How to Set Up D-RTK on the DJI Matrice 210

Get your Matrice 210's RTK flight mission ready by following these setup steps.
Need help? Contact us via Facebook Messenger by clicking on this link: m.me/DJISupport
Click subscribe and never miss new tutorials for your DJI gear!

[@panagiotistsamitropoulos3919]

Can the drone go under the bridge and keep position stable?if it goes under of the bridge 2 antennas stops working.is it possible to have it stable under the bridge?

[@jamesboyd4358]

The RTK Base station to the Drone will work unless you put a camera on top. If the top camera is mounted you must change out the right "RTK" puck with the additional one (antennae puck) provided.

[@davidwim]

So your bringing back DJI Pilot back like how it used to be when I first got my P3A, nice.

First of all, thank you so much for your videos. I would like to ask you for a little help. We are working in solar farm inspection and we use an M210 RTK-V2 with two transmitters. The problem we have found is, that as soon as we link the D-RTK-2 one of the transmitters is disconnected. I mean that it seems impossible to have three devices linked to the M210 at the same time. We have made a hundred tests and, whatever the third device we try to link, one of the other two is disconnected. I have tried to get information from everywhere and I could not find anything. Obviously, we need to fly with RTK as well as a pilot and camera operator. Would you be so kind as to tell us if you have any information regarding this issue?
Thank you very much in advance for your attention!
Best regards!

[@DJITutorials]

Hi there, please note that D-RTK 2 High Precision GNSS Mobile Station For Matrice Series cannot be used when using Dual Remote Controller Mode. Thank you for your attention.

@@DJITutorials Thank you so much for your answer. Unfortunately, I had discovered the problem by reading the complaints of other users in the DJI forum.
To be honest this issue should have been warned by DJI in the product manuals.
Anyway, M210 is a fantastic machine and we are trying to solve the problem. To do it I would be very grateful if you could possibly give us some additional information.
I am an Electronic Engineer and I have in depth analyzed Occuysnc 2.0 with an RF analyzer. I think the problem of linking 3 devices at the same time is impossible to be solved with a new firmware release since my feeling is the limitation comes from the receiver hardware.
Would you be so kind as to confirm me whether I am right or not?
On the other hand, Could you please tell us if DJI is thinking of any kind of solution?
I would be really grateful if you could answer me since we have found an expensive and complex solution. A confirmation from you would be enough to start working on it.
The idea is to buy a multiband Rover and Base from Emlid (RS2) to create a virtual NTRIP caster. Once this is created we should receive differential corrections trough the modem connected to Cristalsky. Take into account we are working in Morocco or Kuwait were no GNNS network is available and we cannot directly use the 4G modem.
Looking forward for your answer 8-), best regards from the North of Spain!

[@povride276]

Hi, is drone is capable working with dji goggles ? And can you use zoom option on via knobs or buttons Cendence RC ?
That you can fly without remove goggles at any time.
Greetings

[@DJISupportGlobal]

Hello Mateusz, M200 series doesn't support the DJI Goggles set currently, thank you for your attention.

[@aramali3027]

@@DJISupportGlobal Hellow please answer me
thes matrice 210 rtk v2 use for Engneering for surving worke
Thank you very much
Best regards!

[@DJISupportGlobal]

@@aramali3027 Hi Aram, could you please tell us more about your inquiry? Please send the details to us via email at [e-mail] so we can help, thank you.

[@alexGarciaLancaster]

Hi. Does the RTK system improve photogrametric survey? I wonder whether I set the RTK base can be on a topographic bench mark and then I take a number of photos with the vartical camera (0º); would I get each photo georeferenced to the bench mark? In that case I wouldn't need GCPs?

[@guitaroon]

I think the RTK is only used for the positioning of the drone but not on the images so you would have to set an additional ppk system

[@alexGarciaLancaster]

Arturo Rodríguez thanks. I checked around and it is just as you said.

[@Sir.K2]

RTK is just for increasing the mapping accuracy.

[@AboveandBeyondGlobalDrones]

@@Sir.K2 > It is Position of Drone in Relation to Position of D RTK Base station only.

[@rogiervdheide]

@@guitaroon that is correct

[@1timeemailaddress811]

So is this RTK thing considered triangulation?

[@authentic4225]

What is the purpose?

[@rogiervdheide]

very accurate positioning, for centimeter-accurate surveying and so on

[@dust45a]

That’s way to much going on. Need to make it simpler to setup.