I make my own drippers out of aluminum bolts . I drill small holes with different small drill bits to get the desired size I want , very easy to do and you save a potload of money .
Pro tips: make sure you have a way to control the heat on the burner. Use pure lead for best results. Alloys, like range scrap, are more "runny" so pellets come out smaller than expected and less spherical. Pure lead also maximizes the weight per pellet. Wet tumble for 4 to 6 days(doesn't have to be all at once, 1day X 4 to 6, 2days X 2 to 3, ect...). Rinse with cold water to reduce oxidation, spread on towel to dry for a couple of days. Tumble with about 2.5CC of graphite powder per about 9lbs, for about 6 to 9 hours. Load and make ready.
A little tip, go to your local Napa car car park store and get mail threaded. Cand Take a drill press and drill the size of shot you want. It will save you a lot of money.
I make my own drippers out of aluminum bolts . I drill small holes with different small drill bits to get the desired size I want , very easy to do and you save a potload of money .
Pro tips: make sure you have a way to control the heat on the burner.
Use pure lead for best results.
Alloys, like range scrap, are more "runny" so pellets come out smaller than expected and less spherical. Pure lead also maximizes the weight per pellet. Wet tumble for 4 to 6 days(doesn't have to be all at once, 1day X 4 to 6, 2days X 2 to 3, ect...). Rinse with cold water to reduce oxidation, spread on towel to dry for a couple of days. Tumble with about 2.5CC of graphite powder per about 9lbs, for about 6 to 9 hours. Load and make ready.
I made mine with a rivet gun part and a wire .it worked.
When times get tough don't be bashful. You can use driveway gravel in a pinch. Just sayin'
A little tip, go to your local Napa car car park store and get mail threaded. Cand Take a drill press and drill the size of shot you want. It will save you a lot of money.
Dang you really look like Dwayne from Dry Creek Wrangler School
If you melt down lead use a wax toilet bowl ring to draw out impurities.
You can also use a white candle or saw dust works really well also
Hi, where is the follow up video from this ? I want to see your shot being made
You won’t see it cause it don’t work I bought a machine and the lead doesn’t get round it’s more flat
Semper fi mac!
Hey saw your dacebook post so i said i give you a subscriber. What part of az are you from.
I am in the west valley, Peoria
do u sell your shot,,if so do u have #4 shot?
Sorry no I do not sell my shot.
ok just asking@@ROBERTMADDEN100