DiY Circular Saw Guide out of Laminate II Homemade Track Saw
HTML-код
- Опубликовано: 17 ноя 2024
- I decided to make circular saw guide, as its needed in many projects, and I share my idea with you. I hope it's will be useful for you. Thank you for watching!
Tools I use, and can recommend for you:
Makita Wood Router: amzn.to/3XtTmpD
Bosh Router Bits: amzn.to/3z8xGpQ
Dewalt Drills Set: amzn.to/4cMQVD6
Makita Circular Saw: amzn.to/3ZbxZL7
How to build Bandsaw: • Building Small Bandsaw...
How to build Tablesaw: • How to Make homemade T...
#craftydude
#diy
#woodworking
![circular saw guide track jig for precise cutting [woodworking]](/img/1.gif)
i like the silicone sealant idea - that's great.
Finally someone has find a way to put those Left over floor laminate into good use. Don't forget to spend $20+ bucks for glue if you want to build this guide.
The silicone as anti slip is brilliant! Thank you so much for sharing.
I did exactly the same thing but with vinyl flooring after watching a Ask This Old House video. The silicone for anti-slip is genius!!!
I agree. I was thinking "Why don't you add a guide to your silicon?" When I saw what he did I thought "Brilliant!" 😊😊
Yeah the silicone for anti slip was the most impressing part. Thank you so much.
Согласен! Вроде - очевидно! Но в то же время - кто бы мог подумать?
Thats awesome. I've been hacking with clamps and alu bar for my camper build, but I think now im on v2.0 this will be a massive improvement in cuts and efficiency.Thank you!
Bugüne kadar izlediğim en başarılı proje. Tebrik ederim.
I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great ruclips.net/user/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.
Great idea. We recently re-floored our fixer-upper with vinyl plank and I have a few leftover pieces, so this project will just cost me an aluminum bar. I had been thinking of making it from 1/2" ply, but this is thinner and lighter. Thanks!
Great👍👍
Careful with cutting through thick wood. The saw could jump up of friction in the gap, it happened to me using a plungesaw with real track
Hello, congratulations on your construction.
The idea of silicone on the sole is perfect; the only flaw I could find in your creation is the loss of over a cm of cutting depth: I made a similar guide with 10 mm MDF on which I passed with the original sole of the saw and I found myself cutting two panels from 28mm without reaching the bottom (with a 210mm diameter blade!) Now, on the side of the sole I have welded two guides obtained from connecting pieces of aluminum bars 20x20 or 20x40 etc. those bars used to build the 3D printers and I use one or two 20x60 bars (1000 + 1000mm long) as a guide to which I created sliding clamps with a side strip, long enough to lock and position the 20x60 guide correctly
Hey, nice to see you again!🤝 I believe you made really great guide. I dont wanted to spend too much time and money for this, in these days that cnc bars cost nice amount of money. My saw is pretty big and I still have 50+ mm of cutting depth, what is enaught for all cuts I making.
Clever move with that silicone. Nice build, & thanks for sharing. Aloha
Really nice use of material that sometimes just gets thrown out. I have a few boxes of this stuff that I picked up really cheap from a Habitat for Humanity store. I knew eventually it would come in handy. Thanks!
Also you could apply basically the same materials to make an adjustable dado cutter for your router. You would just need some small adjustable wooden blocks on the side of the two panels and a couple of knobs. Great video.
Could you connect two of these to make it so you could an 8’ sheet of plywood maybe do a set back on the rod and then allow the back piece to extend over the other to help inter lock it
I’ve watched so many videos on make a track saw, I new yours video was my guide to make one. Thanks for sharing!
Great to hear!👍😎
Absolutley great idea and very good guide for copy this. Thx a lot.
👍😎
Brilliant, just......brilliant! And the silicone, unbelievably simple yet effective. Perfect for those of us who have small workspaces but still want to enjoy woodworking. Thank you for sharing.
Thank you👍🙂
That was FANTASTIC!!! Exactly what I was looking for to cut the 8' of plywood sheets in my shop! Thanks!
What an awesomely designed and funtional piece of equipment! This video occupies number one in jigs library. Great engineering there Dude, keep it up! I wish I could like it 10k times. And thank you so much for sharing.👏👏👏👏👏👍👍👍👍👍👍
Glad you like it!👍🙂
Nice video, good ideas for making a circular saw guide. Like the silicone surface for non slip
Cool and very creative that being said I’m glad I can afford to just go buy a track saw and tracks
What an awesomely designed and functional piece of equipment! This video occupies number one in jigs library. Great engineering, keep it up! I wish I could like it 10k times. And thank you so much for sharing.👏👏👏👏👏👍👍👍👍👍👍best ive seen yet, until i make mine
Thank you👍🙂
Or just buy one....
I like the tape trick to apply a thin even coat of silicone.
Me encanta... Lo haces ver tan fácil, lo haré de todas maneras, muchas gracias, un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
gracias👍
Best DIY track jig I've seen yet 😊
Прекрасная работа,спасибо.
nice trick with the silicone!
Brilliant with the silicone 😊
This is cheap and a brilliant ,design I'm making this.
😅😊
Simplesmente a melhor ideia de guia para serra circular manual 👏👏👏👏👏👏
Спасибо, отлично получилось!
Parabéns amigo, vou tentar fazer uma 👍
Brilliant!
That silicone anti slip method was brilliant
I true wood like that using an L fence on my table saw. I feed the wood against the fence using a long plywood straight edge that has handles attached topside and sandpaper under neath for non-skid.
Thank you very much for your idea.. will definitely make one..
Simplesmente a melhor ideia de guia para serra circular manua
This is great!!
How wide and deep did you go with the router in the piece of flooring?
Its 10x10mm bar, so I fit half of it in laminate plate
Amazing 😮👌🏼💪🏼👏🏼👏🏼👏🏼
Super .simple and elegant
Thanks for sharing you great work i love it
👍🙂
Good idea. And the execution of the device is beautiful. I would like to ask what is the diameter of the MAKITA circular saw blade
Its Makita MG5008, with 210mm saw blade diameter😎
Que medida es el triplay de madera
Best part was the vacuuming. Can we please see more vacuuming? That would be great.
A ti te gusta chapusas
Very good and easy to make idea
Классно хорошая идея
great video, but there are no sizes, measurments, etc, to make this, do u have them available.? i am a general contrator and would use this daily..pls advise.. would like to make one...many thanks
One meter lenght, and width is as original laminate plate
Any track saw made out of wood will warp overtime due to the moisture and it will cause splinters.
Yes, but laminated mdf is not the same as wooden board🤔
Really great video.... It's the best homemade track saw on RUclips! By the way, have you tried 45 degree long miter cuts with the track? Thanks!
Thank you👍😎 no I didn’t try 45 cuts, Im using guide to split big boards in to smaller, then it goes on a table saw
excelente y muy sencillo gracias por sus aportes tienes un like
gracias👍
awesome trick, thanks a lot
👍😎
Brilliant, dude! Really fantastic work!!! 😃
Stay safe there with your family! 🖖😊
Thank you👍🙂
0
Sangat bermanfaat tutorialnya
Great idea good job
The best solution ever 🎉❤subscribe you 😊
Have you tried this with long miter cuts?
I didn't use it for bevel cuts yet, but it suppose to work on it😎👍
Ciao come fai prendere le misure per pattino? intendo i 2 legni che attacchi sotto la piastra. La misura la ricavi semplicemente misurando? grazie bel tutorial
Mi limito a misurare
Good job
Thank for sharing your video
Thank you for watching my channel😉👍
That's a very nice
muito bom .valeu gostei.abraços tmj.
Hi I also have 5008 MG, is it usable for 45 degree angle?
I used it for angle cuts, not 45 but 20+ I think, it cut without any problems, but with angle cut you will cut out edge of guide and then you back to 90, guide edge wont match with saw blade. Same problem with original guides, but they have changeable rubber strip
@@CraftyDude ok so we need 2 of these guide for 90 and 45
In love 😍
Thanks for sharing
🪚🪵👍🙂
Where did you get the aluminum bar? Have a link?
I find it in my local shop
Excellent!!!
Great video ! I will try this ! Simple , effective. Gets the job done . What model is your circular saw ?
Makita 5008MGJ
Brilliant 👏 👏
Muito bom, parabéns! 🇧🇷
I just saw this 08May24. I am somewhat confused.
I understand that vinyl plank flooring is truly temperature and humidity stable. But by the time you buy a box of vinyl plank, the aluminum square bar and the saw to dedicate to the system you're into the budget track saw world. The other thing is...well, how you gonna make an eight foot track? How you gonna splice vinyl plank together? I just retired from flooring installation and in all my time I never once saw 8ft vinyl plank.
... just sayin'
This saw is not compatible with original makita saw guide, by reusing waste material I find out cheap solution of this.
Ok. I understand a little better now. I wasn't really dogging on you...just couldn't understand why you did what you did. Now I get it.
By the way...I have made several 'advanced' bases for my Makita trim router with LVP job scraps...larger simple base, a step base that allows me to cut dadoes 1 1/2" apart (for 5" sanding disc storage) and a 30" trammel for cutting circles up to 55" in diameter...so, I get it...just didn't understand it at first. I never once thought your work was shoddy or faulty, nor the idea insane...just didn't understand at first.
Your response made me subscribe.
Nice jop bro 👍👍respect
Perfekt
Que buena idea!! Me apunto a tu canal!!🤙🏻
👍🙂
@@CraftyDude voy a probar hacerla!👍🏻
A saw guide can be as simple as a 3 piece wood strips and boards, and the price is lesser than $20. It all depends on what type of guide you want to build.
Well if you get straight enough cuts,for your project, means that you jig work properly😎👍
Most problems have more than one solution. It depends on you what you choose, some people are willing to put more effort into achieving the goal they are looking for. I’ve seen people use a lump of fire wood to pound a chisel, others use a mallet made of rare woods, each to his own……..
True, and I have one but I have found that I don’t always do a good job holding it to the guide. I believe it is that my saw does not have a nice flat side probably because it is a cheap pos but! I don’t want to replace something is not broke.
@@Jamesmyatt1313 ：Do you add a T track and T track clamp on the saw guide?
@@City-Hiker no I’m going to make a new one with something to hold it inline. Not a fan of t-track, probably going to have something that hold the saw against the edge or some kind of slot that a piece of the saw base will go in. Hard to explain. I have been looking a many different ones and trying to figure out what I want to do.
I like the simplicity of this build. But we have 3 layers of laminate between the base of the saw to the cut piece. That's a lot of depth loss
It is some depth loss, but its a problem just when you need 5+cm depth of cuts
@@CraftyDude you are right with a regular corded saws. But nowadays, the cordless saws are quite mainstream and they have a much smaller blade.
the thickness of the boards? Thanks
8mm👍
no las haces para vender ?
no, solo estoy compartiendo mis ideas😎
super
Mantap
Buenísimo beutiful
👍🙂
По ламината прошёлся фрезером и фрезу в мусорный бак
why didn't you make it a full legth 8 foot or more ?
For me that length is good enough🙂
Wider gap instead of drilling holes
What thickness is the laminate please?
8mm
Measurements ?
Its measurements differ by a circular saw brand, so I dont share this project plans
Any plans available please
Hola.Yo lo echo con dos cariles.
Y he puesto dos carriles aluminio que entra en la otras directamente en base de la maquina
👏🏼👏🏼👏🏼. 👊🏽
I did not find the moment where the marking for the hole in the sole was made .
I just measure that places where looks good for a screw, but that moment is not added in video
@@CraftyDude I see, thank you
Can you cut bevels with this? It seems to be the downfall of all these diy tracks. No one can cut a bevel.
wher can i see the part list and quantities ?
Guide made from 1 meter length 10x10mm square aluminium bar and flooring laminate, all other parts sizes must be sized for a circular saw you use👍
👍👍👍👍👍
Profesional ok
дЕльная вещь !
No need for a channel. Just use the raised edge as a guide. Simple
Channel helps, no need push to guide side only forward, straight cuts easy👍
Then you could move away from that edge.dah
As always with such a design absolutely uninterested of cutting depth ;(
I get 5+cm of cutting depth, usually its enaught👍
@@CraftyDude Good luck to you. I need more often enough. I'll have to buy a table saw.
👍💕🙏🙋♀️
You have no idea what easy is to work with my Parallel Guided Power Saw, you may see on youtube
lol solution🥴
Vraiment très bien !
Супер🤝🤝🤝🤝🔥🔥🔥🔥🔥🔥🔥🔥👍👍👍👍👍👍👍👍👍👍👍