How to Replace Bumper Cover 2011-2019 Ford Explorer
HTML-код
- Опубликовано: 22 сен 2022
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/59/an/bumpers-and-parts
This video shows you how to install a bumper cover on your 2011-2019 Ford Explorer. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Socket 1aau.to/oa/1AXAA00017
• 19mm Socket 1aau.to/oa/1AXAA00043
• 5.5mm socket
• 8mm Socket 1aau.to/oa/1AXAA00017
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Extensions 1aau.to/oa/1AXAA00015
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Change the video description that this is valid before 2015, because after 2016 facelift it has stupid inner side bolts that hold the bumper from the inside, 3 pieces per side.
Is this the first step in replacing the outer front headlight bulbs? Fantastic video!
I didn’t have to remove the wheel but got to have a tool short enough to remove the 5.5 bolts
If your car is a PIU, don't bother with the inner fender well: you have no driving lights, so no need for access to unplug them.
Thank you. Very useful video
Perhaps the worst design I’ve ever seen on any car in my life, driving since 1981. Have to remove the bumper cover to get to the headlight assembly.
... as done by a pro. Thanks, very informative.
Close to $400 to replace ONE bulb at my local Ford dealer. I have been doing it myself for 55 years and joking about removing engines to get to oil filters, etc. LOL
He must’ve been there when they built this car.
Can you do this without removing the wheels? I assume its just for ease of use to get to the wheel well screws?
Thanks so much!