your the best wood working ,, i like wood working to much.... i wish i built my shop same your elegant shop...👍👍👍👍👏👏👏👏 by the way i came from philippines... pure pilipino😍😍😍i alway watching your video upload....tank s to share ...
thank you very much for sharing, you saved me of the nightmare of attaching my saw to the base plate with screws and un attaching it every time . good job and thank you .
Perfect. I'd been looking at buying a track saw for my new wood shop, but the price for a decent brand is too much. This build is the best I've seen, easy to remove the saw, simple, can be built with leftover ply. I think I'd use a router to cut the groove though, and possibly a plastic runner.
For that dado, why not use a router? Seems like you have more than a sufficient shop… Either way, dope video, great tunes, and a solid inspiration to do this myself with that saw I’ve had my eye on for a while!
Thanks for sharing. I think I will just use the zero clearance base plate idea you have and for me that alone I think will help with tear out on the top side of a cut. And if only using the base plate you only lose maybe 1/8” depth of cut. I also like your push stick you used on the table saw. Off to see if you posted a video of that now!
Very nice! Combines several feature of other DIY track saws that I've seen and I particularly like that the saw is not attached to the base plate, so it's easily removed for other functions. I think I would eliminate the handle on the track in favour of a hand-hole cut out just to keep the bulk down and ease of storage.
5:20 how you can eyeball it to be square with blade ? you need the blade be exactly 90 degree with slider... how you can just doit by hand ? you need atleast a square to be sure its 90degree... else the blade will be binding when cutting.
Amigo es una buena y gran idea no me lo habia imaginado esta herramienta para cortar partes largas de la madera el detalle que vi fue que hiciste un corte de una sola vez con sierra de dientes gruezos lo que yo imagino que para cortar melanina seria lo ideal seria cortar de ambos lados para que no quede despotillados o mal cortado, buen video.
If you’re making things out of large sheets of plywood, a track saw comes in handy for handling long precise cuts. If you could have a way to have a HUGE table for the table saw, sure, you COULD do that. It’d still be difficult to do sanely. A mitre saw is of no value for a large sheet of plywood.
First of all, I am ashamed to admit I was nodding along a little to the funky background track... But seriously, this is quite the nice build. I already see the version 2 video link up there, but I might give this one a go (although I have a DeWalt and not a Milwaukee, so there's probably some sort of rivalry there or something, hehe ....) *Edit:* I failed to read that correctly. The "Version 2" link above is from a year ago. I think this is your latest.
Awesome job, going to make this, but where did he get that dust adapter for the saw? I have the 7 1/2 I didn't get one with the saw. See some on Amazon, but not sure it will fit.
Dekay- only super glue on the saw tray, or did you brad nail as well? Also, I liked the viewing holes in your earlier design. This one is simpler, but diy seems like you could lose track of your mark.
Well done. Some great innovation. I just made a steel mft table. It's very heavy. I still need to somehow install fence and another on the opposite side so I can make true square cuts. On my mft table despite spending time squaring I still make cuts that were not a true square. The fence on the mft table is not rigid enough so there is movement. The time it takes to set true and square seems to be only successful when cutting ply. When cutting hardwoods the accuracy diminishes somewhat. Making a steel mft table will accomodate the mft table so I can set them side my side to carry full sheets.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
your the best wood working ,, i like wood working to much.... i wish i built my shop same your elegant shop...👍👍👍👍👏👏👏👏 by the way i came from philippines... pure pilipino😍😍😍i alway watching your video upload....tank s to share ...
thank you very much for sharing, you saved me of the nightmare of attaching my saw to the base plate with screws and un attaching it every time . good job and thank you .
The music and pace made this fun to watch. The belt sander at 3:07 was really getting into it.
😂😂
SUPER !!!!!!!!!👍👍👍👍👍
COMPACT AND PRACTICAL.
VERY CLEVER !!!!!
김팀장님 만드는거 보고 타라서 만들었는데..
신세계를 맛봤습니다
정말편하고 좋네요.
늘 응원 할게요^^
좋은 말씀 감사합니다🙇
Perfect. I'd been looking at buying a track saw for my new wood shop, but the price for a decent brand is too much. This build is the best I've seen, easy to remove the saw, simple, can be built with leftover ply. I think I'd use a router to cut the groove though, and possibly a plastic runner.
Subscribed. Much love from the USA 🤙🏽
For that dado, why not use a router? Seems like you have more than a sufficient shop… Either way, dope video, great tunes, and a solid inspiration to do this myself with that saw I’ve had my eye on for a while!
Very nice work. Congratulations.
Thanks for sharing. I think I will just use the zero clearance base plate idea you have and for me that alone I think will help with tear out on the top side of a cut. And if only using the base plate you only lose maybe 1/8” depth of cut. I also like your push stick you used on the table saw. Off to see if you posted a video of that now!
역시 밀워키 만큼이나 세련되고 멋진 작업들 이시네여~항상 감동 받습니다 ㅎㅎㅎ
건강관리 잘 하시구여
좋은 작품들 많이 공유해 주세요 ^^
화이팅👍🥰🌼
감사합니다 쌤~~
cool video but the question is is milwaukee hole hawg better or worse than 10 years ago?
아...멋있다 진짜.... 공구 잘다루고 크래프트 잘하는분 보면 진짜 동경하게 됩니다....
크래프트가 뭐에요?
@@eunjeseong1224 공예,기술같은걸뜻합니다.
great content. promoting while sharing worthwhile projects.
great project. what kind of glue is this? and what is the thickness of this grip-tape?
love your works. And how neat your shop is
I like your ideas. Thank you for sharing!
تمكنا لكم التوفيق والنجاح في اعمالكم الناجحه
Great work how can I get plans to your crosscut sled with the red clamp?
Fantastic . Realy like that Idea for an inexpensive track saw
I really like how clean this guy is 👌😎
Just What I wanted, many thanks.
very good job man
from ALGERIA
Very nice! Combines several feature of other DIY track saws that I've seen and I particularly like that the saw is not attached to the base plate, so it's easily removed for other functions. I think I would eliminate the handle on the track in favour of a hand-hole cut out just to keep the bulk down and ease of storage.
Bắc
*q
Thank you! Nice video!
かっこいいですね
素晴らしいアイディアです
Bravo. Very slick 👍🏼
Nice Job 👍🏻👏
Nice work sir please keep it up
Very good👍👍👍👍
which more accurate? the first track saw you made or this one?
Tidak ada habisnya dalam setiap projek 👍👍 selalu membantu
Mana nak beli tape hitam bawah papan tu ye
@@udenur5694 tak tahu pun saya
Ok tak pe nanti Saya cuba cari
Excellent job :-) Thank you so much for sharing!!!!!
유익한 내용 잘봤습니다
혹여나 초보분들이나 기계 다루시는데 미숙한분들이 보시고 따라 한다는 과정하에 혹시모를 사고를 대비하여 작업중 충전스킬 배터리는 뺀 상태에서 작업하셨다면 좋았을듯 싶네요
잘보고 갑니다 ^^
Thanks for this! What do you call the black lining you put under the guide?
5:20 how you can eyeball it to be square with blade ? you need the blade be exactly 90 degree with slider... how you can just doit by hand ? you need atleast a square to be sure its 90degree... else the blade will be binding when cutting.
Amigo es una buena y gran idea no me lo habia imaginado esta herramienta para cortar partes largas de la madera el detalle que vi fue que hiciste un corte de una sola vez con sierra de dientes gruezos lo que yo imagino que para cortar melanina seria lo ideal seria cortar de ambos lados para que no quede despotillados o mal cortado, buen video.
Very ingenious, as usual.
Very good jobs u do mate.👍
That was a very clever design. Well done
ยอดเยี่ยมครับ ผลงานสุดยอด
밀워키 레드 감성이 참 좋네요
앞으로 다른 밀워키 목공제품도 소개해주세요
네 자주 올릴께요~
Very clever, why don't Milwaukee make a track saw?
Хорошо получилось, и подошву дырявить не понадобилось. 👍
super bonne idée merci de France
Your work is perfect
What kind of black ruler, for angles do you have, from which company?
좋은 아이디어와 좋은솜씨가 부럽습니다
박종대님 감사합니다 ^^
nice lighting, video editing, music and wood working, top class. keep it coming. FC from Thailand.
👍👍👍inspiration
Isn't your blade on backwards?
Where I can buying the Circular saw Milwaukee....?
I live in Indonesia... thank you for your support...
If I have that many professional tools which he had, I will not need this hand made one😃
If you’re making things out of large sheets of plywood, a track saw comes in handy for handling long precise cuts. If you could have a way to have a HUGE table for the table saw, sure, you COULD do that. It’d still be difficult to do sanely. A mitre saw is of no value for a large sheet of plywood.
Cool build..
Complimenti una guida davvero efficiente bravissimo!!!
Which model saw did you use here? Cheers.
Great idea
haces accesorios muy útiles, me gustan mucho tus diseños, una pregunta, veo que utilizas un pegamento trasparente que tipo de pegamento es?
Yo me pregunto lo mismo
Very nice and simple design!
That's what that puck is!! a freakin candle.... genius
Very well done. Question: what kind of glue do you use?
6:59 what is that black ribbon? And what function does it for?
What kind of table saw is that? Also Milwaukee???
Muy buena la guia espectacular!!!!
Saludos desde Argentina!!!
Good idea !
섬세하게 신경 많이 쓰셨넹...
바닥처리는 따~~봉ㅇㅇㅇㅇ.....
가끔 레일 열상 나오는거 보믄 ... 미끄러 지지않을까낭 했는디....
손잡이두 ... 짱짱~~~
좋은 영상 쌩~~유~~~
감사합니다 ~~~
First of all, I am ashamed to admit I was nodding along a little to the funky background track...
But seriously, this is quite the nice build. I already see the version 2 video link up there, but I might give this one a go (although I have a DeWalt and not a Milwaukee, so there's probably some sort of rivalry there or something, hehe ....)
*Edit:* I failed to read that correctly. The "Version 2" link above is from a year ago. I think this is your latest.
Awesome 👍
That is a really nice piece of kit.
Well done. Thank you.
Great idea , good job
ok, i'll make this one...good job, very usefull 👍👍👍
이런영상 보면서 답답한게 플런지쏘가 가격이 원형톱가격이면 이런일 안해도 되잖아요. 원형톱보다 플런지소가 더 안전하고 이런저런 용도에도 맞는데 구지 비싸게 내놓아서 다들 이런거 만들게 하는지... 답답할 따름... 영상 잘봤어요. 작업하시는게 모두 예술입니다. ^^;
How is this track saw design performing in 2021. Any improvements you made on it?
나중에 만들어 볼까 생각중 입니다 솜씨 좋아요^^👍🏻
wow, very interesting
Awesome job, going to make this, but where did he get that dust adapter for the saw? I have the 7 1/2 I didn't get one with the saw. See some on Amazon, but not sure it will fit.
밀워키 참 가성비 좋은 제품
참 좋죠 =)
i wanted to make one like this. kinda hard always clamping those boards and slabs as guide.
Excellent thanks for sharing.
Dekay- only super glue on the saw tray, or did you brad nail as well?
Also, I liked the viewing holes in your earlier design. This one is simpler, but diy seems like you could lose track of your mark.
Good men good aadiya
Where do we want to get this kit if I have this kit I don't do the binding
Salut très bonne vidéo merci
Average White Band? Nice project!!
Dude that is awesome!!! Making my own right now! Thanks!!
Nice Job! love the music too....
Finally Milwaukee circular saw
Good job..
Brilliant idea, I think it’s great and would make a great addition to my shop!
Good job
멋진 모습 잘 보고있습니다. 관심이 많고 정말 해보고 싶어요. 가까운 곳이라면 배우고 싶네요 항상 안전하세요 하세요 화이팅입니다
응원 감사합니다 ^^
What type of wood you use?
Well done. Some great innovation. I just made a steel mft table. It's very heavy. I still need to somehow install fence and another on the opposite side so I can make true square cuts. On my mft table despite spending time squaring I still make cuts that were not a true square. The fence on the mft table is not rigid enough so there is movement. The time it takes to set true and square seems to be only successful when cutting ply. When cutting hardwoods the accuracy diminishes somewhat. Making a steel mft table will accomodate the mft table so I can set them side my side to carry full sheets.
Love it!
Awesome. Thanks
와우 점점더 채널이 발전하는거 같아서 보기 좋습니다!!!!!^^더욱 더 번창하세요~~
라이트님 고맙습니다~
Чан Чун чин
would have been alot cooler if you had made the entire thing with the circular saw and nothing else.
Quelle est ce genre de colle que vous mettez pour coller ???
Merci et bonne continuation 🤙👍⚒
Great video! Definitely going to make one. One of the easier designs to make!