9:50 after working my way through dozens of videos of the past couple weeks when Cayleb says "believe it or not, we have more problems" my first thought was don't worry, I believe it! lol that could be a new shirt!
This shows as your first vid, but it seems like there are earlier ones? Just found your channel recently and am catching up. On the thing with marking the hole with the spray paint, maybe use a thin long red straw attached to the paint can, like comes with WD40.
Since the LS injector rails can be swapped you should at the time reversed them so the front gas connection would be running in the back with no need to make that bracket.
I love the videos. Hey something i found just recently to help with deep hole markings are these "Dixon Industrial REACH- Deep Hole Permanent Marker". You can add them to your amazon order!!!
Looking good! I'm guessing that with the exhaust near the neck of the intake that you weren't able to run the fuel rail connector pipe on the rear? What little I saw looked tight. Can't wait to see this rig running!
13:09 sigh.... Layout fluid, Dykem blue. Paint it on the piece and shove... whatever through the hole punch screwdriver heck the bolt you are gonnna use, and it will scratch off the Dykem exactly where you need to drill.
So that was something that we custom made from 2 adapter plates that convert the throttle body mounting from 4 bolt (car style) to 3 bolt (truck style) with a pice of 3” aluminum tubing in between cut and beveled for the perfect angle!!
@@PeckBrothers Thanks. It looks great. Looks like I'm making one too. Trying to keep a manual fan. My holley intake angles down and looks like something from Star Wars. Great build.
Doses your LS engine have a tensioner on the alternator to tighten up the belt I really don't know because I have never messed with a ls engine for real guys for real okay thanks Charles Williams later on jelly beans lololol later on bro please just be safe at what ever you are doing in your life okay thanks again Charles Williams later on jelly beans lololol
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
Your guys' videos have inspired me to build my own tj
They make transfer punches that work pretty good for stuff like your alternator hole 👌 glad to see some RUclips content, keep it up!
Dang we are going to look those up and get some ordered up 😂😂
You can put grease on the end of the bolt to make your bolt circle.
What zack Kelly said transfer punch for the win cool video!
Thank you 😁 we are stoked you like it!!
Great great words there at the end. So true! I wish I knew more about building stuff. Would have saved a lot of money.
Haha it’s 50/50 weather or not your will save money 😂😂😂😂 thanks so much for watching!!
Amazing work. And congratulations on your marriage.
Thank you so much we appreciate your comment more than you have any idea!!!
Interesting seeing how guys you started out and how far you've come..
9:50 after working my way through dozens of videos of the past couple weeks when Cayleb says "believe it or not, we have more problems" my first thought was don't worry, I believe it! lol that could be a new shirt!
This shows as your first vid, but it seems like there are earlier ones? Just found your channel recently and am catching up. On the thing with marking the hole with the spray paint, maybe use a thin long red straw attached to the paint can, like comes with WD40.
Just started watching your vlogs. Been watching Fabrats for awhile. Your Vlogs popped up. They are pretty cool. I am enjoying them. Thanks
Smart man . Faceshield and gloves .with that death wheel
Looking forward to binging all your vids! (I’m older than your Dad)
Since the LS injector rails can be swapped you should at the time reversed them so the front gas connection would be running in the back with no need to make that bracket.
Dad's jeep sounds good 👍
It’s so loud it hurts when he is wide open 😂😂
Is it open headers ???
I like the way it sounds for surec
Or you could use a drill bit thru the alternator hole to mark where to drill the mounting hole😊
You guys have some beautiful rigs. Love the videos
thank you!!
@13:10 I put grease on the tip of the bolt and dab it on the other part.
Videos have been great keep it up👍
Thanks dude 🙏🏼
I've gone back to the start :o only couple years late
I love the videos. Hey something i found just recently to help with deep hole markings are these "Dixon Industrial REACH- Deep Hole Permanent Marker". You can add them to your amazon order!!!
We need to look into them for sure!!!! 😁😁 thank you!!!
Looking good! I'm guessing that with the exhaust near the neck of the intake that you weren't able to run the fuel rail connector pipe on the rear? What little I saw looked tight.
Can't wait to see this rig running!
That’s exactly why we ran the fuel rail inlet on the front!
An old fashioned pencil.
A piece of all thread and 2 hymn joints and an adjuster nut could of saved you some time. They use that set up on hot rod motors for accessories
New to the channel so starting from the beginning…. But I have a feeling this is not there first video?
Screaming Eagles 🦅 🇺🇸💪🏼
my 2003 tj brought me here
So out of curiosity, what do y’all think the final cost to build this Jeep?
way too much😂
Right arm brother
Poor baby no heat on his little feet, lol..
The pick came like that🙃
Sure it did 🧐😆
😆😆
Deep respect for anyone who runs Swampers lol
Keep the vids coming
Aye aye captain!!! We will have a new one out on WEDNESDAY‼️
Jeeps looking sexy! Good luck and keep the videos comin!🤘
Thank you SOOO much!!! We bet man, the videos will keep pouring in 😁😁 please share!!!
🔥🔥🔥
I'd like to wheel with you brothers, but i'm in Texas and have a Bronco. Maybe one day my friends.
I’m sure we will be down in Texas at some point!! 😁😁
Man, u guys are great! Keep those vids coming! Rigs are lookin good! Enjoy that cold ass weather! Lol Sending some Florida Heat your way! 🌴☀️👍🏼
Haha will do man thank you!!!
13:09 sigh.... Layout fluid, Dykem blue. Paint it on the piece and shove... whatever through the hole punch screwdriver heck the bolt you are gonnna use, and it will scratch off the Dykem exactly where you need to drill.
There you go, that’s a good idea!!
Better idea Q tip with paint
That’s a way good idea 😂😂😂
Where did you get the throttle body angle adapter?
So that was something that we custom made from 2 adapter plates that convert the throttle body mounting from 4 bolt (car style) to 3 bolt (truck style) with a pice of 3” aluminum tubing in between cut and beveled for the perfect angle!!
@@PeckBrothers Thanks. It looks great. Looks like I'm making one too. Trying to keep a manual fan. My holley intake angles down and looks like something from Star Wars. Great build.
Hello from your oklahoma uber driver great video
Tobie my man! Thanks for the ride and thanks for watching!
Could put painters tape on it and use a nail and tap it like a punch.
That’s a dang good idea! Haha wish you woulda been with us 💡😂
🤘🏽
Doses your LS engine have a tensioner on the alternator to tighten up the belt I really don't know because I have never messed with a ls engine for real guys for real okay thanks Charles Williams later on jelly beans lololol later on bro please just be safe at what ever you are doing in your life okay thanks again Charles Williams later on jelly beans lololol
You Guys Need A Instagram
We have one! Look us up @peckbrothers