I've noticed some of you went through the exact same issue I did. If anyone has trouble with this process messing up your composition before and at the start of your zoom transition, follow these steps: Before you start key framing your camera, duplicate the main top clip one last time, set that to the top, then on the mask for that top clip, instead of selecting "Add", select "None". Also, I'm mask zooming through a party balloon so instead of moving that top clip to the second layer to make the wheel's rim slide away, I leave that clip at the top and just key frame the opacity of that masked clip from 100 to 0 within a couple frames. It works seamlessly. Your Welcome!
Thanks for the vid! my one question is in the first preview clip you showed the vertical how do you get it to bounce like it gets blurry and bounces kind of
If you’re having trouble try key framing the point of interest as well at the beginning of the camera , then when you zoom in and play it back it doesn’t turn the angle of the camera
@@scrim0001when you set up the camera , key frame the point of interest (where you’re zooming into) as well This one kinda hard though to do though sometimes I just make each clip a 3d layer and then key frame the position (x,y,z) the z value zooms it in try that
Brother thankyou for the video but if I have to use this same effect again and again then is there any shortcut or I have to create this effect again again ?
Imma just say if anyone can't seem to process what he's doing because you're not familiar with After Effects. Please stop complaining, you're moving way too fast if you can't comprehend what he's doing. Get familiar with After Effects first before trying to make crazy edits right off the bat. It takes time to learn.
when i do this the composition kinda messes up, so the start of the clip has a blck background. but i can see you put something on that just mirrors the car on the right insted of having a black background, howd you do that? not sure if my question makes sense
I had the same issue despite following every step here precisely. It frustrated me. I figured it out tho. Before you start key framing your camera, duplicate the main top clip one last time, set that to the top, then on the mask for that top clip, instead of selecting "add", select "none". I'm mask zooming through a party balloon so instead of moving that top clip to the second layer to make the wheels rim slide away, I leave the clip at the top and just key frame the opacity of the masked clip. It works seamlessly.
ok but why does my tracker does not work properly instead of making the mask big its making it smaller even i made the setting to position rotation and scale it always happens this tracker is trash
Is there a way to do the reverse like doing the zoom out from a clip that turn it into a traingle without a green instead a shape that we make that the clip takes its shape without having to use mocka istead a mask or without it and that clip when it turn into a traingle that a hand holds like animated hand holding that traingle shape
Y'all are some liars. For someone that is not familiar with after effects this was not helpful at all. He did not show in depth how to mask a layer, he jumped straight into and did not even explain how to get to the option of tracking a mask.
@@jacrispybbqthere are plenty of tutorials you should go throug before learning effects, like basic editing concepts. Masking is not AE-Exclusive and applies to way more basic things
I feel like the 22.1 version is fucking up my masking cause when Im done masking and tracking the objects n play it back it just goes off track even when I fix it back to the right position
Lo que más le agradezco a GTA 5 es que te pone música que nunca te imaginaste conocer, y fue así como llegue aquí, nací en el 98 y tengo 25 y con esto no cabe duda que los 80's fueron los mejores tiempos de la humanidad
This has proven to be one of the most frustrating things I’ve ever done! I need some help man. I get to the camera and zooming in but after/during zooming through the clips 2 things happen. 1 the next clip I zoom through is somehow smaller then the entire frame 2 the clip somehow automatically turns to an angle as if I’m looking at it from the side. 🤬🤬 Any advice would be amazing, thank you.
I had the same issue despite following every step here precisely. It frustrated me. I figured it out tho. Before you start key framing your camera, duplicate the main top clip one last time, set that to the top, then on the mask for that top clip, instead of selecting "add", select "none". I'm mask zooming through a party balloon so instead of moving that top clip to the second layer to make the wheels rim slide away, I leave the clip at the top and just key frame the opacity of the masked clip. It works seamlessly.
hey man youre kinda bad at explaining stuff when i am done with my camera panning and zooming in to the object, my first frame is distorted and looks like ive been messing with the angles when i havent. i have followed your tutoorial precisely but i reckon you could try to be more clear and not so unsure of what youre teaching others.
I've noticed some of you went through the exact same issue I did. If anyone has trouble with this process messing up your composition before and at the start of your zoom transition, follow these steps: Before you start key framing your camera, duplicate the main top clip one last time, set that to the top, then on the mask for that top clip, instead of selecting "Add", select "None". Also, I'm mask zooming through a party balloon so instead of moving that top clip to the second layer to make the wheel's rim slide away, I leave that clip at the top and just key frame the opacity of that masked clip from 100 to 0 within a couple frames. It works seamlessly. Your Welcome!
when i use pen tool it cant track correctly and move avay from place i want to make transtion.how can i fix it
OMG THIS IS SO HELPFUL TO US!! LOVE IT ♥
Super useful and good explanation !! all I will say is that you should say the shortcut you're using for the people who don't know the command
thank you! yeah i gotta get better at that 😂
@@TyloFX that’s just my point of view but I’m sure it can be a plus!
I love your videos thanks... well done bro❤
Brother. Your content is so valuable and simple to follow along. Thank you for sharing these videos.
thanks for beatiful tutorial man
thanks for the support!
Very useful, thanks a lot!!
it took me hours but thank you, it was useful
thanks! glad it helped
Thanks for the vid! my one question is in the first preview clip you showed the vertical how do you get it to bounce like it gets blurry and bounces kind of
I used a plugin called "twitch"
man, very good!!!
If you’re having trouble try key framing the point of interest as well at the beginning of the camera , then when you zoom in and play it back it doesn’t turn the angle of the camera
🙌🙌🔥
how do I do that?
what do you mean? I'm having this issue, but I don't understand what you're saying
@@scrim0001when you set up the camera , key frame the point of interest (where you’re zooming into) as well
This one kinda hard though to do though sometimes I just make each clip a 3d layer and then key frame the position (x,y,z) the z value zooms it in try that
@@_shotbytito ok thank you very much
w tutorial ty man
Keep going bro
Slick AF!
ty
i cant use motion blur which you told about in the end rest i followed everything and it turned out good
Thank bro❤🔥
tnks dude
no problem
Brother thankyou for the video but if I have to use this same effect again and again then is there any shortcut or I have to create this effect again again ?
Hi thanks for the video, please where i can find the footages hat you use in this video ? thank you
Where did you get the clip you used or where to find similar clips?
could you send the plug in title you used? I cannot find the twitch one
thank you
thx
Imma just say if anyone can't seem to process what he's doing because you're not familiar with After Effects. Please stop complaining, you're moving way too fast if you can't comprehend what he's doing. Get familiar with After Effects first before trying to make crazy edits right off the bat. It takes time to learn.
thank you!!!
great but I'm lost at where you duplicated the video. what's the reason for duplicating the video.
fkn COOL
Can I know what that effect you used in the preview is?? The one after the zoom in? Like a pulsing?
the plugin is called "twitch"
Can you do one with the pen tool if not alg
Damn ty
when i do this the composition kinda messes up, so the start of the clip has a blck background. but i can see you put something on that just mirrors the car on the right insted of having a black background, howd you do that? not sure if my question makes sense
I had the same issue despite following every step here precisely. It frustrated me. I figured it out tho. Before you start key framing your camera, duplicate the main top clip one last time, set that to the top, then on the mask for that top clip, instead of selecting "add", select "none". I'm mask zooming through a party balloon so instead of moving that top clip to the second layer to make the wheels rim slide away, I leave the clip at the top and just key frame the opacity of the masked clip. It works seamlessly.
❤️❤️❤️❤️❤️
please can someone let me know of the shake effect you did in 0:05-0:07
🔥🔥🔥
@2:00 i dont have the angle options, just 1 - 4 view. Any idea why or how to get 4 view - top?
hmm thats weird. it may be bec I am on an older version of after effects (2020) and you may have the updated version.
ok but why does my tracker does not work properly instead of making the mask big its making it smaller even i made the setting to position rotation and scale it always happens this tracker is trash
Is there a way to do the reverse like doing the zoom out from a clip that turn it into a traingle without a green instead a shape that we make that the clip takes its shape without having to use mocka istead a mask or without it and that clip when it turn into a traingle that a hand holds like animated hand holding that traingle shape
yeah checkout "moonboy zoom transition"
Y'all are some liars. For someone that is not familiar with after effects this was not helpful at all. He did not show in depth how to mask a layer, he jumped straight into and did not even explain how to get to the option of tracking a mask.
No you are just dumb, I used it for the first time to create this and managed to catch everything
this isn’t a tutorial on how to use after effects. this is a tutorial on how to make the specified effect
@@jadendavisonndoesnt mean someone cant be more in depth
go learn after effects then
@@jacrispybbqthere are plenty of tutorials you should go throug before learning effects, like basic editing concepts. Masking is not AE-Exclusive and applies to way more basic things
❤
I feel like the 22.1 version is fucking up my masking cause when Im done masking and tracking the objects n play it back it just goes off track even when I fix it back to the right position
Do you have the cracked version of ae or did u buy it?
🔥🔥🔥🤑
How would you go about zooming out
Reverse the footage keyframes.
00:05
Lo que más le agradezco a GTA 5 es que te pone música que nunca te imaginaste conocer, y fue así como llegue aquí, nací en el 98 y tengo 25 y con esto no cabe duda que los 80's fueron los mejores tiempos de la humanidad
🤘🏼
🙏🙏🙏
you never explained how to get the mask tool
you need to slow down and explain in more detail, this video has frustrated me a lot because i have no idea what im doing
This has proven to be one of the most frustrating things I’ve ever done!
I need some help man.
I get to the camera and zooming in but after/during zooming through the clips 2 things happen.
1 the next clip I zoom through is somehow smaller then the entire frame
2 the clip somehow automatically turns to an angle as if I’m looking at it from the side.
🤬🤬
Any advice would be amazing, thank you.
I had the same issue despite following every step here precisely. It frustrated me. I figured it out tho. Before you start key framing your camera, duplicate the main top clip one last time, set that to the top, then on the mask for that top clip, instead of selecting "add", select "none". I'm mask zooming through a party balloon so instead of moving that top clip to the second layer to make the wheels rim slide away, I leave the clip at the top and just key frame the opacity of the masked clip. It works seamlessly.
Whats your pc specs ?
Ryzen 5 5600x, RTX 3070 ti, 32gb ram
@@TyloFX TY man ❤🔥❤🔥
What app are you using? Can you respond as soon as you can? I want to make video for my RUclips channel.
I use Adobe After Effects :)
You are going too fast, slow down!
No he is not its just that you are dumb😊
hey man youre kinda bad at explaining stuff
when i am done with my camera panning and zooming in to the object, my first frame is distorted and looks like ive been messing with the angles when i havent. i have followed your tutoorial precisely but i reckon you could try to be more clear and not so unsure of what youre teaching others.
i dont agree with bro, i like you content. but can you please explain why this happen cuz the same thing is happening to me how can i fix it ?
@@ChrisAArchives you wouldve known if he was good at explaining, which he isnt. i learned through another video that was 10x better
@@sabriiseni6399 can u link the vid pls I’m just tryna learn bro :/
@@ChrisAArchives yeah sure man. just dont forget to leave a like on his video.
ruclips.net/video/7hPdLEsxrh8/видео.html
@@sabriiseni6399 bet Thankyou bro !
🔥🔥
🙌🙌