2003-2007 Dodge 5.9L Cummins Quick Spool Compound Turbo
HTML-код
- Опубликовано: 22 авг 2024
- The New Cummins 3rd Gen 5.9L Quick Spool Compound Turbo Kit was updated from its original version in our strive for perfection. This kit utilizes our industry leading turbo technology with a redesigned piping kit to offer the easiest install with the most reliable parts on the market. We designed this kit with a new dip stick tube and a/c retrofit line so you never have to bend and possibly break a line again. If you are looking to lower your EGT's without sacrificing drive-ability the New Quick Spool Compound Turbo kit is the perfect match for you.
Features:
Perfect fit turbo kit comes with everything needed to install
New A/C line & dip stick tube (no more bending!)
Ceramic coated & heat wrapped Hot pipe
Cold pipes and compressor housings are powder coated high gloss black
Turbo sizes: Manifold is a PhatShaft 62/65/12 and the Atmosphere turbo is a 75/96/1.32
High flow 5" intake with S&B oiled filter
Firewall heat shield with II Diesel logo
Suggested upgrade would be a two piece exhaust manifold.
Lowers EGTs
Capable of 850hp with fueling upgrades.
Kit with Turbos - 227456 $5168.43
Kit Only - 227456K $2525.00
www.industrial...
Cheers Chase 🍻 Always love watching these uploads, too bad UCC got canceled this year but it doesn’t matter Shawn will Shred the Competition Next Year 🏁🏁👍
Thank you for watching! hopefully next year will take the crown...
What RPM will this typically start making boost, and what RPM does it reach max boost? I’m assuming this is on a 5.9 CR with fuel upgrades.
Valid questions
Can you keep passeneger side battery with this kit? I use my 2nd battery for my trailer charging system and all electrical connections. Don't really wanna clutter up the driver side battery and be down to 1 battery
I'm not familiar with what is exactly different between the stock HE351 and the drop-in phatshaft turbo. Would this work with the stock turbo or does it have to be the phatshaft turbo?
Have you ever noticed a decrease in power after going from a single to compounds?
That's kind of loaded question because the size of turbos dictates that entirely. A single 488 would make more power than an s475 over stock but that compound setup is excellent for daily driving and towing where the 88mm would be a laggy hot pig.
@@dontworryaboutit1 I should have been more specific, like on my setup, ran a S475 as a single, then went to compounds with it and a S464, lost quite a bit of power and had to gate it.
@@wild12valve yeah torque comes in quicker but I think it chokes up the 75 having to flow through the 64 and air gets hotter going through 2 turbos at wot
@@dontworryaboutit1 it's cool too because just playing with the external gate I ran around 70psi, then 40psi, only lost .100 and 1mph is the 1/4. One thing I noticed is boost actually rolls in slower say from 20psi to max compared to just the single. I believe it's because it has to spin two turbos up to speed instead of one.
@@wild12valve yeah and at lower boost your 75 isn't flowing what the 64 is trying to suck in so it fights that. They definitely aren't the answer for every situation but compounds have there place
My ‘04.5 WILL have this.... do you have a part# for the kit? Are factory injectors good or will I need to get those too?
Dose the 6.7 Cummins need a blow off valve for this kit?
I haven't seen a turbo blanket that isn't carbon fibre style lol
Any kits like that for the 2007 6.7??
Does anyone make a TurboCompound setup for the Cummins!?
It’s almost like this video was about that
@@JPGenergy A Turbo Compound and a Compound turbo setup are 2 different and separate things
Any kits for Cummins isx15?