
Please contact us at [e-mail]. Thank you.

[@xxxfirebossxxx1957]

Does it messure rain intensity like how much mm or inch per hour, rainfall rate

[@ecowittweather]

Hello, it will measure rain rate(Rainfall rate, record a rainfall in 1 minute, record a total of 10min, the total rainfall in 10min multiplied by 6 is the rainfall rate.).