Fix Bricked Flight Controller Not Flashing Firmware (STM32 ) inav, betaflight, ardupilot, etc.
HTML-код
- Опубликовано: 16 дек 2021
- The tool you need is this one www.st.com/en/development-too...
If you have that typical problem with your flight controller not connecting to your PC or it's simply bricked for some reason, then you should try this method.
Join our Discord server: / discord
Website
joyplanes.com/
Become one of us:
goo.gl/zKQ706
Facebook
/ joyplanesrc
Instagram
/ joyplanes
#JoyplanesRC #HobbyRC - Хобби
Thank you, your advice unbricked my Mobula6. You are the Man!
Where’s the boot button on mobula6?
Thanks for this very informative video. I used your instructions and brought a F 405 back from the dead.
Wow, thanks! All afternoon I’m trying to put px4 on kakute H7. Nothing worked until this. I think I will learn STM32Cube Programmer.
No way! In the whole internet there is only your guide which worked for me! Thank you!
I will create a video in russian referring to you is that ok?
This worked perfectly, thank you!!!!
OH MY GOD, THIS WAS SO EASY, AND IT WORKED THE FIRST TIME!!! THAN YOU SUBSCRIBED AND LIKED!!
Thanks a lot for you help, i could recover my bricked Pixhwak 2.4.8 Chinese clone which got bricked during down- grading firmware on mission planner, thanks once again, God bless.
Thank you so much! This saved my Tinyhawk 3 :D
Many Thanks for this video!!!
Thank you! Very helpful
Thank you . Help alot with your Solution
Really works perfect 👍👍
Thank you, you saved a lot of my Neuron cells
Thanks, you solved my problem
SUBSCRIBED! Thank you!
now I wish I hadnt thrown my lasy flight controller out that was doing the same....
Thanks! Works fine with old SP Racing F3, but I used UART connection instead USB perhaps Win drivers issue
YOU ARE A LIFE SAVER!
tq bro 🤗 u r god to me in this
Thank you!!
Thank you!!!!
What is, if you do not have a boot button? I like to flash a F35 lightning FC - how to connect this one with the cube programmer??
You saved me. Subbed. This software is so unintuitive and very not user friendly, and the documentation is cluttered and messy, or completely absent.
hey friend, i did the process and managed to update the firmware, but it still fails to open the serial port in betaflight, what can it be?
I replaced the F411 on my Matek f411 wse from another board.
The original fault was that the previous owner of the board connected the Camera in reverse polarity and cooked the FC. The F411 chip had a little hole in it and the board would get really hot and no lights would come on.
Now the red lights come on, and a device is recognized by windows 10 but it says the device malfunctioned.
When following your steps with this program it doesn't get recognised as a USB device and DFU impulserc driver fixer also does not work. Very sad, any tips on other components I should change?
thank you..
Life saver...
Thank you so much for putting up this video. It was meant for me lmao. The program was successful but the accelerometer, barometer, or sensors are not coming up
Glad it helped! But if you're still having trouble then there's a problem with your hardware.
Same Here, all Sensors are gone
It actually ended up working for me
@@farkhodkhikmatov4738 how?
@@freak33a I undated the stm 32 twice
Hello friends, I have a fc speedybee f7 and there is an fpv camera socket with ground, 5v, cc and cam pins. can i use it for sensors with ground, 5v, rx and tx pins? Thank You
is it possible to dump .hex which is allready on FC?
Hello, my sp racing f3 Doesn't go in dfu mode or connect in use mode. It connects on URAT mode only. What can I do? Please help
please tell me, I have an Afroflight 32 board, just the blue LED is on, I flash it as in the video, the blue LED is still on and that’s it, the firmware. naze. maybe you need another firmware Afroflight 32 ????
CPU Broken I think, If u have multimeter u can measure it, Using continuity mode, Measure on 3.3v pad and ground, If short, that 100% Cpu failure
What if it shows ' cannot disable read out protection'
I need help please 🙏 😭, mission planner can't read APM2.8 Controller Board and blinking only red... error unexpected... what should I do
There are so many options when I load the program. Not sure what to do next. I accidentally flashed wrong firmware on my fc.
Noooo I'm so scared to do that I'm looking up every possible way even waiting for responses on tiktok 😅
My board will not even connect so how will I do it my board has a red light on it
You think this would work with the I flight baby Nazgaul woop ?
IF IT HAS ST 32 CHIP, YES CERTAINLY
Did this end up working for you. My baby nazgul is bricked
1:35 there is no Binary to download the file, what to do?
I found the button, on the bottom need to click *Loaded Online Firmware*
opration exceed memory limt eroor. why is that
Please make a plane with the brushed motor and use cheapest material
I'll try that at some point.
@@Joyplanes i wish "some point" would come very soon
Cosmo Rito be happy he is considering ur idea 😊
Helo
Hi
@@Joyplanes em đá đăng ký yuo tube anh rồi nhé 😘
Can I do this on new MCU replacement?