Thank you! Bought an a51 from the thrift store for $5, would not charge, did this and its working! Bypassed FRP and its fully unlocked and working at cost of $0 to fix ! Cheers !
Hello i did it , and it works thank you !!I've just have a question .i have power from sub to main ...5volts..like you.... Why is the extra cable necessary ?
I've already ordered that flex cable, I'll get back to you with a comment when it arrives, if it doesn't work I have to do that in this video too 🤦🏻♂️
@@furiouskiller1992 Thank you very much ! I will wait your answer.. For your information I did as the video suggest, making a wire connection, ... and it worked.
@@mz6288 Hi, the flex tape arrived after changing it the loading function works again, so if you don't have a soldering gun and don't want to do the whole job just order the flex tape and replace it 🤠 👍
I recently did a battery change on an A51, i used a plastic pry tool to remove the cable like I've been doing for over 16 years and how tightly the cable is plugged into that connector on the logic board caused the ground pin to disconnect, when i looked at it under the microscope i was so surprised but jumping ground from main to charge port board fixed the whole charging problem now idk how to avoid that problem cuz unleaded solder is trash so if a cable is plugged in nice and snug and you remove it it could happen on any phone
"easy tricks" expects us to have a science lab at home
Thank you! Bought an a51 from the thrift store for $5, would not charge, did this and its working! Bypassed FRP and its fully unlocked and working at cost of $0 to fix ! Cheers !
Hat super geklappt, DANKE ....super Tipp....weiter so 5 Stern.
Thank you very much bro it worked 💪 🙏
Thank you from pakistan❤❤❤❤❤❤❤❤
Super thanx
I tried now and its work thank you
This fix worked for my phone. Thank you so much for the helpful video!
Before make jumper, first to measure the current. It just for broken ground
Great video it s worked.
Thanks!
You're welcome!
Nice solution. im bent litle 1. pin on motherboard connector and work fine. Tnx man
OOh my god !!! it worked to me no problems so far .. thank you i also subscribed.. keep going
thnks bhai charge hone lg gya 🙏🙏🙏
Thenkyu so mach sir 👍हो गया
Thank you sir is working ❤
You're welcome! 😃
Thank you sir jee its works for me also
Terima kasih bang.. semoga banyak rezeki dan panjang umur.. amin
অসাধারণ কাজ ভাই।ধন্যবাদ
thank you bro now its working super😊
Alle Achtung,Funktioniert wieder ohne Probs dank ihrer Anleitung A51 nochmals ein grosses Dankeschön an sie !!!!!😀
Thank you. It really works.
Hello i did it , and it works thank you !!I've just have a question .i have power from sub to main ...5volts..like you.... Why is the extra cable necessary ?
1 weeks 2 weeks After coming same issue
gread video man. it.s workt for me. i have the same problem
Same issue .job done👍
You just made me £40 thank you
Usefull video ❤❤
Wow This really work!! I want to donate to you . Got PayPal ?
thanku so much Guru ji...successfully
100% solved bro thanks
Thank you ji...mera ho gaya
It worked for me, thanks a lot
Thank you so much for the help
Thank bro.its perfect
100% work Wooow bro your great
Thnxx sir🎉
master thanks...am done
شكراً لك تحياتي❤
works like charm thank you
Hi, very interestig your video !!!
do you think that replacig the flat cable it can fix the issue ?
I've already ordered that flex cable, I'll get back to you with a comment when it arrives, if it doesn't work I have to do that in this video too 🤦🏻♂️
@@furiouskiller1992 Thank you very much ! I will wait your answer.. For your information I did as the video suggest, making a wire connection, ... and it worked.
@@mz6288 Hi, the flex tape arrived after changing it the loading function works again, so if you don't have a soldering gun and don't want to do the whole job just order the flex tape and replace it 🤠 👍
@@furiouskiller1992 Thank you very much for the information !!!
It is important !
Thank you i will order the flex cable and try again
Work 100% thanks!
Tanks is good working 🥰
❤❤❤good
Thanks sir ji 100000000 working
Thanks 👍👍👍😇
I do that but still dont charge my phone.Other solution?
thanks bro...................
You are the best. 10x.
Thank you bhai its working
Terima kasih❤❤❤
good job bro thank you
Good wark bro
Thank you👍
Thanks it worked
What type of wire is being used to make the connection?
thanks boss🥰
Can I solder the wire to the other side on either port
Thanks bro. It's works.
thanks bro
Works :-) Thank you.
Браво! Super Great solution
Helpful
Ty bro
good
Thanks sir it's working
Thanks! Works for my Phone!!! Regards
Thanks you sir
Nice information
Thank you sir thank you
super ji
Thenkyu so mach
Thanks sir ji
Why is it necessary to do this modification ? WHat was got broken ?
Nice video sir
Thank you ji
tnkyou so much
Thank you!
Kaha se h aap
thanks,
عالی
What causes this problem? How does this solution fix it?
I recently did a battery change on an A51, i used a plastic pry tool to remove the cable like I've been doing for over 16 years and how tightly the cable is plugged into that connector on the logic board caused the ground pin to disconnect, when i looked at it under the microscope i was so surprised but jumping ground from main to charge port board fixed the whole charging problem now idk how to avoid that problem cuz unleaded solder is trash so if a cable is plugged in nice and snug and you remove it it could happen on any phone
Thankyou bhai
Thanks sir 100%
thanks
Thank you
thank u boss
God bless ya son
Gracias !!!
Am an engineer, there is a phone on my custody samsung a51 is not charging, so I need solution. Thanks
good job
Is it solved?
Tenkes😘
Tnxxxx
Good
Bhai minuswali line di kiya
🎉
شكرا لك
How tf is this easy lol
It's easy 😂😂😂😂
Fir bhi charge nai ho raha
But we dont have those materials needed
Hawai Y9 Premi camera chahiye mujhe Uppar ka
Куда он макает припой ? Кто знает