Это видео недоступно.
Сожалеем об этом.
Miata MX-5 ND GWR RoadsterSport Super Street Exhaust & Blackbird Fabworx Rollbar
HTML-код
- Опубликовано: 15 сен 2017
- I install my new Goodwin Racing RoadsterSport Super Street muffler , axle back exhaust , and discuss my Blackbird Fabworx roll bar in my Mazda MX-5 Miata ND.
Link to purchase from Goodwin Racing, www.good-win-ra...
Link to Blackbird Fabworx Rollbar, www.good-win-ra...
G35 Front wheel bearing video, • Front Wheel Bearing As...
SavageGeese Review, • Review | 2016 Mazda MX...
Dave Coleman going over this cars engineering, • 2016 Mazda MX5 Miata T...
Check out www.ProfRobBob.com, there you will find my lessons organized by class/subject and then by topics within each class. If you'd like to make a donation to support my efforts look for the "Tip the Teacher" button on my channel's homepage / profrobbob
Yes! Bam! Love the channel advertising on the back, congrats on the purchase Mr. Tarrou you deserve it
Thank you:) The back bumper of the G35 Coupe I used to own was like a billboard there was so much flat surface. My advertising was HUGE on that car!!! I have to spread the word you know.
Congrats on your car! I love the sound with the new muffler. You totally deserve this, especially being a great teacher and being the reason for me getting an A in AP Stat and a 5 on the exam. Thank you so much!!
Congratulations on getting a 5 on your AP Stats exam! That is no easy task. Thank you:)
I knew you were a great teacher, but I never knew you were a car guy. This was a fantastic discovery. I've got a Roadstersport 3 on my 1991 and it's excellent. It braps when you stomp on it and gently hums when you're cruising.
I really like the sound, and I like the three levels of sound you can achieve with the easy add baffles that are available. You can run the muffle san baffle, with a cone baffle, and a packed baffle. The last will be very nice on long trips because it can sound almost stock on the interstate. My friend and I just changed the timing belt on his 91 Miata:) Great car.
I had you as a math teacher you we're the best math teacher I ever had
Thank you Clorox. Your whites were all ways the brightest... along with your grades:)
If only someone like him was about to teach you grammar.
I drove 7 hours from South Carolina to buy this car. Looking up Miata stuff on RUclips and bam there is my car. Glad you took care of it. I will take care of it too. They told me it came from a RUclipsr and that you got a new fast car. Congrats on that new car man!
That is so cool! Thanks for reaching out to me. I hope my old Miata will serve you well, as it did me. It is a blast to drive, economical, and reliable. Cleaning the wheels was a pain though! I used a bottle brush in a thin microfiber mitt to reach inside the wheel to clean the surface behind the many spokes. Email me at helpprofrobbobcc@gmail.com and I'll send you picks of the roll bar install. I will post some vids about my new car soon.
@@profrobbob cool Professor. I’ll send you an email real quick. Looking forward to seeing your new car.
love seeing the guy who helped me pass calculus 3 years ago upload non-math videos haha
Every time I see the views my non-math videos get, I say to myself "I am doing this RUclips thing wrong!" Glad I could be a small part of your success in Calculus:)
You helped me earn a really good mark in grade 12 advanced functions, the highest in my class. My teacher wasn't the best but she was still helpful, your videos are a lot of the reason I did well in that class and got into my university choices. I love watching your non-math videos as well, keep doing you. BAM!
BAM!!! and congrats for taking the extra step to make the grades to move forward to collage! Thanks for all the compliments too.
I hope this means you have shared my channel with your class and teacher too so ALL current and future students who choose to study after class will know where to find us:)
When you have to teach math at 5 but drag race start at 4..
HAHA! I lead a dual life:)
Congratulations man, I am glad to see you get something for you, I live in Colorado and you have been helping me out for over a year now with your math videos, glad to see you have multiple bad ass hobbies. Bam!
Also, freaking love the plates man.
My NA miata used to have all Zerek Fabratication safety from the rollbar, door bars, roof bar tie, etc. Ended up getting Blackbird's wing and the build quality alone sold me. Their bars always interested me.. I feel like I'm in the same spot looking at 5.0s, camaro ss, Q50 3.0t, Cayman, Vette's... and I own a 03 G35S Coupe 6spd lol.
7 seven years later and I still own my Miata. So much fun but yet I am getting the new to me car itch😅
beautiful car and great "Do it Yourself" video. This inspires me to check my oil in my mini cooper. Thank you for helping me get through my college math courses ProRobBob. You're my hero. I gotta get back to my chemistry homework...Bam!
There is a lot of chemistry in modern oils! You could send a sample to Blackstone Labs and make that a chemistry lab extra credit project:)
You sounds like a great professor and made an awesome video! I'm here in Orlando and just bought the Goodwin Race exhaust, can't wait. I think that roll bar may be next
I was just about to comment on how is not a good idea to show your tag until I saw "DO MATH" 😂 sweet ride professor!
Thank you:)
just curious, what can someone obtain from your license plate? We all drive around every day showing the world our license plates.
Yeah my boi got a Mazda. Glad for you cause you alone helped me survive my classes with the grade I wanted.
i have the same exhaust. very happy w it
Love my room bar too!
The exhaust studs are 13mm. A battery powered impact removes them with ease.
Gorgeous car! Enjoy your new ride Mr. Tarrou! :D
Great upload, I received my Goodwin Roadster Super Street muffler today, had the same issue with one of the studs getting stuck in the old muffler. I tried everything to get it loosened and used your trick with the grips - phew! Thanks for the tip :) Now my ND GT finally sounds like it should. Cheers from Australia.
By the way viewers, I have heard all the sounds clips from nearly every RUclips video for this muffler - hearing it in real life, it's just amazing!
i dont know how i would get through calc without you
I have a 2017 rf launch with the 155hp motor and a 6mt, and its quick enough. I even get upper 30s mpg on the highway when taking it easy. I plan on putting the same exhaust on mine this summer. Down the road I would love to put a posi in the rear too as mine didn't come with one.
Sounds really good especially around that 3000 rpm mark
Zoom...Zoom!!!
I really like your car! I can't tell you how much you have helped me with your math videos. I also wanted to say you car has as much horsepower as my 450 pound motorcycle :)!
Well I didn't know you were a car guy.. neat!
One wall of my classroom, ok two walls, are covered in car poster or pictures I have taken at Sebring Race Track or car shows! There is a lot of math in engineering cars, right:D
Make more non-math videos!
Btw thank you for helping pass math many years ago, I honestly probably would have dropped if it wasn't for your channel. I'm happy to see youre still at it and wish you the very best!!
Who knows, that might just happen in the future!!! There are a lot more math videos I would like to do too. Thank you for your good wishes. Hope you are doing well.
a simple 5 minute job can take 1 hour sometimes - happens to everyone now and then. With removing those studs - one more idea, a little heat on the flange might have helped. The double nut idea is a common trick used by many mechys. If all else fails brute force with multi-grips or pipe wrench with a risk of damaging the stud.
My friend that helped with the roll bar has more tools and could have helped in heating the flange. Thanks for the suggestion for any of my future adventures:) All of that time and minor damage to the one stud would have been saved, had I just tried to get out the stud stuck in the old muffler first with the channel locks since the double nut idea did not work! Or had I had a spare nut sitting around that fit the threads...
I have that car too!! Club, bbs, brembro’s, first Miata. Love it. Really like the roll bar. Yeah, thought it might be lacking power, not so. Find a bad review on any Miata, go ahead, I’ll wait. 🤔🤔😂😂😂 If your a car guy, your gonna like it. Oh yeah, that’s sounds great!! I saw one of Brian Goodwin’s posts...it is just perfect.
The sound make the car even more fun to drive... Thank you!
Enjoyed the video, also nice car
Since the exhaust takes up less space underneath, is the underside aerodynamically affected? Does it create any stability issues at higher speeds? I watched a video of someone installing a Verus rear diffuser and claims it helps with the above issues due to smaller exhausts
I had no idea you were into cars haha. Obligatory don't drink and derive joke. Isn't it great driving a 2300 lb roadster? I'm glad you chose a car with pure handling and fun!
Wow what a car! You deserve it sir :)
THANKS!!! Gotta have some fun after making all those math videos...BAM!!!
You said 1/2 in was as close as it got to get the studs free
Did you not think to use a metric size on the studs?
It is a Japanese car after all 😊
Nice video and install. Very relevant to my interests! :^)
THANKS...please share:)
Sounds nice I like it
I'm really happy with it...thanks!
I knew Mr tarrou was cool but not this cool. Good purchase man
The car is Savage:D haha Thanks!
Sick ride!
Thank you.
no way! you watch savagegeese! hes my favorite!
His channel just keeps getting better too:)
hey thanks for the video. Where did you get the body kit? love it
THANKS for watching!!!
It's just the factory kit that comes with this wheel package and I added some red pinstripe tape and the red roll bar!
just had the exact Fabwork rollbar installed on my 2023 ND. It was installed by a shop. Not confident enough to do the install myself. After the install I notice the roof lever located between the 2 headrest is alot harder to lift up now. Shop said the lever assembly is now bolted onto the roll cage. And that it was normal. I was wondering you had the same experience?
Yes the latch is bolted to the rollcage. Mine initially did not have enough bite and I had to add a washer or two to lean the latch toward the front of the car.
"DO-DMATH" haha love it!!
I always reminded that it's a good thing I'm a math teacher and not an english teacher...lol
Anything you don't like about the new muffler?
I did not remember when I made this video, because I was so excited to install the muffler, that it comes shipped with a preinstalled cone baffle. It is right at the tip held in with one bolt. I generally drive without a baffle..no cone or the optional packed baffle I purchase for about $30. With no baffle there is even more burble and popping than you hear in this video. It sounds great. The only negative is the large amount of bass sound decelerating around 1800-2200 rpm driving slowly. It is overly loud off-gas driving slowly. I also would not want to drive on the interstate for hours on end without a baffle installed. It is not obnoxious, just my preference. Want to cruise around with the wife or take a very long drive? Just take 20 seconds and put in one of the baffles. So there really are no negatives. You can adjust the sound to your liking for little to no money. You have two sound levels, or 3 if you purchase the small packed baffle. I LOVE THIS MUFFLER:D
Thanks for the update, it was very helpful!
You're welcome...thanks for watching!
Thanks very helpful! Did you mean to say "It IS overly loud off-gas driving slowly", or it is not?
Sweet ride
Thank you
Awesome!
THANKS!
Love the license plate!
Thanks..good thing I don't teach english huh?!:)
Where are your skirts and lip from? I am looking for red accent skirts and lip for forever
The red accent stripe is red vinyl tape I applied. It takes some trial and error, but a roll is cheap on Amazon and still looks like new 6 years later.
@@profrobbob thank you bro, looks awesome, definitely will try🫡
@Pety 12 Once you get the end of the tape attached you need to run out like three feet with the hand holding the vinyl tape. Then either use the other hand to help the tape lay down or just use your eye from a distance. There is definitely a learning curve and trial and error, but the tape is cheap.
@Pety 12 The longer you can run out the attached tape and lay it down from a distance, the easier to get a straight line.
Did you have any issues so far with this exhaust??
ur a god tarou have fun with the car
THANKS!
Dam you got wheels!!! You deserve it!!!
Thank you:D I know I am going to have this car for a while so I splurged a bit!
Which sound setting did you setup? I'm about to install mine but can't decide on whether to go for the mid bass/mid tremble or full tremble.
I purchased the optional packed sound baffle to complement the included baffle. With 3 sound options I run the exhaust with no baffle:D I absolutely love this muffler and still get tons of compliments on my car's sound.
wow
:)
Did you paint the red lines on the aero package yourself or did you have someone else do it? I have the same car and I like the look it gives yours.
$5 roll of 1/4 inch vinyl tape purchased on Amazon. I installed the pinstripe 3 years ago and it still looks great.
@@profrobbob Thanks man. It kinda looks like the DAMD lip kit.
Nice car.
Thanks!
Nice car !
Thanks:)
love the car prof
Very nice ❤
Thanks 🤗
So did you need that donut gasket or nothing besides the new muffler??
No, I did not need the donut gasket.
Today we will talk about the benefits of being a great math teacher :)
(In this video) Is the sound just from the GWR exhaust or did you delete a cat?
The sound is just from the GWR exhaust with a pre-installed cone baffle, no cat delete. I did not realize the free cone baffle was pre-installed with my excitement. It is a bit louder with a touch more burble with the baffle removed. There is a single bolt under the exit pipe you can remove to take out the baffle. The only time the exhaust is slightly annoying is coasting/decelerating with the RPM between 2000-2600 at slow speeds. BUT, I love the exhaust overall!!!
Ok thank, Could you please send me the link to the GWR Exhaust?
Here you go!!! www.good-win-racing.com/Mazda-Performance-Parts/MX5ND/Exhaust.html
great
:)
Do you have headers in the video?
No I do not.
0:11 Out here in my driveway, just got done uploading some math videos.
I got through my first year of teaching HL Math in our school's IB program. I learned a lot and now have time to post more math videos again😁👨🏫
G35 GONE!?!?!??!
It doesn't sound like it should until you hear the turbo spool.
My car does not have an aftermarket turbo.
@@profrobbob I know. That's why I said it ;-)
@@TheNaqoyqatZ I was suffering from turbo lag:D haha
@@profrobbob haha
Dang Rob Bammmmmmmmmmmaaaaaahhh
I'm surprise this guy can afford a Miata with his teacher salary.
Trieu Nguyen Your net worth is not defined by what you make, but by what you save. ruclips.net/video/epgM-V4c4jU/видео.html I don’t waste money drinking at bars, i don’t smoke, I don’t buy $3 + coffee every day, I am not too proud to go to thrift stores. RUclips ad revenue is a supplement income now thankfully, small investments made when I was very young, etc. Now I have a really fun car that I love!!!
ProfRobBob thank you for the knowledge, but I do wish teacher get paid more.
Thank you Trieu Nguyen!!! Me too:)
NOT a sports car sir tho