Intro to Wire types Part 1: Mic, Instrument, Speaker, unbalanced
HTML-код
- Опубликовано: 16 сен 2024
- Microphone Wires:
It is used for Microphone connections and balanced line-level gear connections which includes most connections.
If you are referring to it technically it is actually “single pair” or “one pair” shielded.
It consists of two wires in the form of a twisted pair with an overall shield.
It can carry a balanced signal which is best for rejecting noise.
The signal is carried on the pair of wires and the shield is used to help insulate the pair from noise.
Commonly terminated with XLR connectors, TRS 1/4" connectors, and less commonly with Euro connectors, TRS 1/8” connectors, and TA3 Mini XLR connectors.
It can also be used to carry a stereo signal with one wire being the left and the other being the right and the shield being common.
Instrument Wires:
It is used for instruments, instrument interfaces, unbalanced gear connections, and more
It is technically a coaxial cable with a center conductor that is jacketed and then surrounded by a conductive PVC layer and then the shield.
The center conductor carries the signal and the shield is the signal ground.
The conductive PVC layer is designed to reduce noise in high impedance applications like many guitars.
You will commonly find this cable terminated with TS 1/4" connectors and RCA connectors.
Speaker Wires:
They are designed to carry a higher voltage, higher current signal.
Most speaker cables are 2 conductor cables that connect the plus and minus of the speaker to an amp.
It is not uncommon to also find 4, 6, and 8 conductor cables for bi-amp systems and multi-cabinet systems.
Regular speaker cables do not have a shield because the voltages do not warrant a shield.
Speaker cables commonly come in two forms, zip cord or also called figure 8, and overall jacket.
You will commonly find speaker cables with TS 1/4" connectors, banana connectors, Speakon connectors, bare ends, and more.
Unbalanced Wires:
Unbalanced cable and instrument cable has a lot in common. Both are coaxial cables with a center conductor and a shield but the unbalanced cable does not have the extra conductive PVC layer.
Without the conductive PVC layer, it is not recommended for high impedance applications but is still perfect for all other unbalanced applications like gear connections, stereo connections, unbalanced mic connections, and more.
The center conductor carries the signal and the shield is the signal ground.
You will commonly find this cable terminated with TS 1/4" connectors and RCA connectors.
Thank you goodman, the part when you talk about inst cables, PVC conductive jacket is what I had problems, because when it is soldering, it is most important to retire it
You're welcome! I'm glad you found it helpful!
can you connect 6 microphone all 6 in to one plug in and 6 can talk at the same time?
The correct way to do that would be to use a mixer and each mic gets it own channel with it's own volume control. With that you can balance the levels so the loudest talker does not over power the others.
Hi! Its really nice video. Problem is when I went to buy cable for microphone they said tell me in term of X/X like we use in house wiring 7/29 and 3/29, and for main wire 7/64. Can you tell me which type of wire should I purchase? Thanks
Hum, I have to admit I am really not sure what that is referring to. It really is not that complicated, there is the quality of the wire that plays into the cost. Few other things of concern but not for most applications. Buy from a quality seller and you will be good. Here are our cables if you like: eventhorizon-srv.com/ecommerce/os/catalog/xlr-microphone-cables-c-21_22.html
Hi, can you give me the name of small cable at 4:30s? , is that mogami 2330 ? Thank you ^^
Hey, They are both Mogami wires. The wire on top is 2319: eventhorizon-srv.com/ecommerce/os/catalog/wire-information-t-1.html#M2319 bottom wire is 2528 (a dual cable): eventhorizon-srv.com/ecommerce/os/catalog/wire-information-t-1.html#M2528