Brilliant! My daughter's 2012 Corolla is all beat up and we certainly didn't want to pay to have all the clips and fittings replaced. Both sides were hanging off between the headlight and wheel well. I used Permatex Black Plastic Welder. 5min set, 10min cured. The black line between the two panels looks great and intensive wiggling shows everything to be stuck up in there really well! Thanks!
@@southernberean8166 I don't see where I mentioned anything about a "few more years". As far as I'm concerned, my daughter can drive it until she's a grandma. It's just so beat up cosmetically this solution was a much better option than spending a bunch of money on a proper repair. Peace.
I have the same problem with my 2015 Nissan Rogue; a few broken clips but its not too bad. This video should help with that problem. I will give it a shot today.
Took me less than 10 min to get this done on my 2010 Honda Civic certainly easier and cheaper than having to replace the whole bumper entirely, appreciate the video!
after watching this video, i fixed my Honda Civic 2012 bumper and it isn't going ANYWHERE now. i got the bigger tubes of epoxy for $20 from autozone and did both sides, along with a headlight that needed changing and i spent the afternoon doing the repairs. Thank you YouCarAngel! Way better than spending god know how much the autobody shop would have charged me to fix this.
TIP: Firstly thanks so much for the clear instructions. I just finished my repair. Try carefully peeling the masking tape away when the glue is 2/3rds dry. I did this on the second side and had perfect results. First side i has the same tearing as in the video and has to use a razor blade to finish the tape removal. Rather than duct tape, i just help the bumper in place with my hands (actually a leaned my whole body into it and used my hands). The bumper was not a nicely refitted as in the video so duct tape would never have worked.
Yeah man, I'm so glad I read your comment before trying this. I sat on a crate and positioned my knee so I could add pressure to hold it in place. After about 5 mins I started to peel the tape off whilst still holding it with one hand and with my knee. Getting the tape off before it hardens made a massive difference, there was sill a little bit that I had to cut out but I reckon your comment alone saved me about 30 mins. TIP: If you're reading this, wear a glove and push the glue in with your finger, it goes in cleaner and further.
Do you really not have the sense to figure out what 2/3rds of something is? In this case he was clearly referring to the drying time which you will see on the instructions.
This is caused by bumper scrapping and catching on those parking spot curbs. The curbs are too high for today’s cars. I always park a foot short of them now.
The parking curbs are not the problem, the low orientation of the bumpers on the cars is the issue. This is just another example of how car manufacturers exercise planned obselence of their vehicles.
@@retiredhappy466 ya partially agree cz it’s a preferable choice to drive and do what you like in life? No? So life around us needs to adjust to us not us to it. Besides what’s it costs to make the parking curbs a little shorter (nothing crazy maybe 3-5 cm) no the problem is the parking curbs my man......think bout it So now I gotta ride in style the way the parking curbs want u to.? Lol but not all that confusing just stay a foot away from the curb
Idiots think they need to put their tires up to the curb or sidewalk instead of realizing their cars are about two and half feet in front of the tires. Figure out where the front of your car is, park there. Or, pull up until your tires run into something and tell you to stop, it's just plastic.
This, coupled with another video - loosening, snugging broken tab in, and tightening the screw on the tab bracket- helped my son save $1400 on a loose bumper of a10 year old Lexus. Thanks so much!
You're a lifesaver I have a 2016 Corolla with over 17,000 mi and I'm not about to buy a new bumper. I have tried crazy glue and it worked for about a month but it wasn't as strong I'm going to try this in the morning... CAN'T WAIT!!!💥❤️
I did this repair exactly as you suggested except I used 100% silicone, indoor/outdoor,,its been 3 weeks seems to be holding perfect, looks fantastic, was super easy,,👍👍
@@phclout5893 I'm glad to report still holding/looking perfect. if and when it let's go I'll just clean off the clear silicone I used and reapply useing same method
That's an interesting idea,thanks. It has some flex for resilience and peels right off if needed later. I'm guessing the biggest factor is having enough contact area
@@ronchappel4812 thankfully its still holding /looking great and I wash my camaro every week no problem,,,I like the silicone better because it's easy to remove if I ever need to and easy to reapply.
jb opoxy won't hold up under the sun's UV radiation. ived done this before on my prius and after 1 year, the opoxy will become brittle and crack. you need outdoor UV resistant construction glue
I have several times sorted this problem out by removing the headlight and using cable ties through the return on both the bumper cover and the wing. Much easier and a lot less messy.
I found an easier way! If you remove some of the clips holding the plastic liner of the wheel well, so you can get access to the 'inside' of the quarter panel, you can reach in, pull off what's left of the old broken bumper clips, and insert a ZIP TIE there instead. You then thread the length of zip tie to the hole on the bumper and bring it around to the other part of the zip tie where the hole is. You then pull up the excess length of the zip tie, pulling up the bumper, and that's it, fixed.
That's exactly what I was planning to do with my old honda civic which is extremely low for Houston roads but some of my loops on the bumper broke so I'll probably have to use this "glue mix "🙄 I don't like the idea as everything must be removable in my opinion but what can I do...
I bought the materials when I made my above comment. It took me a minute, but in the meantime, someone smacked the other side and broke that clip. I followed your instructions and both sides of the bumper came out beautiful. I was able to find a clear self mixing epoxy with a detachable long nozzle. It was basically injecting the epoxy. The paint tape and duct tape worked great. I used alcohol on a cotton ball to remove the small amount of duct tape residue. It’s been bugging me all this time. Don’t know why I waited so long. Probably 20 minutes total to fix both sides. Good as new.
Thank a million for this. I ran over a dead kangaroo, which flicked up dislodging the bumper from the body. The repair place said it required a replacement bumper, only about $1000. I was really annoyed to think it could not be repaired. Anyway got a friend to help me do this gluing & it is fixed. I am so happy!
Been trying to figure out how to reattach my front bumper on one side for the last 2 yrs. This is brilliant!! Going to do this tomorrow. Thank you SOOOOO much!!!
My headlights are intact and look fine, and the bulbs for my car are easy to access via opening the hood. I used a non residue duck tape from Home Depot. Was able to leave that on the car for longer than 10 min, and it was very easy to come off. Thanks for the video!
Greg, Thank you so much! The bumper clips on my Huyndai Sonata were broken and I did exactly what you spelled out in the video. $10 and 30 minutes later, I have fixed my bumper and it looks almost new.....at least a whole lot better than it was before. Thank you again. Ron.
Thank you. I unknowingly parked over a rock that was somehow embedded in the ground and when I reversed it pulled my bumper a little. Enough to brake the clips on one side 🤦🏻♀️ but it’s no more than the car you showed today. So thank you so much for saving me money!
Thanks ! I have used JB Weld before on bumpers, but I didn’t use the painter’s tape. Adding the painter’s tape will make a huge difference. I have a rental car business that rents to gig workers, and wow they can mess up some cars lol. Doing this is much more cost effective than replacing the bumper even if I were to do the bumper replacement myself with aftermarket parts.
I've had problems with the mess that duct tape can leave behind. I now use gaffer tape where duct tape is called for. Strong, no mess (especially when the tape is left on for long periods), and comes off easy too. Only draw back is about 4X more expensive. I like Gaffer Power brand; Amazon has it in multiple colors and different widths.
We got a used car and didn't notice the front passenger side bumper was broken. Thank you so much for this easy step by step video instructions. Just did it and hopefully it will stay together 🤞
Thanks for this, much appreciated. Just fixed up my bumper on a 2009 Suburu that some incompetent didn't seem to be able to avoid in a car park. Looks almost perfect and probably a $1000 repair in a body shop.
This is a great idea. Thank you so much. I’m going to give it a try. I have a 2004 Toyota matrix that is 21 years old and someone ran into me and I’ve had bumper hang for a while and needsome paint correction. I decided to do it all myself. ❤🎉
As a young girl in college who knows nothing about cars and don’t talk to my dad anymore I’m so glad I found this video! Just bought some of that on Amazon and I’m excited to do this myself! I’m tired of driving around with my bumper all janky. So thank you. Right now I just have zip ties holding it together
@@aranciata1723 the message is still the same you don’t have to be around him but you do have to forgive him and anyone who has done you wrong or else our father won’t forgive us
My channel specializes in making cars last 25 years... yep that's right. So this car may only have 3 more years left in it, or may have 13 more years in it... just gotta take care of it and see how far you can go. Thanks Greg!
I dont agree that car with over 170 thousand miles has 3 more years left remaining. I owned a 95, 96 Civic and 2005 Accord and they are all still running with almost 200,000 miles.
The Switz, I own and drive a 2002 Jeep Wrangler, 1995 Ford F-150 and 1992 Mazda Miata. They each have 165-185k miles and still run strong! There is the trade off of more maintenance and repairs, but it’s still cheaper than buying one 50-$60,000 New truck.
@@billytrevathan6405 You got that right! And if you do your own maintenance with cheap parts it won't cost you that much. And the great thing about a 20 year old car with 200,000 miles on it is that you are not likely to "ruin" it if you make a mistake.
The Switz I just had a clutch put in the Miata for $500 total, parts and labor. Well, I know a good mechanic that is semi-retired and is great for jobs I don’t want to do myself. My wife was telling me about a friend that had to pay just to get on a waiting list for the new vehicle of their choice, then pay more than msrp when it came in! It’s crazy what people are paying for new vehicles. Most modern vehicles are just getting started at 100,000 miles, as long as they are maintained properly and have not been driven in the city on short commutes for many years.
Your so cool! I’m an Uber driver and people constantly tell me I’m ruining my car. By driving people around is all I’m good at so I’m kind of stuck driving this car way over most peoples annual mileage.
You can also remove the plastic piece with the broken clips and repair that with jb weld or even better replace it with a piece from the junk yard. Also a Toyota with 175k easily has another 100k miles on it if it has been well maintained.
Yea man 170k is nothing.. my moms Toyota is over 200k with little maintenance, still going strong. And I have a 2002 Mazda P5 at 180k still drive her like she's brand new . These early year Japanese cars can make it to 300k+ EASILY . These aren't domestic cars 🤣
PERFECT Timing!! Thanks for posting! Its like this at the back of my car. Now Im glad I get to fix it easily. Finally got all the parts as well. Thank you thank you thank you
Thank you for this walk-through that explains it perfectly! My bumper got nailed a couple of years ago in my work parking lot (hit and run, no note) and I can't afford the repair that insurance won't cover. In our hot and humid climate in Texas, tape alone won't hold. I'll be trying this and hoping for peace of mind while driving ☺
OMG... Found this video last week, spent the $6.34 for the cold weld and its fantastic! My 2016 Corolla bumper cover kept popping out and not anymore! 😊
Thanks a thousand times for this great tip, I had the same issue on my 14 years old Toyota Avensis and I succeded to fix it following your instructions, I found the J&B Weld on Amazon for 16 EUR.
Wah, this guys the real thing, hes thorough and stresslless, i can do anything this guy teaches, i like his attitude, relaxed, good job, thanks!!! Like, like, like
I so appreciate your video you saved me lot of money for my sons beat up bumper and fender. Thank you so much your awersome! I haven't done it yet but i already no its gonna work fine.
You're brilliant! A genius and truly my car angel!! I just got a car for cheap and the front AND back bumper is like this despite the seller saying it wasn't in an accident. It's been driving me insane though and wasn't about to be taking apart my damn bumper! This however, I can do!!
Thankyou so much for the tips I'm going to try this soon bc my bumper is coming loose like this on one side and making a terrible clicking noise when I drive!
I had the same idea. But I didn’t use painters tape. That is a good idea. Thanks for saying to use painters tape. I used duct tape, but mine was lacking in adhesive, so it did not stick well at all. Use a duct tape that has a lot of adhesive. I am going to do it again. Thanks for the great video.
Thank you so much. Fiat 500 has a flex seam between the bottom side of the bumper and the upper bumper that easily breaks if you bottom out on a curb. I was able to fix the break point. Thank you!
Thanks for this video. I now am confident about the way I should go about "glueing" my bumper back together. The part about masking off the parts of the bumper was just what I needed, and hadn't considered before. I'll look for YourCarAngel the next time I have a car problem. Thanks again.
After watching your video I fixed both sides of my bumper with this fix. I didn't have any gloves and did it anyway. I got some JB Weld on my hand and just for the heck of it I used some WD40 and it came right off. Don't do what I did get gloves!!
thank you i need to try this. luckily i have bumper clips behind the bumper where the plastic welds broke. im just going to bond the clip to the back of the bumper with cold weld.
@@rcharding Not true. You can: Drill two holes in hidden places and zip tie it, and then just cut and reziptie for use. Get bumper quick release (Can be hidden, too) If there's too much material lacking you can "weld" plastic on plastic by melting it together. Then use any method you prefer, including the original one. Chances are you can't clip it back on because somewhere the plastic has broken off. This hacky job in the video that looks worse than ziptie is one of the worst you can do imo.
Say man, you explain things so well ! Permatex can get at Auto Zone ! Or JB or JV quick?? adhesive glue like ?! Or simply at an auto body supply?!?? Other material easy to get!
My bumper got caught on my dad’s trailer hitch. Probably a curb or two since I lived in the city a few years ago. The auto body places will only replace the entire bumper, which would be crazy expensive and probably not be the same color as my car. Just for the clips! Thanks for the adhesive recommendation, the other one I tried cracked off already. Not too concerned about it looking perfect but the painters tape trick is a great idea as well.
i did this a week ago. seemed to work. now it's coming apart. i'm giving him thw benefit of the doubt tho. inlive in Palm Springs CA where it's been 110 degrees everyday. maybe its the heat
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Brilliant! My daughter's 2012 Corolla is all beat up and we certainly didn't want to pay to have all the clips and fittings replaced. Both sides were hanging off between the headlight and wheel well. I used Permatex Black Plastic Welder. 5min set, 10min cured. The black line between the two panels looks great and intensive wiggling shows everything to be stuck up in there really well! Thanks!
Under 200,000 miles and just got a few more years left? It must not be a Toyota then
@@southernberean8166 I don't see where I mentioned anything about a "few more years". As far as I'm concerned, my daughter can drive it until she's a grandma. It's just so beat up cosmetically this solution was a much better option than spending a bunch of money on a proper repair. Peace.
I have the same problem with my 2015 Nissan Rogue; a few broken clips but its not too bad. This video should help with that problem. I will give it a shot today.
@@Bkaleb328pop
@@1518joefil1 He was talking about the guy on the video, not you.
Took me less than 10 min to get this done on my 2010 Honda Civic certainly easier and cheaper than having to replace the whole bumper entirely, appreciate the video!
Where did you buy this stuff and what it called so I can buy it.
@@Fitnessbabe123they sell this shit at tractor supply and Walmart probably most other stores too
after watching this video, i fixed my Honda Civic 2012 bumper and it isn't going ANYWHERE now. i got the bigger tubes of epoxy for $20 from autozone and did both sides, along with a headlight that needed changing and i spent the afternoon doing the repairs. Thank you YouCarAngel! Way better than spending god know how much the autobody shop would have charged me to fix this.
Tried this on my wife's 2010 Civic. Passenger side no problem. Driver's side the bumper wouldn't align. It was about a quarter inch short.
TIP: Firstly thanks so much for the clear instructions. I just finished my repair. Try carefully peeling the masking tape away when the glue is 2/3rds dry. I did this on the second side and had perfect results. First side i has the same tearing as in the video and has to use a razor blade to finish the tape removal. Rather than duct tape, i just help the bumper in place with my hands (actually a leaned my whole body into it and used my hands). The bumper was not a nicely refitted as in the video so duct tape would never have worked.
how long is 2/3 dry?
Yeha how long is 2/3 dey
Yeah man, I'm so glad I read your comment before trying this. I sat on a crate and positioned my knee so I could add pressure to hold it in place. After about 5 mins I started to peel the tape off whilst still holding it with one hand and with my knee. Getting the tape off before it hardens made a massive difference, there was sill a little bit that I had to cut out but I reckon your comment alone saved me about 30 mins.
TIP: If you're reading this, wear a glove and push the glue in with your finger, it goes in cleaner and further.
Do you really not have the sense to figure out what 2/3rds of something is? In this case he was clearly referring to the drying time which you will see on the instructions.
@@neben 66%
Very important to CLEAN the gap prior to repairing because any polish will stop adhesion.
This is caused by bumper scrapping and catching on those parking spot curbs. The curbs are too high for today’s cars. I always park a foot short of them now.
The parking curbs are not the problem, the low orientation of the bumpers on the cars is the issue. This is just another example of how car manufacturers exercise planned obselence of their vehicles.
@@retiredhappy466 I like low cars
@@retiredhappy466 ya partially agree cz it’s a preferable choice to drive and do what you like in life? No? So life around us needs to adjust to us not us to it. Besides what’s it costs to make the parking curbs a little shorter (nothing crazy maybe 3-5 cm) no the problem is the parking curbs my man......think bout it So now I gotta ride in style the way the parking curbs want u to.? Lol but not all that confusing just stay a foot away from the curb
100%
Idiots think they need to put their tires up to the curb or sidewalk instead of realizing their cars are about two and half feet in front of the tires. Figure out where the front of your car is, park there. Or, pull up until your tires run into something and tell you to stop, it's just plastic.
THANK YOU! They quoted me $200 for a repair and $500 for a replacement bumper. I am very happy with the results and my wallet thanks you!!!
This, coupled with another video - loosening, snugging broken tab in, and tightening the screw on the tab bracket- helped my son save $1400 on a loose bumper of a10 year old Lexus. Thanks so much!
You're a lifesaver I have a 2016 Corolla with over 17,000 mi and I'm not about to buy a new bumper. I have tried crazy glue and it worked for about a month but it wasn't as strong I'm going to try this in the morning... CAN'T WAIT!!!💥❤️
Tried this today with my bumper it worked and came out great! Instead of a plastic knofr try using an old gift card it worked better with no mess 🙌🏽
I did this repair exactly as you suggested except I used 100% silicone, indoor/outdoor,,its been 3 weeks seems to be holding perfect, looks fantastic, was super easy,,👍👍
How did it hold up
@@phclout5893 I'm glad to report still holding/looking perfect. if and when it let's go I'll just clean off the clear silicone I used and reapply useing same method
That's an interesting idea,thanks.
It has some flex for resilience and peels right off if needed later. I'm guessing the biggest factor is having enough contact area
@@ronchappel4812 thankfully its still holding /looking great and I wash my camaro every week no problem,,,I like the silicone better because it's easy to remove if I ever need to and easy to reapply.
jb opoxy won't hold up under the sun's UV radiation. ived done this before on my prius and after 1 year, the opoxy will become brittle and crack. you need outdoor UV resistant construction glue
I have several times sorted this problem out by removing the headlight and using cable ties through the return on both the bumper cover and the wing. Much easier and a lot less messy.
This sound promising. I figure there has to be a way to tight it up. My main job is DoorDash so I just need to to hold in place while I deliver.
I found an easier way! If you remove some of the clips holding the plastic liner of the wheel well, so you can get access to the 'inside' of the quarter panel, you can reach in, pull off what's left of the old broken bumper clips, and insert a ZIP TIE there instead. You then thread the length of zip tie to the hole on the bumper and bring it around to the other part of the zip tie where the hole is. You then pull up the excess length of the zip tie, pulling up the bumper, and that's it, fixed.
I’m going to try this on my 2006 Honda Ridgeline!
That does not sound easier
The clips that broke don’t they sell them separate ?
That's exactly what I was planning to do with my old honda civic which is extremely low for Houston roads but some of my loops on the bumper broke so I'll probably have to use this "glue mix "🙄 I don't like the idea as everything must be removable in my opinion but what can I do...
Excellent idea with the zip ties.
Thank you. I have a 2006 Explorer, very clean but I didn’t want to spend a fortune reattaching. Great instructions. Thanks.
I bought the materials when I made my above comment. It took me a minute, but in the meantime, someone smacked the other side and broke that clip. I followed your instructions and both sides of the bumper came out beautiful. I was able to find a clear self mixing epoxy with a detachable long nozzle. It was basically injecting the epoxy. The paint tape and duct tape worked great. I used alcohol on a cotton ball to remove the small amount of duct tape residue. It’s been bugging me all this time. Don’t know why I waited so long. Probably 20 minutes total to fix both sides. Good as new.
Thank a million for this. I ran over a dead kangaroo, which flicked up dislodging the bumper from the body. The repair place said it required a replacement bumper, only about $1000. I was really annoyed to think it could not be repaired.
Anyway got a friend to help me do this gluing & it is fixed. I am so happy!
Been trying to figure out how to reattach my front bumper on one side for the last 2 yrs. This is brilliant!! Going to do this tomorrow. Thank you SOOOOO much!!!
@@space1space still holding strong!
My headlights are intact and look fine, and the bulbs for my car are easy to access via opening the hood. I used a non residue duck tape from Home Depot. Was able to leave that on the car for longer than 10 min, and it was very easy to come off. Thanks for the video!
Greg, Thank you so much! The bumper clips on my Huyndai Sonata were broken and I did exactly what you spelled out in the video. $10 and 30 minutes later, I have fixed my bumper and it looks almost new.....at least a whole lot better than it was before. Thank you again. Ron.
Hey, mine just popped off too. How is the repair holding up?
Thank you. I unknowingly parked over a rock that was somehow embedded in the ground and when I reversed it pulled my bumper a little. Enough to brake the clips on one side 🤦🏻♀️ but it’s no more than the car you showed today. So thank you so much for saving me money!
The same thing happened to me 🤣
@@mrmvp2323 wtf and to me lol!!!
We did that today! In Flowood and we live an hour away.
Thank you for showing me how to put my front bumper back in place!!! Have a blessed night because you deserve it!!! 🙏🏾🙏🏾🙏🏾
Thanks ! I have used JB Weld before on bumpers, but I didn’t use the painter’s tape. Adding the painter’s tape will make a huge difference. I have a rental car business that rents to gig workers, and wow they can mess up some cars lol. Doing this is much more cost effective than replacing the bumper even if I were to do the bumper replacement myself with aftermarket parts.
you just helped a 19 year old out with this, it happened so unexpectedly I had no clue what to do! so thank you!!
Lmao same, 19 years old and I gotta do this :/
@@RetroMaster64 twinsies 🤞🏽😄
@@a1leeen 🤣FR
I've had problems with the mess that duct tape can leave behind. I now use gaffer tape where duct tape is called for. Strong, no mess (especially when the tape is left on for long periods), and comes off easy too. Only draw back is about 4X more expensive. I like Gaffer Power brand; Amazon has it in multiple colors and different widths.
Thanks for the tip!
Wow this really worked well I used the exact tools he’s using and I don’t think my bumper will be coming off any time soon 😄
Thankyou! This video is exactly what I needed. I am also passed 170,000 mile mark and the body shop repair was way too expensive for me to justify.
Thanks. I’m selling my car and had a minor accident-rolled over the parking margin-and my bumper slightly unclipped. Perfect advice.
We got a used car and didn't notice the front passenger side bumper was broken. Thank you so much for this easy step by step video instructions. Just did it and hopefully it will stay together 🤞
Thanks, for this video!
I recently went to a body shop, and the fella told me that it would cost some $1300.
Hancock says;
"Pass".
Immagine 1300. For a 55.00 new bumper on line. These buisnesses will rip you off.
Exactly what I needed. You sir are a blessing! Everyone be sure to smile to day, it'll get better.....yes even for you.
Thanks for this, much appreciated. Just fixed up my bumper on a 2009 Suburu that some incompetent didn't seem to be able to avoid in a car park. Looks almost perfect and probably a $1000 repair in a body shop.
This is a really clever fix! I also like the comment which suggested using clear indoor/outdoor caulk, as that’s removable if necessary.
man, you're the BEST 'free' teacher out there.
This is a great idea. Thank you so much. I’m going to give it a try. I have a 2004 Toyota matrix that is 21 years old and someone ran into me and I’ve had bumper hang for a while and needsome paint correction. I decided to do it all myself. ❤🎉
As a young girl in college who knows nothing about cars and don’t talk to my dad anymore I’m so glad I found this video! Just bought some of that on Amazon and I’m excited to do this myself! I’m tired of driving around with my bumper all janky. So thank you. Right now I just have zip ties holding it together
Rad
How did it work out for you
Honor thy mother and father and you will live out all your days if not you will perish early whatever he did it’s not worth the grudge. God Bless 🛐
@@lilwan827 what if he's a serial rapist?
@@aranciata1723 the message is still the same you don’t have to be around him but you do have to forgive him and anyone who has done you wrong or else our father won’t forgive us
My channel specializes in making cars last 25 years... yep that's right. So this car may only have 3 more years left in it, or may have 13 more years in it... just gotta take care of it and see how far you can go. Thanks Greg!
I dont agree that car with over 170 thousand miles has 3 more years left remaining. I owned a 95, 96 Civic and 2005 Accord and they are all still running with almost 200,000 miles.
The Switz, I own and drive a 2002 Jeep Wrangler, 1995 Ford F-150 and 1992 Mazda Miata. They each have 165-185k miles and still run strong! There is the trade off of more maintenance and repairs, but it’s still cheaper than buying one 50-$60,000
New truck.
@@billytrevathan6405 You got that right! And if you do your own maintenance with cheap parts it won't cost you that much. And the great thing about a 20 year old car with 200,000 miles on it is that you are not likely to "ruin" it if you make a mistake.
The Switz I just had a clutch put in the Miata for $500 total, parts and labor. Well, I know a good mechanic that is semi-retired and is great for jobs I don’t want to do myself.
My wife was telling me about a friend that had to pay just to get on a waiting list for the new vehicle of their choice, then pay more than msrp when it came in! It’s crazy what people are paying for new vehicles. Most modern vehicles are just getting started at 100,000 miles, as long as they are maintained properly and have not been driven in the city on short commutes for many years.
Your so cool! I’m an Uber driver and people constantly tell me I’m ruining my car. By driving people around is all I’m good at so I’m kind of stuck driving this car way over most peoples annual mileage.
You can also remove the plastic piece with the broken clips and repair that with jb weld or even better replace it with a piece from the junk yard. Also a Toyota with 175k easily has another 100k miles on it if it has been well maintained.
Bigger pain removing the bumper to fix the clips, though. This is much quicker!
Yea man 170k is nothing.. my moms Toyota is over 200k with little maintenance, still going strong. And I have a 2002 Mazda P5 at 180k still drive her like she's brand new . These early year Japanese cars can make it to 300k+ EASILY . These aren't domestic cars 🤣
❄️ 🤣 speaking fax
@@TesNRad Over here we have several b230 volvos with 500k+ on them. Cars can last forever if you want them to.
@@tracklizard4018 nice man! Older volvos are quality cars aswell
So glad I saw this vid. Gonna try replacing the main clip mounts if that does not work. Your way is my last resort. Awesome life hack!
PERFECT Timing!! Thanks for posting! Its like this at the back of my car. Now Im glad I get to fix it easily. Finally got all the parts as well. Thank you thank you thank you
Thank you for this walk-through that explains it perfectly! My bumper got nailed a couple of years ago in my work parking lot (hit and run, no note) and I can't afford the repair that insurance won't cover. In our hot and humid climate in Texas, tape alone won't hold. I'll be trying this and hoping for peace of mind while driving ☺
I've done a strong concealed job with cable ties before on a bumper
Thanks for telling us a story we don’t care about 😅
@@Mak2Grim Look everybody, I found the douchebag!
@@Mak2Grim Thanks for proving to us that you’re a weirdo that could have just kept scrolling instead of commenting 💀
OMG... Found this video last week, spent the $6.34 for the cold weld and its fantastic! My 2016 Corolla bumper cover kept popping out and not anymore! 😊
Thank you for the tip! it's an awesome idea. I nearly need to spend over a grand to buy the parts and another a grand to replace the parts.
Same🤦🏾♀️
OMG THANK you for this video!! You are saving me $80 a body shop quoted me for doing this. I will attempt it myself
Thanks a thousand times for this great tip, I had the same issue on my 14 years old Toyota Avensis and I succeded to fix it following your instructions, I found the J&B Weld on Amazon for 16 EUR.
Wah, this guys the real thing, hes thorough and stresslless, i can do anything this guy teaches, i like his attitude, relaxed, good job, thanks!!! Like, like, like
I so appreciate your video you saved me lot of money for my sons beat up bumper and fender. Thank you so much your awersome! I haven't done it yet but i already no its gonna work fine.
You're brilliant! A genius and truly my car angel!! I just got a car for cheap and the front AND back bumper is like this despite the seller saying it wasn't in an accident. It's been driving me insane though and wasn't about to be taking apart my damn bumper! This however, I can do!!
Thanks my 2008 MKZ with 240,00 miles is running and looking great thanks to this information. 5 stars my friend!
Thankyou so much for the tips I'm going to try this soon bc my bumper is coming loose like this on one side and making a terrible clicking noise when I drive!
I tried this - worked very well. Take your time though as this can be very messy.
I followed your video and was able to fix the annoy bumper cover gap due to a broken clip. Thank you so much!
I will definitely give this a try on my 2012 Ford Escape.Thanks Angel
I have this exact problem on my rear bumper,,I'm gonna follow all steps except I'm gonna try useing clear outdoor silicone,,hopefully it works,,
Holy shit dude, thank you so much. Just got into an accident, want to make sure I can keep this car looking nice for a long time to come.
Same just gotta get my bumper side intact again. Don’t want to worry about not passing inspection
Thank u soooo much this worked for only $13 for all the supplies!!! God bless! ✅👏🏾🙏🏾
Appreciate the video. Came in very handy. Saved me about $1500
I had the same idea. But I didn’t use painters tape. That is a good idea. Thanks for saying to use painters tape. I used duct tape, but mine was lacking in adhesive, so it did not stick well at all. Use a duct tape that has a lot of adhesive. I am going to do it again. Thanks for the great video.
Greg, thank you! ive got the same issue on a 2013 corolla , on that SAME exact spot! This will do nicely
Same here 2010 Corolla
Same 2013 Corolla lol
Exactly what I needed to repair the bumper on my car before putting it up for sale! Off to Walmart for some JB Kwikweld!
Thank you so much. Fiat 500 has a flex seam between the bottom side of the bumper and the upper bumper that easily breaks if you bottom out on a curb. I was able to fix the break point. Thank you!
Try Gaffers tape if you're concerned about tape residue.
big thanks!
im not really a big fan of those quick release accessories you can buy online.
so i think this one solve my bumper problem
I also took the effort on my 2014 sorento with the same issue and it worked alittle rough but it looks good. 👌 thanks man
Thank you for this video. I did this to my rav4 and it did a great job.
Thanks for this video. I now am confident about the way I should go about "glueing" my bumper back together. The part about masking off the parts of the bumper was just what I needed, and hadn't considered before. I'll look for YourCarAngel the next time I have a car problem. Thanks again.
Thank you! I used this technique on my car and it worked great!
Very helpful video,I will try this procedure when weather is warmer in Canada😂
Somebody hit my rear bumper and the clips were gone. This is a good video!!
THANKS SO MUCH, Angel! A lot more simple of a process for non-naturally mechanical car guys!
Thank you man I will do this to my car.. it's happening in the same spot as your video... was a good learn
All very well, but, what if you need to disconnect the bumper again, to change headlamp for example.
That's why he said he would only recommend this on cars that are almost out. For newer cars, take them to the body shop
After watching your video I fixed both sides of my bumper with this fix. I didn't have any gloves and did it anyway. I got some JB Weld on my hand and just for the heck of it I used some WD40 and it came right off.
Don't do what I did get gloves!!
Thanks, great video with not distracting background music. Off to the box store to buy quick setting J.B, Kwik
I have a 2006 Honda Ridgeline that i bought used, that needs this repair. Thank you for the video, great tip!!😃
Did you fix your Ridgeline? I also have a 2006 Ridgeline that needs fixing.
@@axjohn no i never got the chance to try this. My bumper is still in rough shap. Good luck,i think this wiil work.😃
@@robbeewisher8972 so did it work how is your bumper been going?
Its still holding up,and looking pretty good 👍
@@robbeewisher8972 thanks will try now
thank you i need to try this. luckily i have bumper clips behind the bumper where the plastic welds broke. im just going to bond the clip to the back of the bumper with cold weld.
Umm what if i wanna take the bumper off to do a repair after this?
It's your choice. The only alternative is a new bumper, which will run you over $1,000 with parts and labor.
@@rcharding Not true. You can:
Drill two holes in hidden places and zip tie it, and then just cut and reziptie for use.
Get bumper quick release (Can be hidden, too)
If there's too much material lacking you can "weld" plastic on plastic by melting it together. Then use any method you prefer, including the original one. Chances are you can't clip it back on because somewhere the plastic has broken off.
This hacky job in the video that looks worse than ziptie is one of the worst you can do imo.
Easy, you dont.
Just sell and buy another car
Greg this was a great video and I tried this today and it worked brilliantly. Im a big fan.
Great tip my man, you just nailed what I was looking for. God bless
Glues and tapes work every time baby! :) Thanks for the video.
Say man, you explain things so well ! Permatex can get at Auto Zone ! Or JB or JV quick?? adhesive glue like ?! Or simply at an auto body supply?!?? Other material easy to get!
Hi I got same problem and when I was searching this is really useful video 4 me good job bro
Thanks Greg this was the only helpful video out of 100 your great dude 💯
Thank you a lot Sir, I fixed my car and saved 2k
Thanks Greg. I appreciate all your videos.
This is exactly what I am looking for, thank you very much MR BRILLIANT? Very well done!.
Great video! Question: how much would it cost to repair something minor just like the one you fixed but at a mechanic? Roughly? Thank you! 🙏
My bumper got caught on my dad’s trailer hitch. Probably a curb or two since I lived in the city a few years ago. The auto body places will only replace the entire bumper, which would be crazy expensive and probably not be the same color as my car. Just for the clips! Thanks for the adhesive recommendation, the other one I tried cracked off already. Not too concerned about it looking perfect but the painters tape trick is a great idea as well.
Amazing solution to my dilemma. You The Man ! 😎
i'm going to do this today! 2016 corolla 198K
Mexican local restaurant. Lol u make my day I work at logans road house and they used too.
Greg!!! You ARE AN ANGEL!! thank you so much for this video!
I just did this and it worked perfectly! Thank you!
any tips on getting out the extra blue tape out of the crevices? i guess in hindsight, i'd say get painters tape that matches the color of your car.
Thank you so much for the video buddy this helped me out a lot with my bumper!!!!!
Now how do you reattach a bumper that's already fallen off? I'm asking for a friend time sensitive.
Thank you Greg, I have this problem on my 2018 Renault stepway. should I take it to the body or try your demonstration above?
Many thanks Greg, pretty pleased that I can do this repair myself. The alternative has large dollar signs attached to it for sure.
i did this a week ago.
seemed to work.
now it's coming apart.
i'm giving him thw benefit of the doubt tho. inlive in Palm Springs CA where it's been 110 degrees everyday.
maybe its the heat
Worked for me. Thanks Greg!
More videos on hacks for minor repairs would be great.
Thank you for sharing this! It was very helpful, can't wait to try it.