In this video I review a tool from China. Below are links to tools that you can buy: ENJOYWOOD Bench Top Router Table- www.banggood.com/custlink/3vD954sh8c?title=1 Clamps-www.banggood.com/custlink/KKm8t0QYiF?title=2 Upgraded Precision Woodworking Multi-Angle Drill Guide -www.banggood.com/custlink/KvGIFgbyIZ?title=3 Concealed Hinge Jig with Quick Clip - www.banggood.com/custlink/mK3i50QdZo?title=4 Marking ruler-www.banggood.com/custlink/GvK9tebrE8?title=5 Ruler stand-www.banggood.com/custlink/K3K8P0QyO9?title=6 Glue scraper - www.banggood.com/custlink/GK3iPeNEjN?title=7 Banggood Woodworking Tool Festival www.banggood.com/custlink/GGDHkQpnrd TikTok www.tiktok.com/@avswood_official?_t=ZN-8sqepLWe5fq&_r=1
That is a brilliant idea for attaching routers. Most plates fit one or two different models only. This is great. One thing missing is the vacuum underneath. That would help a lot. Other than that, this is a great piece of equipment.
Thank you for your feedback! I completely agree; the manufacturers did a great job. I also REALLY like the clamps - sturdy and hold firmly, almost no different from Bessey!
Sure is pretty, is it actually needed. Built custom home for 45 years, including cabinets, fancy closets, plus everything built in custom homes. Had a place for a router on my table saw. You can spend a ton of money buying pretty tools. But you're better off just getting what you need when you need it. Actually, it's more about the time it takes. A shaper was a lot faster when creating custom trim. It also saved a ton of time using saw mills that did that work . These are fun to play with but not intended for production work. Now, would i own this. Yes if i had the room and extra money i would love to buy all the tools out there to play with them . May just be great for some small applications.
Thank you for your feedback! It’s always great to hear from a professional with such extensive experience. For mass production, large and powerful machines are indeed faster and more efficient for the job. However, I aim to showcase tools that are practical for those working in their workshops, garages, or on-site installations. These tools are high-quality and versatile solutions for a variety of projects. Their fair price reflects their quality, and those who value craftsmanship and take pride in creating great products will likely find these tools both accessible and useful.
Not sure what the package is worth, but a router lift without micro adjustment is useless for anything that requires fine adjustment like lock miter bits.
Love the door hinge jig, the ruler is really nice and the small router table is super neat. The drill jig is interesting I have a smaller vintage Sears Craftsman type jig but it doesn't have the adjustability of the one you showcase
DO you realize that USA Mitre slots are smaller than metric... I have 4 mitre slots and bought a Banggood sled for routing (not inexpensive) the mitre bar will not go in any of my slots. Jet Table saw, Shopsmith tool, Shopsmith router table, or Enlon Shaper. The metric bar is a little too wide. Hope you can fix this some day... I would order a nice mitre gauge for the table saws but I know the bar wont fit in any of the slots. Please fix it.
Thank you for your feedback! It’s important to carefully check the product description before purchasing, as many tools offer different variants for metric and imperial (USA standard) slots. Some manufacturers provide multiple size options to fit various miter slots. If this isn’t the case for the product you purchased, it might be worth reaching out to the seller or manufacturer for clarification or alternative solutions. Let me know if I can help further!
Almost perfect. All that's missing is a sliding top so that the material doesn't slide across the top by rubbing it. Half of the top with a thin extension to and abowe the cutting tool with the material attached. This sliding top would have a T-rail attached to the bottom and a sliding strip with rollers as a lower guide so that the spoil doesn't collect in the T-rail groove. (The guides should be reversed, the T-track should be at the top to slide over the slider with rollers)
Não sei de onde vc tá filmando este vídeo mas estas ferramentas são muito top de mas parabéns por mostrar sou apaixonado por ferramentas ,e acho que vc também e
Here’s the translation: I agree, vibrations can affect the tightness of bolts and screws. It’s a good idea to use thread lockers to prevent them from loosening.
@ if you look at the bottom crossbars front and back, the way you have attached them they have a larger lip on the bottom inside. That way a lot of dust will collect there because it forms a shelf that will hold a lot of sawdust. If you flip them so that the wider part is on the top facing inward, then there is no longer a place where dust can collect and pile up on the inside, and the smooth surface on the top of the crossbar gives the table a more finished and sturdier look.
Although this table is small, you can mount a fairly powerful router on it. I think you can go for a power of about 1000 watts. I would choose either a Makita or DeWalt.
@@robertj1701 Some free people still live in medieval age and measure their length in feet, weight in stones and power in horses. For the rest of the world there is metric system :) Also, writing month/day/year for a date is wrong and illogical :))
Check if delivery is available to your country. If not, you can consider reaching out to someone who specializes in international shipping to arrange delivery to your location.
@avswood I believe you, looks good, but for my country it's around €250 + tax and for 300 you can buy here with guarantee, for 350 a standalone table router with the router itself.
@avswood I believe you, looks good, but for my country it's around €250 + tax and for 300 you can buy here with guarantee, for 350 a standalone table router with the router itself.
I understand your situation. You need to look at both options and weigh the pros and cons. Perhaps you don’t necessarily need such high-quality execution, and you could easily go for a more budget-friendly option. If specific features or warranties are important to you, it’s worth considering all the details. However, if maximum quality isn’t required, it might be worth looking into more affordable alternatives.
Tried to buy some of the tools but the their web sight does not complete the order. Starting to think this was a scam. Too bad too I liked some of the tools.
I understand your concern, but I want to assure you that this is a trusted and very well-known website with a good reputation. Sometimes, technical issues can arise that prevent the order from being completed. Please contact their customer support - they will help you resolve the issue and complete your purchase. I hope this helps, and you’ll be able to order the tools you like!
They have nice things, but… When you get something broken, they won’t pay your money back. Try to offer you points of half of the price, like it’s some kind of negotiation platform. It’s a nightmare dealing with them.
Thank you for your feedback. I’m sorry to hear that you had difficulties. Personally, I haven’t had any defective items, though some products were not of the highest quality - but given their low price compared to competitors, it was expected. I recommend reaching out to customer support with your order details; hopefully, they can help in your case.
Well Well Well you just had to show us this just when I was finally going to try and make a router table you had to share this I am going to wait until 7 or 9 months from now till we can save up for that and your drill machine and the last one the ruler I'm just on set income raising our 3yr autism grandson and 12 years old granddaughter will be worth the wait thank you for sharing your experience and new tools for your business this is what I will be able to do thank you Bill deaf man can woodworker from Kansas
Here’s the translation: Thank you for your comment, Bill! I understand how important it is to approach purchases thoughtfully, especially when there are such important priorities. It’s great that you keep working on your projects despite this. I’m sure that when you save up for the right tools, your work will be even more impressive. Thank you for your support and patience - good luck to you!
... only before #7:30 show chipping devices - and then suddenly freehand over long pages. VERY dangerous! RUclips isn't everything - technical training is important for such work (not just "nice")... THX anyway for showing the tools
все это красиво удобно но очень дорого да и обычному пользователю никогда не окупится женщины покупают сумочки в бутиках а мы покупаем вот такие красивые приспособления чтобы удивить самого себя хотя это и не выгодно
They look good but at that price they should be. In my opinion they are too expensive and if you have a problem with them there is no warranty, then you throw them of the window
At first glance, it seems expensive, but if you think about how long they will last and how good they look, it’s worth it. Sometimes it’s better to buy a quality item once than to keep replacing cheap options every year.
I still need to try it out, but I can already say that I’m pleasantly surprised by the quality of this router tabletop. It will definitely handle heavier routers!
In this video I review a tool from China.
Below are links to tools that you can buy:
ENJOYWOOD Bench Top Router Table- www.banggood.com/custlink/3vD954sh8c?title=1
Clamps-www.banggood.com/custlink/KKm8t0QYiF?title=2
Upgraded Precision Woodworking Multi-Angle Drill Guide -www.banggood.com/custlink/KvGIFgbyIZ?title=3
Concealed Hinge Jig with Quick Clip - www.banggood.com/custlink/mK3i50QdZo?title=4
Marking ruler-www.banggood.com/custlink/GvK9tebrE8?title=5
Ruler stand-www.banggood.com/custlink/K3K8P0QyO9?title=6
Glue scraper - www.banggood.com/custlink/GK3iPeNEjN?title=7
Banggood Woodworking Tool Festival www.banggood.com/custlink/GGDHkQpnrd
TikTok www.tiktok.com/@avswood_official?_t=ZN-8sqepLWe5fq&_r=1
💪💪💪💪💪💪💪💪👍👍❤️💞🎉
Cool and i appreciate that they're is no stupid overbearing music playing over this.
Thanks 😊
That is a brilliant idea for attaching routers. Most plates fit one or two different models only. This is great. One thing missing is the vacuum underneath. That would help a lot. Other than that, this is a great piece of equipment.
Thank you for your feedback. I agree that a vacuum connection would be a valuable addition.
Makes me wonder who they stole that design from...BC I'd bet they did! Every other component is clearly a knock off.
This is great,no talking no ad BS in video,i like it.
Thanks for watching!
The whole thing is an ad.
@@jasonsmall5602Yeah,but well suited and without hipe -"buy or die"
The makers of these products have done a goid job and are well priced compared to others. I LOVE the clamps! Strong and hold perfectly.
Thank you for your feedback! I completely agree; the manufacturers did a great job. I also REALLY like the clamps - sturdy and hold firmly, almost no different from Bessey!
Nice to see they are adding woodworking products to their mix of goods...
Agreed! It’s always great when new products for woodworking and hobbies become available.
Excellent review, had I not already built one I would have definitely considered buying this
Thanks 😊
Without a mechanism to finely adjust the height of the router cutter from the top, this setup becomes a lot less usable.
Sure is pretty, is it actually needed. Built custom home for 45 years, including cabinets, fancy closets, plus everything built in custom homes. Had a place for a router on my table saw. You can spend a ton of money buying pretty tools. But you're better off just getting what you need when you need it. Actually, it's more about the time it takes. A shaper was a lot faster when creating custom trim. It also saved a ton of time using saw mills that did that work . These are fun to play with but not intended for production work. Now, would i own this. Yes if i had the room and extra money i would love to buy all the tools out there to play with them . May just be great for some small applications.
Thank you for your feedback! It’s always great to hear from a professional with such extensive experience. For mass production, large and powerful machines are indeed faster and more efficient for the job.
However, I aim to showcase tools that are practical for those working in their workshops, garages, or on-site installations. These tools are high-quality and versatile solutions for a variety of projects.
Their fair price reflects their quality, and those who value craftsmanship and take pride in creating great products will likely find these tools both accessible and useful.
How much
Does it cost to
Oh great - another product I need even though I am not on anything at the moment.
Just keeps getting cooler.
Would by nice to know some examples which routers guaranteed fit the router table. Or recommended ones.
www.banggood.com/custlink/vmK8V1TmVu?title=00
You can see the sizes here
yes, otherwise ...
MAKITA RT0702C
@avswood this is a fantastic video and please continue making them with no voice! Actions speak much louder than words.
Thanks 😊
I love the router bench.
Not sure what the package is worth, but a router lift without micro adjustment is useless for anything that requires fine adjustment like lock miter bits.
Very nice to hear such feedback! I’m glad that the lack of voiceover helps you focus more on the process. Thank you for your support!
Cool product! Liked and subscribed.
From Chicago
Thanks 😊
Love the door hinge jig, the ruler is really nice and the small router table is super neat. The drill jig is interesting I have a smaller vintage Sears Craftsman type jig but it doesn't have the adjustability of the one you showcase
I agree with you, I liked these tools too!
Perfect ..
DO you realize that USA Mitre slots are smaller than metric... I have 4 mitre slots and bought a Banggood sled for routing (not inexpensive) the mitre bar will not go in any of my slots. Jet Table saw, Shopsmith tool, Shopsmith router table, or Enlon Shaper. The metric bar is a little too wide. Hope you can fix this some day... I would order a nice mitre gauge for the table saws but I know the bar wont fit in any of the slots. Please fix it.
Thank you for your feedback! It’s important to carefully check the product description before purchasing, as many tools offer different variants for metric and imperial (USA standard) slots. Some manufacturers provide multiple size options to fit various miter slots. If this isn’t the case for the product you purchased, it might be worth reaching out to the seller or manufacturer for clarification or alternative solutions. Let me know if I can help further!
You did a fantastic presentation of all of these tools. Very well done and thought out. I need one of each. No I am not kidding you.. Thanks Much!
Thank you for the kind words! It’s nice to know the video helped with your choice. Good luck with your projects!
to bad they dont make an adult size router table that ones nice but to small
Looks cool. The router mounting doesn’t look too secure, the vibration could easy loosen it over time and cause the bit to walk
I haven’t noticed this drawback yet. In any case, if needed, you can always use a drop of thread locker.
Very well filmed, and very detailed.
Thanks 😊
Interesting, but the title should read "These tools should be in every workshop".
I agree with you🙂
Thanks for sharing !!
Greetings from México !!
Thanks 😊
You made my christmas list easy. 😉
Glad to be helpful🙂
I might have missed something, but how are you raising the router bit? It is not being done from the top, it is being done by some other means.
You didn't watch the video carefully, watch it again, everything is shown there
It was CLEARLY shown in the video
Check at 4:01, it shows it there.
Какие крутые приспособления . Тысячу раз смотрел бы🎉😂😂😂😂😂
Very well done demonstration.
Thanks 😊
Almost perfect. All that's missing is a sliding top so that the material doesn't slide across the top by rubbing it. Half of the top with a thin extension to and abowe the cutting tool with the material attached. This sliding top would have a T-rail attached to the bottom and a sliding strip with rollers as a lower guide so that the spoil doesn't collect in the T-rail groove. (The guides should be reversed, the T-track should be at the top to slide over the slider with rollers)
Good idea!👍
There is also the possibility of using bearing rollers as a feed table for long cuts and for removing dust below the processed surfaces.. .
Thank you so much, very helpful 🌸
Glad to be helpful!
the centering of the palm router by eye will definatly deminish the accuracy.
This doesn’t have any effect, except if you decide to install a template guide bushing in the tabletop.
❤It is unique. The price is a few dollars. I hope you are always happy and healthy. Fine Thanks ❤💐🙏🛠
Thanks 😊
Great Ideas and well done
Thank you! 😊
I like it. I have a small job right now that would be perfect for that.
I'm glad my video was useful! Good luck with the project!
keep make video like this, not talking, and in the future please no music
👍
Thanks 😊
What about the rest of us that aren’t bothered by the music?
@@lyteyearz5810 and so what? He is not obliged to follow my request, it's up to him.
Não sei de onde vc tá filmando este vídeo mas estas ferramentas são muito top de mas parabéns por mostrar sou apaixonado por ferramentas ,e acho que vc também e
Muito obrigado! Que bom que você gostou das ferramentas. Também adoro trabalhar com essas coisas, você sempre encontra algo novo e interessante!
I'm thinking that with the vibrations this will experience, it would be a good idea to thread lock all the structural bolts and screws.
Here’s the translation:
I agree, vibrations can affect the tightness of bolts and screws. It’s a good idea to use thread lockers to prevent them from loosening.
loctite blue?
Yes 👍
@@coppulor6500 don't even consider Red.
@@brianfoster7064 thanks fellas
Nice I rather just have the full top assembly plate to drop into one of my existing tables. Super nice either way!
Thanks you 🙂
Looks well made really, is it on Amazon, thought it said like 250 for it...
The video description contains links to the tools.
This is so cool. I want one.
I’m glad you liked it!
Y cual es el precio es por todo o juego x juego saludos muy bonitas y muy profesionales gracias
“The description below the video contains links to all the products!”
It would be great if the rule was in Imperial.
how can we order this ⁉️
“Link in the description below the video.
should have looked at the assembly documents for the router table and put the front and back stretchers on right side up instead of upside down.
I don't understand what you mean?
@ if you look at the bottom crossbars front and back, the way you have attached them they have a larger lip on the bottom inside. That way a lot of dust will collect there because it forms a shelf that will hold a lot of sawdust. If you flip them so that the wider part is on the top facing inward, then there is no longer a place where dust can collect and pile up on the inside, and the smooth surface on the top of the crossbar gives the table a more finished and sturdier look.
Good video - very helpful.
Thanks 😊
Nice video, thanks! What is the height of the table please?
Below the video, there are links to the tools. Click on the link and check all the sizes you’re interested in.
I see no links down below.
ENJOYWOOD Bench Top Router Table- www.banggood.com/custlink/3vD954sh8c?title=1
Clamps-www.banggood.com/custlink/KKm8t0QYiF?title=2
Upgraded Precision Woodworking Multi-Angle Drill Guide -www.banggood.com/custlink/KvGIFgbyIZ?title=3
Concealed Hinge Jig with Quick Clip - www.banggood.com/custlink/mK3i50QdZo?title=4
Marking ruler-www.banggood.com/custlink/GvK9tebrE8?title=5
Ruler stand-www.banggood.com/custlink/K3K8P0QyO9?title=6
Glue scraper - www.banggood.com/custlink/GK3iPeNEjN?title=7
Woodworking Professional Rail Guide Safety Coping Sled - www.banggood.com/custlink/GKDSJifw20?title=6
Banggood Woodworking Tool Festival www.banggood.com/custlink/GGDHkQpnrd
Recently bought this table, can you recommend a Router for me to use on it??
Although this table is small, you can mount a fairly powerful router on it. I think you can go for a power of about 1000 watts. I would choose either a Makita or DeWalt.
Where are you getting your power ratings from? All I see are current and horsepower ratings…
@@robertj1701 Some free people still live in medieval age and measure their length in feet, weight in stones and power in horses. For the rest of the world there is metric system :) Also, writing month/day/year for a date is wrong and illogical :))
I most definitely agree 100%
Thanks 😊
All the red anodised stuff is like the rgb of woodwork
does it come with router?
No
I want to buy one, but I can’t see how to get it
Under the video there are links to the product, follow the links and order,
Hi! How do I find the tapping accessory for the milling machine?
write to me by email: andriusyva@gmail com
Now its 2025 and I think it works exellently without voice
Thanks 😊
Отличный инструмент, жаль, что ОООООЧЕНЬ дорогой! Excellent tool, too bad it's VEEEEERY expensive!
Hello I'm in Ghana please how can I get one
Check if delivery is available to your country. If not, you can consider reaching out to someone who specializes in international shipping to arrange delivery to your location.
О таком только мечтать можно!
Fantastic. where can i buy it
Links to the tool are in the description under the video or in the pinned comment.
привет классные приспособления😁👋
Very nice! Imho the router table is a bit expensive.
Thank you! I understand, the price can be a bit off-putting, but it’s a high-quality and reliable tool.
@avswood I believe you, looks good, but for my country it's around €250 + tax and for 300 you can buy here with guarantee, for 350 a standalone table router with the router itself.
@avswood I believe you, looks good, but for my country it's around €250 + tax and for 300 you can buy here with guarantee, for 350 a standalone table router with the router itself.
I understand your situation. You need to look at both options and weigh the pros and cons. Perhaps you don’t necessarily need such high-quality execution, and you could easily go for a more budget-friendly option. If specific features or warranties are important to you, it’s worth considering all the details. However, if maximum quality isn’t required, it might be worth looking into more affordable alternatives.
Tried to buy some of the tools but the their web sight does not complete the order. Starting to think this was a scam. Too bad too I liked some of the tools.
I understand your concern, but I want to assure you that this is a trusted and very well-known website with a good reputation. Sometimes, technical issues can arise that prevent the order from being completed. Please contact their customer support - they will help you resolve the issue and complete your purchase. I hope this helps, and you’ll be able to order the tools you like!
@@avswood Has anyone else tried using Paypal with this website? I hope it is a just a glitch. I'll try and see it their tech support can resolve this.
Ce magnifique comment peut on avoir ca ici en rd Congo precisement ville de kananga ca coute combien?merci merci
All information is under the video
Благодарю за ответ. Также и за видеообзор
Is this from Chinese market
Yes
May u mention there make, name and prices as well❤❤❤❤
I left links under the video and in the pinned comment.
Love every single one of then 😎😎❤❤
Thanks 😊
Does the router table take a big router like the elu with a 1/2 collet.
The distance between the mounting screws is maximum 132 mm, check what size you have
They have nice things, but…
When you get something broken, they won’t pay your money back. Try to offer you points of half of the price, like it’s some kind of negotiation platform.
It’s a nightmare dealing with them.
Thank you for your feedback. I’m sorry to hear that you had difficulties. Personally, I haven’t had any defective items, though some products were not of the highest quality - but given their low price compared to competitors, it was expected. I recommend reaching out to customer support with your order details; hopefully, they can help in your case.
ah anodized aluminium with laser-etched lettering and numbers, you have my attention.
Какой классный инструмент!!! Как такой преобрести?
Информация под видео.
Well Well Well you just had to show us this just when I was finally going to try and make a router table you had to share this I am going to wait until 7 or 9 months from now till we can save up for that and your drill machine and the last one the ruler I'm just on set income raising our 3yr autism grandson and 12 years old granddaughter will be worth the wait thank you for sharing your experience and new tools for your business this is what I will be able to do thank you Bill deaf man can woodworker from Kansas
Here’s the translation:
Thank you for your comment, Bill! I understand how important it is to approach purchases thoughtfully, especially when there are such important priorities. It’s great that you keep working on your projects despite this. I’m sure that when you save up for the right tools, your work will be even more impressive. Thank you for your support and patience - good luck to you!
... only before #7:30 show chipping devices - and then suddenly freehand over long pages. VERY dangerous! RUclips isn't everything - technical training is important for such work (not just "nice")... THX anyway for showing the tools
The tools are nice but it takes a lot of money to buy them
“High-quality tools are always an investment that pays off during work. They last longer, simplify tasks, and deliver excellent results.
What is the cost in australia
Check if delivery is available to your country.
Здравствуйте. Какая цена за все? Благодарю. Круто
Здравствуйте!
Под видео есть вся информация
Благодарю. Жаль что в Украину этот магазин не отправляет😢
Можно заказать знакомым в Польше, Германии
@@avswood Благодарю. У меня дочь как раз в Германии.
Я так понимаю это один стол,прижимы и все остальное отдельно?
Да, там на каждый инструмент есть ссылки
Точность достигается за счёт продуманных роликов да и система сделана качественно!
Hi there. Ps do you know if I can install a router lift with this?
Not sure about that, but you can try contacting customer support.
Let’s take it all the way ! Next time no video either!
Is this the Asian version of Woodpecker tools?
How many dollars did you buy your equipment for, my friend? I worked 20 years to buy the equipment you use, I can't😭
Buy what you can afford and stop whining
Stop whining
все это красиво удобно но очень дорого да и обычному пользователю никогда не окупится женщины покупают сумочки в бутиках а мы покупаем вот такие красивые приспособления чтобы удивить самого себя хотя это и не выгодно
Хубава презентация, но не мисля, че бих платил за играчките! На видеото се виждат неточности в шаблоните! Все пак, поздравления за презентацията!
Excelente Fantástico OK para hobistas e pequenos trabalhos
Muitíssimo obrigado
Beautifull 🎉
Thanks 😊
Th as t is cool my friend.👏👍🇺🇲
Thanks 😊
Schön das ganze, aber der Verkaufsplattform vertraue ich kein Stück
That’s a big mistake!
They look good but at that price they should be. In my opinion they are too expensive and if you have a problem with them there is no warranty, then you throw them of the window
At first glance, it seems expensive, but if you think about how long they will last and how good they look, it’s worth it. Sometimes it’s better to buy a quality item once than to keep replacing cheap options every year.
I like the drill press, it seems to be well built.
Yes there is!
En donde lo puedo comprar si, me interesa.
ENJOYWOOD Bench Top Router Table- www.banggood.com/custlink/3vD954sh8c?title=1
Clamps-www.banggood.com/custlink/KKm8t0QYiF?title=2
Upgraded Precision Woodworking Multi-Angle Drill Guide -www.banggood.com/custlink/KvGIFgbyIZ?title=3
Concealed Hinge Jig with Quick Clip - www.banggood.com/custlink/mK3i50QdZo?title=4
Marking ruler-www.banggood.com/custlink/GvK9tebrE8?title=5
Ruler stand-www.banggood.com/custlink/K3K8P0QyO9?title=6
Glue scraper - www.banggood.com/custlink/GK3iPeNEjN?title=7
Woodworking Professional Rail Guide Safety Coping Sled - www.banggood.com/custlink/GKDSJifw20?title=6
Banggood Woodworking Tool Festival www.banggood.com/custlink/GGDHkQpnrd
Hi, can you tell me how thick the router table is? Is it strong enough to support heavier routers?
I still need to try it out, but I can already say that I’m pleasantly surprised by the quality of this router tabletop. It will definitely handle heavier routers!
just put some rubber under that drill press. thing slips around way too much.
Good idea, but I think it’s also because I’m not used to it. For some precise work, I think I’ll be pressing it down with a clamp.
Excelente ♥️♥️🌈👍👽
Thank you! 😊
did you get this tool from Temu usually they advertise a huge size tool and they ship a mini size
information under the video
Cuánto cuesta la mesa para el rauter o fresadora
there are snares for tools under the video
Seems super chincy. A router table for a trim router seems pointless since a router table doesn't restrict size since you know, its a router table.
I"m impressed! But not with the price.
I love gadgets.
Thanks 😊
How Much is it?
I showed it in the video, and there are links under the video!
I want to buy
there is a snare under the video