Unlock the Solution for Non-Genuine Battery Message on iPhone 11 Pro Max XCAP BMS
HTML-код
- Опубликовано: 12 июл 2023
- Prime Rechargeable Battery Cell for iPhone 11-14 Pro Max: www.diyfixtool.com/products/p...
Pre-Programmed Battery Tag-on Flex Cable For iPhone 11-14 Pro Max: www.diyfixtool.com/products/p...
If you replace the battery on your iPhone 11 Pro or iPhone 11 Pro Max, you will lose the Battery Health feature in the settings. You will also get an "Important Battery Message" pop up, implying that the battery has issues.
But if you follow along with this video, you'll see how to replace the battery on this iPhone 11 Pro Max and avoid the notification
▶Need a repair? Request a quote now: www.vccboardrepairs.com/conta...
▶Here's what you'll need:
iPhone 11 Pro Max XCap BMS Battery: www.injuredgadgets.com/xcap-b...
iPhone 11 Tag On Flex: www.injuredgadgets.com/xcap-b...
Relife Spot Welder: s.click.aliexpress.com/e/_DE5...
Ceramic Scissors: www.injuredgadgets.com/relife...
Grinding Pen: www.injuredgadgets.com/w-05-m...
USB Meter: amzn.to/3xKji3t
Here's a rough breakdown of the steps, but make sure to fully watch the video to understand the process:
Step 1: Remove stickers over the BMS board
Step 2: Using ceramic scissors, cut the battery leads
Step 3: Grind away the original battery leads off the BMS board
Step 4: Spot weld the XCap Battery leads into the BMS Board
Step 5: Wrap the BMS board with the rectangle sticker
Step 6: Fold the BMS board to fit up against the battery cell
Step 7: Apply the plastic cover over the BMS and wrap it with the other sticker
Step 8: Fold the battery connector backwards & connect the tag on flex to the bottom connector
Step 9: Connect the battery into the housing & use a charging cable to boot the phone. DO NOT USE THE POWER BUTTON
Step 10: Wait for the phone to boot & check the battery health. You're supposed to see the Important Battery message.
Step 11: Shut down the phone (Vol up, down and hold power and swipe to turn off).
Step 12: Wait like 15-30 sec for it to fully shut off and then boot again with the power button this time
Step 13: Check the battery health. You'll see it's at 100% now and no notification about genuine parts
Step 14: Remove the tag on flex from the battery and plug the battery back into the phoen
Step 15: You'll see the battery health is still working & still no notifications.
Done!
Here’s a full list of my solder tools: www.vccboardrepairs.com/gear
▶Subscribe for more phone repair tool reviews & tutorials: ruclips.net/user/vccboardrep...
▶Need to recover your data? Request a quote: www.vccboardrepairs.com/conta...
▶Useful Links◀
Crowdsourced repair solutions: repair.wiki/w/Repair_Wiki
Join my Locals Community: vccboardrepairs.com/locals-co...
30 Day Microsoldering Starter Course: vccboardrepairs.com/solder-co...
90 Day Advanced Solder Course: vccboardrepairs.com/90-day-co...
Buy a shirt: merch.vccboardrepairs.com
▶Phone Repair Videos◀
Microsoldering Repair Videos: • How To Fix iPhone 13 w...
Data Recovery Tutorials: • Where To Copy Your iTu...
Phone Repair Tool Reviews: • LIVE! iPhone 6S Plus O...
▶Best Thermal Cam Setup◀
Seek Compact Pro: amzn.to/34I4whX
Seek Stand: vccboardrepairs.com/buy-seek-...
Seek Macro Lens: www.vccboardrepairs.com/buy-m...
▶Social Media◀
Facebook Group: vccboardrepairs.com/vcc-fb-group
Facebook Page: / vccboardrepairs
Instagram: / vcc_board_repairs
TikTok: / vcc_board_repairs
▶About VCC Board Repairs◀
We are a Las Vegas, NV based repair shop who offers mail in repair services for microsoldering repairs & data recovery. Our specialty is iPhone, iPad, Samsung and other mobile devices. We also offer B2B pricing for repair shops. Contact us today for a quote: www.vccboardrepairs.com/conta...
▶Affiliate Note◀
This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
Why does Apple hate independent repair shops? We have to go through all this mess to retain an iPhone's basic feature, which is unecessary. If you want your battery health to remain, you must go through Apple or one of their authorized repair centers. But now, using the Xcap BMS solution, you don't have to! You keep your battery health & no "non-geniune" notification.
Is this feature important to you? Let me know down below!
I can't find the link 😢
Your attention to detail in every step is what sets your tutorials apart
The clarity of your explanations is 2nd to none!
Just watched this and I'm seriously impressed with the detail in this tutorial!
Jesse, keep up your videos you're awesome! i have learned so much from you and your FB group!
Awesome! Thank you!
I appreciate how you explain each step so thoroughly
Finally, a clear explanation on how to replace iPhone 11 Pro Max battery
Thanks for sharing links to all the tools needed.
So clear and precise
Nice video 👍🏻 You explained and did it very well
Love the final product!
This is revolutionary for iPhone repair!
Saludos Jesse , excelente trabajo ! Ahora bien : si cambias flex de la batería original hacía la nueva batería todo ok! Ya no hay problema con el reconocimiento. Porque le colocas el flex de batería?
Gracias por responderme 👌👍
Jesse, can you test the ampsentrix batteries from mobile sentrix? They come with a preprogrammed add on flex for BMS swaps. Ty
Your step-by-step guidance makes this look doable
easy to follow!
Your knowledge on iPhone repairs is impressive
Great job
valuable info and very details #kudos
thank you for your great video I can't find any better video before your youtube!!!
Wow, thanks!
Them sparks make me jump too 😂 good vid man thanks 😊
hahah glad I wasn't the only one 😂 Thanks for watching!
Hey verry good video ! My question is is this also for iPhone 13/14 ?
DIY iPhone repair GOD!!!
Watching this video has given me some confidence
Nice job keep going ❤love your videos
Thank you so much!!
@@VCCBoardRepairs I actually remove an old bms on 13pro but discover that it does not power on the phone anymore, also the mechanic w801 spot welding machine actually burnt the nickel plate of the battery
Hi Jessie and thank you for your amazing videos. Do you know if we can get these batteries here in Europe?
Yes, Injured Gadgets ships to europe! Or reach out www.replacebase.com/ and see if they have any
Hey just want ask if I can use OEM battery with flex attach to remove the flex and replace with the old one original so I will not weld
No that won't work
Thanks you for your video Jesse! I do have a few questions:
1. How come you didn’t use a programmer?
2. Can you re-use the tag on flex for another battery or will you need a new one?
3. If I can suggest, can you make a video of bms swap from an oem battery to an oem battery? I tried like 10 times, and the new battery always makes problems. Thanks you very much
1. The Xcap BMS solution does not require it
2. Yes, you can reuse the same tag on for multiple devices
3. I am not sure that works. That's why i use the Xcap BMS solution
@@VCCBoardRepairs Thanks you for replying. One last question, do you think the xcap tag on method, will work with another battery which is not from xcap factory?
@@eLab43i was wondering this too.
Good vid. But just in my experience I never shave or clean the BMS I just trim the excess and spot weld right over the previous tab. Never had an issue doing it that way.
I may have to try that!
Hey Jess , first thank you for all the knowledge you share on here ❤
My question is I followed the steps and did 2 iPhone 11’s and it worked perfectly , but when I did an iPhone 12 mini and 11 Pro Max it copied the previous battery health and phone don’t charge any more , even tho it boost when charger plugged in :(
Any suggestions?
Thank you
Boots *
Are you using Xcap BMS battery and tag on flex?
Hi, i just wanna ask a question about the tag on flex. Can i reuse if i change the battery again for the same phone
Yes
Hi thanks for your video which phones supported??
XS and newer
@@VCCBoardRepairs thank you
What if you use soldering iron on the bms instead of spot welder on the battery. I wonder if it works.
I've heard some people say they've done that with success. Although I haven't tried it myself.
Hi. Quick question. Do i need to keep the tag on flex if i use the JC tag on flex? Thank you
I don't know. I only use Xcap
Is this required for the 8Plus ?
Hello
I have been in Texas for 3 days and I wanted to buy repair equipment such as heaters, loops, and programmers, and I do not have any sites in mind.
ebay was too expensive
Can you recommend a site where I can buy repair equipment at a fair price??
Check out my recommendations
Www.vccboardrepairs.com/gear
the toggle on flex needs to remove after the procesa of showing the battery heatlh?
You can leave it in if youwant
I do this with the MobileSentrix Amp Core batts and with the Qianli welder and Qianli tag-on flexes. Honestly you don't have to grind any part of the terminals off the BMS (unless you know for sure the connection is shot - but that's rare after cutting off a BMS from an OEM batt. Skip the grinding and save time, those connections /welds on the BMS should be just fine as long as you don't man handle it while removing BMS from OEM batt. Sio juat use what tabs are on there and weld the BMS to the new batt.
Ah that's interesting! I'll give that a try next time
I have tried with the qianli welder only once, what settings do you have it at? i tried automatic at 2nd level and it seems very weak and i tried at 3rd level automatic, but it is just making holes through the metal.
Also my first attempt was a mess and ended up breaking the connector cable from the BMS...
Are the mobile sentrix batteries supposed to be installed the same way Jesse shows us in the video?
@@trainyourbrain4420 I use the automatic power setting that is two bars away from full....so two bars on the left are not lit up. Also, use a light touch to the metal when welding or the welds will not take. Yeah the Mobilesentrix batts are basically the same - prob made in the same factory.
@@daviddenson3324 I'll give it a try next time. Do you have troubles when folding the battery flex back into position?
@@trainyourbrain4420 not enough to matter much
That technique is somethin else..
Hey so aside from taking the phone to Apple themselves, is there no way to remove the non genuine battery message when installing an Apple replacement battery?
starting on iPhone XS and newer, that's correct.
Or do the method i show on this video
Hello am sending you greetings frOM KENYA
Hello there!
Hey Jesse, i hear ios 16.5 breaks this repair method, any word on that?
These phones have 16.5.1. they're still working fine
@@VCCBoardRepairs ok thanks!
Hello, I am waiting for your reply. Can you introduce me to a site so that I can buy mobile repair equipment from it in America????
Www.vccboardrepairs.com/gear
Heard that on iphones with ios 17 version this method doesn't work. Is it true?
I haven't heard that
When was the last time you have changed battery using this method?@@VCCBoardRepairs
Hello. is there any help if bms is broken on iphone xr
Nope. RIP
Yes, you can transfer some ICs from the original bms to a second, pulled (OEM) flex.
Is the tag on flex re usable ?
For XCap BMS solution, yes, you can reuse the tag on flex
It is not good idea to remove battery tag. After first update of iphone it will be shaw error massage and last persents.
It is not good idea to remove battery tag. After first update or reset of iphone it will be shaw error massage and last persents.
Do you have experience with XCap BMS Batteries?
in this video i couldn't see your battery health programmer your original battery was 80% after that 100% battery health without programmer maybe did you skip the programmer process in the video?
No programmer is needed
that was alot of steps
I'd be to scared to try this on my iphone
Greetings from Nigeria
Hello from USA 🦅
Why are you not using the battery spot welding bench clamp
I think I'd give up after the first 3 minutes
I‘d say it’s unnecessary thing ever what Apple does. I mean you can reprogram the old original battery to 100% battery health and clear the charging circle… sure a good technician can find with other Programms or diagnostic tools the real capacity, health and so on but a normal person couldn’t. I wish that Apple would sell their replacement parts for lower affordable price in Europe the price starts at 120 euros they raise their part prices since at beginning this year… and I think battery and cameras are so unnecessary to serialize it to the logicboard. I mean what’s the problem?
Totally agree!