i have a different set of lights but the harnesses look the same and i also did the dual turn signal mod when i got mine wired up the drl on my headlight stopped working any idea what would cause this
@@ZPTVChannel alright thanks, one other thing i wanna run by you, i had the factory wiring for the fog lights but i took it out of the fuse block and didn’t use it i ordered a replacement factory harness and used that, then added the factory switch when i hit the button for my fogs they come on could this be because i didn’t use the factory wiring?
I wa t to put these on myself. I have them aready. I want to use the top for drl's and the bottoms for fog lites. How would i wire the red and black wires and also the two yellow wires?
The red is the pwr wire whiten would be the running light so you would just wire that into the harness behind the light (pic of which wires are which at 4:41 ) the black is ground I just attached it to where the lights are grounded on the frame be hind the front bumper. And the yellow are for the turn signals you’d wire them into the turn signal wire if you want them to work ( also found at 4:41 ).
@dmaxxd.lly94 they sell some that only have the running light. I’m not sure if it’s amber or not though. With these ones specifically they’re sequential so I think if you hook up the turn signal to the running light it might act funny.
@@ZPTVChannel yeah imma have to build a harness to use the turn signal light as a DRL dual function similar to what Boost does with the light inside the tow mirrors yayyy
@ragnarlinn6431 yes! If you already have the plugs then yours is super simple! Just the switch and relay! I had to pin the fuse block and everything because mine didn’t come pre-wired…
I have these to but after I installed them and started the truck they went haywire and flashed without the blinker being on. Did you have any issues with that?
Oh ok. It was weird it only did that when I started the truck. When all accessories were on it worked fine. Did you use the splicers or hard wire the signal wire?
Unfortunately no I don’t have any shots of them at night but the light output is great! I was driving with just these on and the headlights off and I could still see everything perfect!
Hey man I have a lifted 2500hd. My headlights point upwards bc it’s lifted. I’m looking for fog lights that are bright enough at night to see the road. Do you think these would work?
@@ZPTVChannelbut yeah my regular blinkers work I have drl headlights and did the drl mod they all work fine but drl on the fog lights are stuck yellow but and don’t blink but blink with headlights off
@@bigpapa6951 make sure the wires are hooked up right. It sounds to me like the blinker is wired in with the parking light on the fog lights. There should be 2 different wires for both blinkers and then 1 wire for the parking lights they wire into different wires.
i have a different set of lights but the harnesses look the same and i also did the dual turn signal mod when i got mine wired up the drl on my headlight stopped working any idea what would cause this
Looks great! 👍
Nice!
Does the drl feature work without the fog lights on and just the drl bar?
Yes! The only reason mine stay on is because I did the automatic fog light mod!
i have a different set of lights but the harnesses look the same and i also did the dual turn signal mod when i got mine wired up the drl on my headlight stopped working any idea what would cause this
Check over the connection. Could’ve gotten corroded or loose.
@@ZPTVChannel alright thanks, one other thing i wanna run by you, i had the factory wiring for the fog lights but i took it out of the fuse block and didn’t use it i ordered a replacement factory harness and used that, then added the factory switch when i hit the button for my fogs they come on could this be because i didn’t use the factory wiring?
I wouldn’t think so unless you accidentally pulled out another wire as well but my wiring isn’t factory either and it works great!
I wa t to put these on myself. I have them aready. I want to use the top for drl's and the bottoms for fog lites. How would i wire the red and black wires and also the two yellow wires?
The red is the pwr wire whiten would be the running light so you would just wire that into the harness behind the light (pic of which wires are which at 4:41 ) the black is ground I just attached it to where the lights are grounded on the frame be hind the front bumper. And the yellow are for the turn signals you’d wire them into the turn signal wire if you want them to work ( also found at 4:41 ).
Could I swap and run the yellow to the running light to have amber illuminated at all times lol?
@dmaxxd.lly94 they sell some that only have the running light. I’m not sure if it’s amber or not though. With these ones specifically they’re sequential so I think if you hook up the turn signal to the running light it might act funny.
@@ZPTVChannel do they take actual led bulbs or are they apart to fog light housing
@dmaxxd.lly94 they’re leds built in the fog light housing
Is the DRL light amber? Or a way to wire it so turn signal bulb is drl dual functioning
The drl lights is white and it blinks amber when the turn signal is on!
@@ZPTVChannel yeah imma have to build a harness to use the turn signal light as a DRL dual function similar to what Boost does with the light inside the tow mirrors yayyy
Can you do this if you don't have fog Light. Or do you have to wire up to the fuse box an add a switch?
I have a video of adding fog lights! *INSTALLING* FACTORY fog lights on a 03-07(classic) silverado!!!
ruclips.net/video/qszBQbsdeHw/видео.html
@ZPTVChannel ok
I looked at mine and I have fog light plugs an no relay or switch can I just plug then In an add the rest
@ragnarlinn6431 yes! If you already have the plugs then yours is super simple! Just the switch and relay! I had to pin the fuse block and everything because mine didn’t come pre-wired…
@ZPTVChannel ok awesome thanks man
@@ragnarlinn6431 no problem!
I have these to but after I installed them and started the truck they went haywire and flashed without the blinker being on. Did you have any issues with that?
No problems yet but I haven’t had them on very long either. So far though they’ve been great!
Oh ok. It was weird it only did that when I started the truck. When all accessories were on it worked fine. Did you use the splicers or hard wire the signal wire?
@@ChevyBoy9491 I wired it right into the signal wire
any updates on the fog lights i want these for my cat eye
They’re still perfect! Would definitely recommend!!
Any night time shots? How’s the light output?
Unfortunately no I don’t have any shots of them at night but the light output is great! I was driving with just these on and the headlights off and I could still see everything perfect!
@@ZPTVChannel Do they adjust correctly? I tried adjusting mine but no matter how much I adjust them they still point to the sky.
@@casarezamy mine adjusted pretty good. They’re still a tiny bit higher than factory but not much.
@@ZPTVChannel hmm maybe my valence is throwing them off cuz they point higher than my headlights, fully adjusted down!?
can we see how they look during nighttime?
Yes I need to do an update on how they’re doing anyways so I’ll probably do it then!
Where did you get your Chevy emblem from???
It’s the factory emblem, I just painted it!
You need a bad ass emblem go to vh auto they sell nice ones and there probably even cheaper than the factory or the same price at 70 or 80 bucks
Do they need two bulbs or does it just look like that ?
It has 2 leds built in. Unfortunately you can’t change them out so I’m really hoping they last a while lol
Hey man I have a lifted 2500hd. My headlights point upwards bc it’s lifted. I’m looking for fog lights that are bright enough at night to see the road. Do you think these would work?
Yes! I’ve actually ran with just them on a few times! They’re brighter than most peoples regular headlights!
Now you just be to tie it all together with stub back headlight blinkers
Mine are stuck yellow and don’t blink with headlights on but when I turn off the headlights they blink on turn signal
It sounds like you have a wire crossed some where
@@ZPTVChannelwhat’s that mean
@@ZPTVChannelbut yeah my regular blinkers work I have drl headlights and did the drl mod they all work fine but drl on the fog lights are stuck yellow but and don’t blink but blink with headlights off
@@bigpapa6951 make sure the wires are hooked up right. It sounds to me like the blinker is wired in with the parking light on the fog lights. There should be 2 different wires for both blinkers and then 1 wire for the parking lights they wire into different wires.
@@ZPTVChannelwhich wires for the parking light
Is this truck a 2500 or 1500
1500!
i have a different set of lights but the harnesses look the same and i also did the dual turn signal mod when i got mine wired up the drl on my headlight stopped working any idea what would cause this