BOOSTED K20 CIVIC FIRST START!!
HTML-код
- Опубликовано: 2 апр 2021
- WE FINALLY DID IT! The boosted K20 swapped Civic is finally alive... Barely! But alive! I hope you guys are as stoked as we are and I can't wait to get this thing not he dyno and see what we can make happen!
THE COMMITTED CREW:
www.TheCommittedCrew.com
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2 Авто/Мото
Never switched between PH and RUclips so fast Lmao
Bruh me too
Lmfao
Bro💀💀
🤣🤣
lmaooo
I miss seeing Brad and Emerson in the videos :(
i was about to comment that lmao
Same, but it is what is
He should fly them both out to see his new place this summer.
@@brydonbrubacher5335 brad did
너도 비디오
That molygen stuff is so cool, it glows under a black light so you can find leaks.
Watching this while working on my shitbox thinking. "damn I wish I had a lift lol"
Same every time me and my friends work together on the shitboxes we talk about Robby saying he wanted to got back to using Jack stands 😂
Me wishing I had a shitbox to work on... :D
@@simkarte123 dont get an 05 dodge stratus lmao. even the sparkplugs are an hour and a half job
Yeah every day 😂
As for the cast turbo, just use a dish sponge (the rough side) and some wd-40 or oil and be aware that it'll burn off the first time running and will smoke, but that'll seal it up and prevent future issues. Fellow Canadian. Do not clear coat it, will not work and will be a hazzard
I didn’t get bored I was waiting for this
Same!
Same!
Same here bros
Thinking the same thing
Was never bored of the k20 civ. Been waiting for more content!! Good work
It’s always difficult to start your lawn mower after a long winter
NEVER bored with your video’s. I drop everything to see what you’ve posted.
Must've been an awesome feeling seeing that motor come alive, despite having some fuel/ecu issues still. I've been in your shoes before, up until early morning hours trying to diagnose shit. Annoying in the moment but once you figure it all out, it's all worth it. Once she's up and running with a tune, you're gonna love that thing. Boosted Ks are so much fun.
Please make committed crew/stay committed garage banners. PLEASE!!!
Hey Robbie don’t doubt yourself, everyday is THE day if you make it YOUR day
wise words, wise words.
Hey mate, I’m pretty sure you can nock off that ABS ring on the axle shaft and it might clear the grease nipple! They are just rings that hit off 👌
Seeing this build take place makes me exited to finish work monday and get cracking on full suspention and brake rebuild coming easter hollidays
17:40 that face you pull when you're just over it aha
Can’t wait to see this thing at meets this summer
Lets go!!!! Another k20 vid, im loving your content!!!🔥🔥🔥
Make some labels by the battery that says “jump backwards”, you’ll thank me later
I saw the same thing haha
I love the videos with Chris. Obviously I miss the videos with Emerson and Brad but I don't know. Chris is such a chill guy.
I'm so stoked to see this!
tuning by nick is the absolute best!
Waited for this moment!!!!!
Nice man can't wait to see it running 100%
The molygen is awesome because it glows under UV light, get a UV flashlight on Amazon and you can use it to find leaks
POGGERS
Emerson would be proud
Good job bro happy to see you got it going
Would never get bored of this project 🤤
Oh sick, your going to work with Nick!!!
That was awesome!!! I’m
Hoping my ek arrives next week
Going to sound nice when tune gets figured out cant wait !! Good work keep it up 💪💪
Let’s go!! 🔥🔥🔥🔥
Wassup Robbie I bought a windbreaker and hoodie, and I was talking to Chris earlier about first starts lmaoo
Good job man,looking for the next video
I get so happy every time you upload
This brought me so much motivation, trying to find a running driving rsx to swap everything into my ej2.
Through him I'll continue my civic project was going to scrap the car
BEST VIDEO OF ALL 2021‼️
STOP THE CAP! it is pretty good tho
I love how this civic started as a cheap budget build now it's at a full blown sleeper 😂
We are not bored seeing the k20 civic. I was actually waiting for more content of the Kswap!
Grind down the paint under all those ground wires!! sick vid robbie!!!!!!!
love these vids
Ive recently switched to 5w40 LiquiMoly Molygen on my Abarth 500 and its been treating me and the car well! The Turbo Civic should love it, too!
throw an npt to hose nipple and put it in a boost pipe (or the outlet of the intercooler) AFTER the intercooler then plumb that into your wastegate/boostcontroller. The reasoning behind this is that there is generally a pressure difference from before and after the intercooler so you can have a 5 lb psi spring and get a different boost reading into the engine because the wastegate is getting different air than the engine.
Love your videos!!!! Keep up the good work!!
I've been waiting for this😍😍😍🇵🇭
It's very stressful to me and my brother when we work on the engine and it doesn't want to start. You guys look relaxed and had fun. Nice and keep it up.
Such a clean build man 😦😲💯
This just makes me want to figure out where I screwed up on my Geni engine rebuild.. Awesome video as always.
Hell yeah boiii!!!!!
Real Gs already saw it on Instagram 😎
I feel you 😁 getting bored with my project to. 2 steps forward 1 step back. Gotta push trough tho 😁
sooooo closeeee!!
GO GO GO
More civic content lets goooo
Hell yeah 😩
Hi robbie im from the Philippines i hope you notice me bro! I love your videos 👋🏻
YEEEAAAHHHH BOOOOIIIIIII!
im waiting to see a start 😫 i want to see all the progress
HELL YEA BUD🥰🥰🥰🥰🥰🥰😊
I never got bored
The civic never gets boring to watch.
Itsss soooooo closeeeeeeeeeee
Let's goooooo
oh yesssss
Wohoo
when are you gonna upload another 300zx vid
I love your video 😺
Post notification squad
Lets goo
It was kinda good that the fuel wasn't working becuase on a fresh motor you need to crank to get oil lubrication
sweeeet
He tunned my car nick is good man
From a shade tree mechanic, the misfires make it sound like your timing is off. Make sure the distributor is properly oriented and degreed. Also might want to make sure all of your coil plugs are good and firing. I know that on B series if the iacv sensor and the map sensor plugs are hooked up backwards, the car will still run but'll run and sound like booty. Maybe it's the same with K's???
i really like chris but man i miss emerson and brad!
You need to come to florida bro I love the honda
Lets gooooooooooooooooooooooooooooo
💯💯🔥
try some fresh fuel might be something with it sitting for a while in the cold
robbie please tell me that long arse power cable is fused 0.0. if ive learned anything from installing car audio any long live wire neeeeeeds to be fused preferably within 1 ft of the start of the wire.
Haha robbie's civic go brrrrt
Today is the day that is today because it’s today. Haha
Nice
The two dislikes drive Nissan leafs and think they are saving the world
Had the issue with my car, was getting g wayyy too much fuel, I have 1600cc and it was dumping a ton in there. Soaked the cylinders and had to replace the plugs too.
Early squad
I'm sure someone else mentioned this but check ur timing with a timing light. If you hadn't already. If you installed 1k injectors and got a base map tuned to them, you shouldn't need to scale down to get it to start.
Dosent see honda content
*now I'm sad*
Sees honda content
*:3*
Hope you primed the turbo
Did he hook the battery charger up backwards?
Would it make sense to get smaller injectors?
Noice
Does any have a recommendation on what year of Brz/Frs/86 is best?
Damn bro. Should have the wastegate line as close to the throttle body as possible or atleast after the intercooler because of pressure loss because the intercooler. Just means the wastegate will open at a lower boost than your map sensor is reading. No big deal tho
🔥🔥🔥🔥🔥💯💯💯💯💯
Love your content bro... all the way from south africa 🇿🇦 I too have my own channel this side
That hot part of the turbo will stand out after few pulls anyways
Why not drill and tap the turbo with threads?
Make sure you beat in a crevice into the axle nut so they don’t back out
21:20 I work for Microsoft 😆
def ceramic coat any hot parts it helps exponentially with controlling iats
Those tone rings on the axle will come off.
Nice video. But i think It would have looked better with heat shrink on the wires instead of tape