It’s like that meme. Not running LS- upgrade Sort of running LS- upgrade Great running Ls- upgrade (Clears codes) High idle LS- fuck go back. Also. Mash potatoes 🥔
Guarantee you have an air pocket near your coolant temp sensor that is making the ECU think the engine is still cold... Let's get some likes so he sees this!! Usually the port on the head goes from head to head
The first nipple is the crossover tube for the heads, connects both heads in the front under the intake. The nipples out the rad are for the transmission cooler lines
i love youtubers like Robbie that show the hard and not so enjoyable parts of working on cars that you normally wouldn't see and therefore expect. also, mashed potatoes!
Well Robbie I can attribute your videos to my recent purchase of a project. After years of debating and thinking I just don't have the know how, your videos gave me hope and I recently came across a deal that was too good to pass up. Bought myself a 1984 ford ranger because of your s10 build and I can't wait to get wrenching on it, thanks for the encouragement with every video you do!
I think its running in limp mode. It runs lean and doesnt run when you pull and clear all the codes. Then it runs even leaner... So no start. When it warms up it will run. Check Map sensor if it needs one. Temprature sensor check (coolant and intake) and does it have maf normally? It needs that, otherwise It will always be like this. Without sensors it will always run in limp mode and the current tune for that is a lean mixture. Normally it would run on a rich mixture in limp.
Robbie, I think you also need a different coolant overflow that has a cap that will hold pressure since that rad doesn't have a pressure cap. Hope that makes sense
The intake air temp sensor is part of the maf, it wont run right without it,you can convert it to speed density in hp tuners and not have to use the maf. You would need to add a iat sensor
Loved the video and I always love the fact that you show us everything that goes wrong in the process, because when you finally do get it, man it feels so good. Mashed potatoes.
Just to let you know you will need a presser return bottle on coolent . Not a window fluid container. Because wires go to it that goes to computer. Hope this helps a little.
Sorry about the buzz kill but tbh I always thought you should get the correct harness one for looks so there not a bunch of looms everywhere but two when you pull the motor to do the rust correction it will be that much easier to pull and reinstall
When you remove maf the pcm relies on ve tables and require o2 sensors. Without the o2s it’ll somewhat run if you have a maf. O2s are a pretty big deal on these though
Hey Robby the dip stick you put in won’t have the oem length so your fluid level won’t be right autos need to have the proper level to work and shift right to much fluid you’ll blow seals out not enough rough shifting and could burn clutch packs out if low enough.
Any updates on the s10 I follow your channel and currently doing a 5.3 swap in my blue 87 s10 and love the s10 videos. Did you ever get your harness back. I’m ready to see some updates!
It would help if you attach the MAF sensor (Mass Airfrow Sensor) that gos between the factory air cleaner and the throttle body. The way that you have it right now the PCM (Computer) does not know how much fuel to add to the motor. The MAF sensor monitors the amount of air going into the motor. The computer reads this and then tells the injectors how much fuel the motor needs to run at the correct air/fuel ratio. You can also modify the transmission lines so that you can use the factory battery tray location.
Glad youre just biting the bullet and getting the wiring redone for the S10. It was getting pretty haggard tbh. But i think this will help it get together a little nicer before you go ahead and do a full rebuild on it. Mashed potatoes
for you who does your own parts such as brackets etc. I suggest you purchasing a 3D-printer, it is easy and cheap to produce parts. And you can print in plenty of materials. From plastic to metal, carbon fiber and nylon, but that is just some examples. Pretty stiff and reliable materials. If youre interested, comment back and we could keep in touch on mail or DM, if not somewhere else
The computer realy does care about the o2 sensor being cleared. I just did mine on a audi, and it did the same thing. Except I can keep it running until the o2 error comes back up.
You can't really delete the MAF sensor. When the MAF goes bad or is unplugged the ecu automatically goes into speed density and runs on the map sensor. When you cleared the codes if once again started looking a for MAF which isnt there so it wouldn't run.
Mashed potatoes! I love what you’re doing man. If you run speed density off of the iat and map sensor you don’t need a maf, and if you plan on boosting it, it’s better to run speed density anyways.
That’s why I’ll always keep a small block 400 in my s10 no computers or sensors air fuel spark and she purrs well growls but I like the ls engines but I’m old school
Mashed potatoes!!!!!!!!!!!! Please use the stock s10 rad for the 4.3 modify the transmission cooler lines to work with the bigger s10 rad. Modify the rad support. So the rad sits inside the support. Current performance has a wright up on how to do that. S10 forum also has some information on that too. The steam vent needs to to a port on the rad. The S10 power steering hoses will work for the 4.8 LS pump to gear.
It’s like that meme.
Not running LS- upgrade
Sort of running LS- upgrade
Great running Ls- upgrade
(Clears codes)
High idle LS- fuck go back.
Also. Mash potatoes 🥔
😂
I dont know why seeing that gas pedal installed was so funny but that had me crying! 🤣
-Mashed potatoes
Omg I laughed entirely too hard at that!! 🤣🤣🤣
"dude I can't believe this actually worked"
a phrase I've been hearing a lot on this channel lmao
An inch or two shy under there, I feel ya man 😂😂😂
When you clicked so fast that the video is still 360p.... damn
still 44minutes later its still 360p lmao
1 hour and its still 360p
Even now it still is 😐
I have 1080p
@@christopherc1976 I’m confused
It’s dope watching Brad and Robbie back to back... Mash potatoes 😌
The coolant leak on your head runs to the throttle body. You’ve also got an oil line that runs to the throttle body
I hope this is clickbait. But I can't lie, I'm excited to see some carnage🤣
Mashed potatoes
I was thinkin the same thing😭
360p gang
Mashed potato!! That gas pedal made my day 🤣
"For the sake of getting on the road today, I built that", little did he know...😂
Guarantee you have an air pocket near your coolant temp sensor that is making the ECU think the engine is still cold... Let's get some likes so he sees this!! Usually the port on the head goes from head to head
The first nipple is the crossover tube for the heads, connects both heads in the front under the intake. The nipples out the rad are for the transmission cooler lines
On the Throttle body put a filter with air intake hose its going to help a lot starting it up.
i love youtubers like Robbie that show the hard and not so enjoyable parts of working on cars that you normally wouldn't see and therefore expect. also, mashed potatoes!
PLEASE LOOK AT BUILT OFFICIAL HE HAS SUCH A COOL CHANNEL IF YOU LIKE THIS
I just realized when he did the close up... he looks like the grown up version of Dewey from Malcom in the middle 😂 🤣😂😂🤣🤣🤣❤
Well Robbie I can attribute your videos to my recent purchase of a project. After years of debating and thinking I just don't have the know how, your videos gave me hope and I recently came across a deal that was too good to pass up. Bought myself a 1984 ford ranger because of your s10 build and I can't wait to get wrenching on it, thanks for the encouragement with every video you do!
Keep the LS S10 content coming!
Feel bad for you man you tried everything to get that truck started all I can say is men is to don't give up on yourself don't push it over the limits
Yes! The bank 1 sensor 1 and bank 2 sensor 1 O2 sensors need to be plugged in! You will be reading really lean and it won't run right.
I think its running in limp mode.
It runs lean and doesnt run when you pull and clear all the codes. Then it runs even leaner... So no start. When it warms up it will run.
Check Map sensor if it needs one. Temprature sensor check (coolant and intake) and does it have maf normally? It needs that, otherwise It will always be like this.
Without sensors it will always run in limp mode and the current tune for that is a lean mixture. Normally it would run on a rich mixture in limp.
Robbie, I think you also need a different coolant overflow that has a cap that will hold pressure since that rad doesn't have a pressure cap. Hope that makes sense
5:33 lmfao, I can't... Mash Potatoes
Robbie can’t wait for the s10 to finally start running well 🔥
Cant wait to see these projects evolve
mashed potatoes btw
Robbie: What are you doing this is a car channel?
RUclips: You legit had several episodes on 4 wheelers.... so... yeah... (Mashpotatoes)
The intake air temp sensor is part of the maf, it wont run right without it,you can convert it to speed density in hp tuners and not have to use the maf. You would need to add a iat sensor
Loved the video and I always love the fact that you show us everything that goes wrong in the process, because when you finally do get it, man it feels so good. Mashed potatoes.
Back after a while of dealing with my own shit! Glad to see you're well. Mashed potatoes since before the wish video on the BRZ baby!
Robbie it’s alright man I mean you’ve gotten far with the s10 man you’re doing good I recommend in the mean time working on the 300zx
"we have a pretty big news next week" I want to hear a really big news lol
Just to let you know you will need a presser return bottle on coolent . Not a window fluid container. Because wires go to it that goes to computer. Hope this helps a little.
“Two little nippys wantin to hang out” 💀😂
Love your vids. I'm learning a lot about working on cars thx
yo that gas pedal part had me rolling! stoked to see the s10 build continue and hope you work on the genny soon. mashed potatoes
I’m loving these S-10 videos
Mashed potatoes! You made the right call. Cant wait to see the s10 rippin
Sorry about the buzz kill but tbh I always thought you should get the correct harness one for looks so there not a bunch of looms everywhere but two when you pull the motor to do the rust correction it will be that much easier to pull and reinstall
There is no time to wait for HD. 360p is enough
When you remove maf the pcm relies on ve tables and require o2 sensors. Without the o2s it’ll somewhat run if you have a maf. O2s are a pretty big deal on these though
Hey Robby the dip stick you put in won’t have the oem length so your fluid level won’t be right autos need to have the proper level to work and shift right to much fluid you’ll blow seals out not enough rough shifting and could burn clutch packs out if low enough.
Mashed potatoes = hilarious 😂 can’t wait to see this thing rip up the road
u gunna turbo it?
Coming from someone with a W140, how the hell did you even start it without a maf. HOW WHAT MAGIC
Any updates on the s10 I follow your channel and currently doing a 5.3 swap in my blue 87 s10 and love the s10 videos. Did you ever get your harness back. I’m ready to see some updates!
Last time I was this early, jasmin wasn’t even wide bodied
Mash Potatoes. Great vid bro. I always enjoy relaxing at home watching stress yourself out with all these car issues lol.
Hey man, love the content! What year is your BRZ?
It would help if you attach the MAF sensor (Mass Airfrow Sensor) that gos between the factory air cleaner and the throttle body. The way that you have it right now the PCM (Computer) does not know how much fuel to add to the motor. The MAF sensor monitors the amount of air going into the motor. The computer reads this and then tells the injectors how much fuel the motor needs to run at the correct air/fuel ratio. You can also modify the transmission lines so that you can use the factory battery tray location.
Mashed potatoes lol I always stay till the end
That gas pedal has me 😂😂😂
- smashed potatoes
Lmao I died of laughter after seeing that crooked gas pedal
Glad youre just biting the bullet and getting the wiring redone for the S10. It was getting pretty haggard tbh. But i think this will help it get together a little nicer before you go ahead and do a full rebuild on it.
Mashed potatoes
for you who does your own parts such as brackets etc. I suggest you purchasing a 3D-printer, it is easy and cheap to produce parts. And you can print in plenty of materials. From plastic to metal, carbon fiber and nylon, but that is just some examples. Pretty stiff and reliable materials. If youre interested, comment back and we could keep in touch on mail or DM, if not somewhere else
Aww and the build was going as good as mashed potatoes
Every video is soo good.
-Mashed patatoes
“Mashed potatoes” - Robbie
You need that mass air sensor for it to run right
It will be worth the wait! Can’t wait for the results!
Mashed potatoes.
That sounds good lol
You need to run the maf and iat for that thing to run nice in stock form.
mashed potato's. been watching all the videos to the end
The computer realy does care about the o2 sensor being cleared. I just did mine on a audi, and it did the same thing. Except I can keep it running until the o2 error comes back up.
360p?
I died laughing when the horn didn't work lmaoooooooooo
Mash potatoes. You're doing a great job Robby keep it up love your videos. Have a nice day from sweden
Mashed Potatoes, stay committed can't wait to see this truck going proper!
I love this ....this is a car channel now let's fix my truck
mashed potatoes! excited for the s10 to run and drive, have a good day robbie!
Mashed potaters 🔥
Mashed potatoes. This build has me super excited to complete mine. Keep up the good work.
Dam that sucks spent so much time building it and now ripping it apart again...😞 MASH POTATO!!!!
You can't really delete the MAF sensor. When the MAF goes bad or is unplugged the ecu automatically goes into speed density and runs on the map sensor. When you cleared the codes if once again started looking a for MAF which isnt there so it wouldn't run.
Mash potatoes 😂😂😂 your real making me rethink my whole s10 build🤦🏽♂️ instead of 305 going ls 😅😅😅
Can we just call it the LS10 build?
Yay a long vid again
Long videos to procrastinate to, love it
mash potatoes
can`t wait to see it again but in 1080p
I usually fill them when there's no fill cap I fill them from the overflow resivwar
Damn we still stuck on 360p, i need that HD boiii
Early love the vids man
MASHED PERTERTERS
I dead when he showed the finished gas pedal😂
im still watching, my eyes hurt but its worth
Oh my God bro the sideways gas pedal had me rolling
Mashed potatoes! I love what you’re doing man. If you run speed density off of the iat and map sensor you don’t need a maf, and if you plan on boosting it, it’s better to run speed density anyways.
Yo! I hope you've gotten my package can't wait for you to see what I made for you! and Mashed Potatoes you secret keeper!
Definitely one of my favorite RUclips channels. Mashed potatoes ✌️
That’s why I’ll always keep a small block 400 in my s10 no computers or sensors air fuel spark and she purrs well growls but I like the ls engines but I’m old school
the builds a little mashed potatoes right now but its getting there and im happy, Proud of you my guy
Mashed potatoes!!!!!!!!!!!!
Please use the stock s10 rad for the 4.3 modify the transmission cooler lines to work with the bigger s10 rad. Modify the rad support. So the rad sits inside the support. Current performance has a wright up on how to do that. S10 forum also has some information on that too. The steam vent needs to to a port on the rad. The S10 power steering hoses will work for the 4.8 LS pump to gear.
Yo Robbie, you should snap up brads new Audi for ur girl... Courtney would flip out!!!!!!!! 🤔🥰💐
I love the other guys (I feel really bad because I’m blanking on it) Vstar it’s clean
Oh and mashed potato’s
I vote frame resto while you wait on the harness, also mash potatoes and stay committed!
I love the NF hat!!
You dingus 😂😂😂😂
Love the content man
Mashed potatoes is a good source of food
MASH POTATOES 🥔
Don't forget to put the expantion tank to the highest point of the engine since you don't have a filler cap on the rad!
360 isnt the only option now, thankfully, also mashed potatoes
Woo hoo! Mashed potatoes! Don't give up Bro!