Dude modified a standard circ saw with a gas strut to make it plunge. Look around at his shop, diy bench dog clamps, diy table saw, diy plunge base for router, the list goes on and on. I tip my hat to you sir, i simply dont have the time to scratch build everything. You won yourself a subscriber. Next video will probably be a homebuilt battery drill ........
This is certainly one of the better DIY actual track systems I've seen on YT. The lock-unlock is great and the use of taped threads in wood saves time & money on threaded inserts
This is brilliant. By exposing the miter track on top of the guide instead of installing it, no compromise of cutting depth is made. While other methods require 3/4“ thick board, this one used 1/2 inch, and could have gone with something thinner if it were not for the bottom t track. Also it cracked me when this guy made sounds like ”좋아!”
This is one of the best videos of making a homemade track saw by far and a router what a fantastic job you did I'm totally in all of your workmanship but it's giving me a great idea I'm going to try this one myself it looks like it's going to be far more hard lasting and more accurate thank you great job look forward to seeing more of your stuff
That's a good idea, thanks. I always just use a straight edge but I've been trying to convince myself that I need a track saw just because I want it but this will definitely suffice
Loved the router rail add on. We always built our own track saw. But I hung a lot of doors in Palm Beach the main use was cutting off the doors, had to be right. Got to say I did like your layout better.
I paid very little for stuff like this readymade like in Germany or somewhere. I believe the sheet of high quality plywood alone is more expensive, was cool to watch though but kind of strange. Anyway thanks for sharing
Shortening screws, I usually run a bunch of screws through a block of wood with their ends sticking out and use a disk or saw to cut them all at the same length. But this does require me dressing the ends after the cut
Your excellent Tools, Workmanship, Skills are respectfuly appreciated. Your uploads gives an easy to follow the concept. Many will follow your jig designs. BUT for those not so skilled(myself included) wish you gave Dimensional plans. Be Blessed. Love from India
the top and the bottom t tracks are of different widths.. why? Just did a search, but I'm not finding that t tracks don't typically come in different widths. What am I missing here?
The wide T-track at the top serves as a guide for the circular saw, so the wider is better and stronger. The narrow t-track at the bottom is for use with hole-down clamps. Since it is thin, it can be inserted into plywood. The 12mm plywood I used cannot embed wide tracks. Wide tracks are thicker.
@@carpentak Thank you! I was hoping for some specs on the two different widths, so I could try to find where to source them. All of my searches keep coming up with only one t-track width :) By the way, the padauk and purpleheart are beautiful - nice project!
from what I can gather, the blue track is what is called "t-track" (and it is actually the universal kind of t-track that accepts various t bolts and hex heads) the silver is actually called "miter track" and is wider. Apologies in advance to anyone reading this if I have it wrong!
Very cool ideas. I'll definitely be stealing some of them. I think if you rub some paraffin wax inside the guide and along the guide rails, the saw will slide more smoothly.
Why not use the wide saw blades to start and finish the groove cut? 2 cuts instead of 2 cuts with standard saw, then change to the wide saw and do 2 more cuts?
That's because my wide saw blade vibrates too much and doesn't create a straight, clean finish line. I worked like that because I wanted to create a precise groove.
@@carpentak ahh... thanks for the video it's very informative and I hope someday I can make mine too hahaha... but I am not master woodworking... trying hard and think a lot to make one for my personal use at home for emergency purposes. thanks for the reply and good bless.
@@yoyoyevardo5110 If you pay attention to safety and learn step-by-step, you will be able to make wonderful works for yourself someday. I wish you good health and happiness.
Matias Lucena 03 de Setembro de 2022 já ativando o sino aqui do Brasil e como inscrito neste ótimo canal ,já assisti este vídeos várias vezes, o que é bom bom deve ser visto novamente, parabéns mais uma vez, DEUS abençoe toda família.
Bonjour, et merci pour le partage très intéressant. Simple curiosité pourquoi le bois est rouge? A t’il servi pour faire du vin rouge? Continue comme cela je ne regrette pas mon abonnement, car tu est très ingénieux. Jean
C'est un arbre appelé Purple Heart. Une fois fini avec de l'huile, la couleur du vin rouge ressort, et c'est joli, c'est donc mon bois préféré. Merci pour votre abonnement et votre intérêt.
![circular saw guide track jig for precise cutting [woodworking]](/img/1.gif)
Dude modified a standard circ saw with a gas strut to make it plunge. Look around at his shop, diy bench dog clamps, diy table saw, diy plunge base for router, the list goes on and on. I tip my hat to you sir, i simply dont have the time to scratch build everything. You won yourself a subscriber. Next video will probably be a homebuilt battery drill ........
I just watched this again and wish I could give it a second Thumbs Up.
Sir I am astonished when watching you innovate and invent simultaneously! Thank you for sharing!
This is certainly one of the better DIY actual track systems I've seen on YT. The lock-unlock is great and the use of taped threads in wood saves time & money on threaded inserts
You say nothing. You are the easiest to understand! Got my sub on first video. Thank you.
This is brilliant. By exposing the miter track on top of the guide instead of installing it, no compromise of cutting depth is made. While other methods require 3/4“ thick board, this one used 1/2 inch, and could have gone with something thinner if it were not for the bottom t track.
Also it cracked me when this guy made sounds like ”좋아!”
Thank you for your nice comments. You got the point exactly what I was thinking.
OK, Yall are too smart and talented for me.... I can barely draw a line with a ruler.
멋지네요~~영상 잘 봤습니다 또 오겠습니다!!
Wow if I had all that machinery I wouldn't need a track saw
For someone who can’t speak English you have an amazing way to communicate to us the subscribers. And your ideas and skills are amazing thanks 🙏
So much creative idea and design. Thank you so much. Got some ideas from you to make my own track for my circular saw.
This is one of the best videos of making a homemade track saw by far and a router what a fantastic job you did I'm totally in all of your workmanship but it's giving me a great idea I'm going to try this one myself it looks like it's going to be far more hard lasting and more accurate thank you great job look forward to seeing more of your stuff
Punctuation is free..
this is exellent woodworkin job. congratulation!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
좋아 😀 It is a D.I.Y. work of art. 짱
Very good system. Thanks for sharing!
best track saw track EVER!!! and I will buy a track saw and track then...
That's a good idea, thanks. I always just use a straight edge but I've been trying to convince myself that I need a track saw just because I want it but this will definitely suffice
Absolute bliss... all those DeWalt tools... ❤❤❤
You Sir ALWAYS have fantastic ideas and I am grateful you take the time to share them!
That is good
Use rell for glasess
new subscriber here.great work of art.👏👏👏.
Excellent build.
GENIUS, what else can you say? Every one of his designs are inspiring. I wish I had time to build them all.
Loved the router rail add on. We always built our own track saw. But I hung a lot of doors in Palm Beach the main use was cutting off the doors, had to be right.
Got to say I did like your layout better.
Very nice video, thanks
so many wonderful handmade devices/!!!!!
Profesional skill and equip"s
I paid very little for stuff like this readymade like in Germany or somewhere. I believe the sheet of high quality plywood alone is more expensive, was cool to watch though but kind of strange. Anyway thanks for sharing
Having a cut more than 90% of the way through the plywood hoe long will it be until it snaps off or loosens
If only I had a table saw setup.
This man should work at NASA.
man i wish i have the table to make those track groove..
สุดมากไอเดียบรรเจิด
WOW! Very well thought out. Looks a bit labor-intensive/time-consuming, but looks like it was well worth the efforts. Thank you for sharing! Aloha
Part of your excellent results must come from the ‘love pat’ that the components receive throughout the process.
I love this saw guide. Is there a way you could do a parts list? If you could, please also include a link to where to get the rails.
A link to point you to is in the description. Others have no links. There are plenty if you search for 30mm t-tracks.
Thank you.
Shortening screws, I usually run a bunch of screws through a block of wood with their ends sticking out and use a disk or saw to cut them all at the same length. But this does require me dressing the ends after the cut
Очень понравилась универсальность шины. Техника изготовления на высоком уровне! Удачи!
Amazing
Bonjour Monsieur, j'espère que vous déposez des brevets pour vos superbes créations . Vous seriez un excellent voisin........
Bravos a vous.
perfect and percien
A lot of great ideas. Thank you
Your excellent Tools, Workmanship, Skills are respectfuly appreciated.
Your uploads gives an easy to follow the concept.
Many will follow your jig designs.
BUT for those not so skilled(myself included) wish you gave Dimensional plans.
Be Blessed.
Love from India
Thank you for your valuable comments. I can't give plans to my designs right now, but I will work harder and do it someday.
@@carpentak
.....that day and onwards it will be a great generous gesture.....Hope I will be able to enjoy them.
All the best wishes. Keep going......
👍최고인듯....
보자마자 구독 누르고 갑니다.
다른 영상도 봤는데 진짜 대단한 분이네요.
저는 집에서 취미로 목공하는 사람인데 앞으로 자주 오겠습니다.
감사합니다. ^^
감사합니다.~ 제 채널에 자주 와주세요. 앞으로도 보여드릴게 많습니다. 그럼 많은 성원 부탁드리고 행복한 취목생활 하세요.
I hope your real job is building space rockets. Master craftsman.
Muchísimas gracias maestro 😘
Wish you 50 K subscribers very soon.
Thank you!!
공구 몇개를 사야 하는 건가요? ㅠ.ㅠ
그냥 안 좋아도 시중에 파는 거 사서 쓸게요 ㅠ.ㅠ
너무 어려워요 ㅠ.ㅠ
Great Job 👍
정말 깔끔하고 사용에 최적으로 만드시네요. 구독 좋아요 누르고 갑니다.
감사합니다. 좋은 영상으로 또 뵙겠습니다. ^^
Super 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Wow.. Amazing.. You have a new subscriber
Brilliant!
Vraiment beau travail merci beaucoup pour la vidéo
impressive
음.. 좀 다른 게 아니구, 많이 다르네요... 따라하기엔 넘 어렵다는 단점이.. ㅎㅎ 훌륭합니다....
Very good! ❤
amazing thanx
Я бы поставил лайк, если бы он под крутилки "открыть- закрыть" подложил пластиковые шайбы. Но я не такой, я всё равно ставлю лайк👍
영상 잘보고 있습니다~
원형톱 가이드로는 최고네요
7492옆에 있는건 원형톱에 다도날을 장착하신 건가요?
네 감사합니다. 옆에 원형톱에 달린건 8mm 두께의 톱날입니다. 정교톱에서 구입했습니다. 더 두꺼운 날도 있지만 일반 원형톱에는 8mm까지만 물릴 수 있습니다.
muito top show de mais muito
🇧🇷 Bom dia! Belíssimo trabalho. Abraços.
the top and the bottom t tracks are of different widths.. why? Just did a search, but I'm not finding that t tracks don't typically come in different widths. What am I missing here?
The wide T-track at the top serves as a guide for the circular saw, so the wider is better and stronger. The narrow t-track at the bottom is for use with hole-down clamps. Since it is thin, it can be inserted into plywood. The 12mm plywood I used cannot embed wide tracks. Wide tracks are thicker.
@@carpentak Thank you! I was hoping for some specs on the two different widths, so I could try to find where to source them. All of my searches keep coming up with only one t-track width :) By the way, the padauk and purpleheart are beautiful - nice project!
from what I can gather, the blue track is what is called "t-track" (and it is actually the universal kind of t-track that accepts various t bolts and hex heads) the silver is actually called "miter track" and is wider. Apologies in advance to anyone reading this if I have it wrong!
Nice job as you did before! 😃 Thumbs up.
thank you my friend!
Very cool ideas. I'll definitely be stealing some of them. I think if you rub some paraffin wax inside the guide and along the guide rails, the saw will slide more smoothly.
That's a good tip. thank you
Why not use the wide saw blades to start and finish the groove cut? 2 cuts instead of 2 cuts with standard saw, then change to the wide saw and do 2 more cuts?
That's because my wide saw blade vibrates too much and doesn't create a straight, clean finish line. I worked like that because I wanted to create a precise groove.
How did you do the fence for table saw? I am interested
I have that video on my channel
@@carpentak thank you 😊
Hi Sir, how can make order for Guide Rail for Circular Saw only
hello. I don't sell. I only make one of mine.
@@carpentak ahh... thanks for the video it's very informative and I hope someday I can make mine too hahaha... but I am not master woodworking... trying hard and think a lot to make one for my personal use at home for emergency purposes. thanks for the reply and good bless.
@@yoyoyevardo5110 If you pay attention to safety and learn step-by-step, you will be able to make wonderful works for yourself someday. I wish you good health and happiness.
Muito bom👏👏👏👏💯👍✌️
멋진 조기대예요^^ 혹시 조기대 두개 연결시키는 연결브라켓은 이름이 어떻게 되나요???
감사합니다. 알루미늄스틱은 제가 만든거구요. 황동핀 말씀하신거면 그건 우드빈에서 팝니다. 이름은 기억이 안나네요
아쉽게 지금은 판매를 안하나봐요. ㅠㅠ 답변감사드립니다. 그런데 알리에서 찾았네요^^
@@junescraft 혹시 알리에서 찾으신 링크나 이름 알려주실수 있나요?
Keren luar biasa👍
No tak, ale żeby zrobić taką prowadnicę trzeba mieć piłę stołową. Jakbym miał piłę stołową nie musiałbym miec takiej prowadnicy :)
예술이네요
Matias Lucena 03 de Setembro de 2022 já ativando o sino aqui do Brasil e como inscrito neste ótimo canal ,já assisti este vídeos várias vezes, o que é bom bom deve ser visto novamente, parabéns mais uma vez, DEUS abençoe toda família.
좋아 ㅎㅎ
Quá tuyệt vời
Bonjour, et merci pour le partage très intéressant. Simple curiosité pourquoi le bois est rouge? A t’il servi pour faire du vin rouge? Continue comme cela je ne regrette pas mon abonnement, car tu est très ingénieux.
Jean
C'est un arbre appelé Purple Heart. Une fois fini avec de l'huile, la couleur du vin rouge ressort, et c'est joli, c'est donc mon bois préféré. Merci pour votre abonnement et votre intérêt.
Good job
Nice Video!!!
OK!!!😂😂
Did you work on the James Webb Space Telescope by any chance? This is the work of a true master.
구독 알람 설정 합니다 아이디어가 아주 훌륭하십니다.
네 감사드립니다.!!
Why I quit technical woodworking and stick to simpler things. I DON'T HAVE SPARE TIME and I'm way beyond that as production.
woow amazing
안녕하세요 구독 좋아요 누릅니다.
저도 도전하려고합니다 알루미늄 가공물은 구매하신건가요? 아님 금속 가공집에 발주하신건가요??
부속을 구매할 곳을 좀 알 수 있을까요?
한번 찾아뵙고 싶습니다
감사합니다. 네이버에 t트랙 이라고 검색하면 많이 나옵니다. 영상의 은색이 30mm 폭이고 파란색은 19mm t트랙입니다.
제 작업실는 오픈된 공방이 아니고 그냥 집에 있는 개인공간 입니다. 죄송하지만 방문은 좀 어렵겠습니다;;
Excelente 💯👍🏻👍🏻👍🏻
Fabulous job!
Ecxelente.
Mon dieu! I've not seen a table saw like that before...
besi aluminium dapat di beli di mana
👏👌👍🔥
Qual cidade e país voce é ;
I am Korean and this is Daejeon City in Korea.
Excelente , parabéns! 🇧🇷
자재들은어디서구입하나요?
저는 주로 네이버에서 검색해서 구입합니다. 알리에서 직구 하는 것도 있고요.
@@carpentak 고맙습니다
超級高手
Do you do free plans for this please thanks
🔥👍🤝✌️
Круто!
I wish I could find a tutorial for a mini saw cutting guide 😞
Thx for sharing but no, because sliding wood on aluminum is not smooth enough imho
I apply wax. Then it's slippery enough. thanks
My wife use wax too …