Scared of using a rotary polisher? Watch this

DIY Detail Gold Standard Polish: bit.ly/GoldSta...

[@diydetailofficial]

DIY Detail Gold Standard Polish: bit.ly/GoldStandardPolish

[@OfficialSkankHunt42]

I wish I could go to this dudes shop and hang out with him for a little. I feel like he’d be such a good teacher for me

[@diydetailofficial]

Thank you.

[@stevenv9224]

It’s all that muscle you have Yvan 😉 👍👍👍👍

[@diydetailofficial]

lol

[@michaelscott7706]

Absolutely I did my Dodge Durango with a Dewalt rotary and soft cut pad with Meguiars D151 Paint Reconditioning cream. Rotary definitely is way better than a DA. Best thing no excessive vibration and just put the machine on low and lock the trigger. Love waffle pads.

[@diydetailofficial]

so smooth, right?

[@marybetheby5184]

Anybody saying d.a. all day must love sore arms..Eff that vibration..

[@ajmasse5535]

I use a majestic solutions brand and let me tell you. That thing likes to pull me around and I don’t use high speeds

[@diydetailofficial]

Lots of great rotary machines out there that are reasonably priced

[@rayoflight39]

For some reason, I hardly use my rotary because I am scared I will burn through paint... It is just the stigma that gets passed on....

[@Carlos.Rivera]

With wool clogged with dried grity compound that doesn't know what a wash is... sure

[@diydetailofficial]

It’s all technique.

[@rayoflight39]

@@diydetailofficial Thank You, been watching a ton of videos and playing with it

[@JHNate]

Thanks for the video! Could you tell me the brand/model of that backing plate you are using on this rotary polisher?

[@diydetailofficial]

Lake Country👍

[@JHNate]

@@diydetailofficial Thanks!

[@radekliko526]

Thanks for the video content. I recently ordered Flex XFE 15 150 18.0 and Flex PXE 80 10.8 on which I would like to build up my skillset and later offer my detailing services in Switzerland. Heard Flex can be a little under powered. However, once my skills develop while cars paint quality varies. Would you suggest in order to add value to my tool collecting to order 21 Milwaukee as being the better choice or still 15 Milaukee despite I already have Flex 15. The point I would like to make is to avoid buying two same tools without adding value.

[@diydetailofficial]

The longer the stroke for a DA the better

[@radekliko526]

Thanks! Milwaukee 21 then. :) I will need to sleep over it, as some say 21 that its good for large panel areas. Milwaukee 15 I see as tool which would add more performance of the motor againts existing Flex. However, if I understand correctly 21 would still be even greater choice againts what I already have.

[@diydetailofficial]

Correct

[@josiahloubiere7742]

Looking to buy a rotary. Does this one really compete with a corded power wise?

[@diydetailofficial]

Yes

[@orthodox1717]

Speed 1 for removing sanding scratches?

[@diydetailofficial]

Yes

[@zero1000]

Yup. I have seen the need to go past 3 on a rotary

[@Steve0885]

I'm all over the place with that same rotary 😬

[@diydetailofficial]

3 things to make it easier, Never use a flat pad, waffle pads only. Do not use pressure on the machine, finally don’t try to move it around, use a light touch, use the trigger lock, relax your grip, and simply guide the tool.

[@thesamsquatch5224]

Rotary really gets a bad name but it gives a better finish than a DA and creates less heat

[@diydetailofficial]

Correct

[@detailchicks]

What's the rotary brand?

[@diydetailofficial]

Milwaukee

[@felixf5211]

For polishing, I usually spin my rotary at 800-1000RPM with a 5.5" pad. Would you recommend a lower speed?

[@diydetailofficial]

If it can go lower, yes

[@cedricchoice9750]

Milwaukee rotary

[@diydetailofficial]

yep

[@itsjustme77]

I'm about to buy either a Milwaukee M18 Rotary, or a M18 Random Orbital 15mm, or the 21mm based on your recommendations. Which would you suggest? If I could afford two should I get the 21mm and the Rotary?

[@diydetailofficial]

21 and Rotary is good

[@lawrencesordotcom]

Where can I buy?

[@diydetailofficial]

Where are you located?

[@ang2202]

My lowest RPM on my rotary polisher is 800. With proper technique, is that okay to use the polisher safely?
Thank you

[@diydetailofficial]

Yes.

[@yasenschannel2337]

What kind of polisher/buffer is this?

[@diydetailofficial]

It’s a cordless rotary from Milwaukee

[@OCDetailerz]

Which backing plate is that? Aftermarket? I only see the 7 inch rotary from Milwaukee. If that's a 6 what conversion kit is that? Is the red jeweling pad a must for that setup?

[@diydetailofficial]

It's the 6 inch rotary plate from lake country, I believe. You can get great results with a little more defect removal from our yellow waffle pad seen in the video, the rotary jeweling pad (coming in July) is just for that final step to amp up gloss and remove light imperfections or compound haze

[@waxmanvids5015]

I am looking on Lake country's website for the 6 inch rotary backing plate and it has two selections a 14 mm & a 16 mm thread size do you know which one to Milwaukee uses?

[@diydetailofficial]

It uses a 5/8 11 thread in North America

[@LilRedthang]

It’s battery operated. Not enough power to hurt you

[@diydetailofficial]

Not hurt us, many people are afraid of damaging their paint

[@marty232]

I think the misake I was making wad having the speed up to fast

[@diydetailofficial]

It’s common

[@sebastianbutler8520]

Me too bro took a while to figure it out too

[@menjaditaat]

Dual action is way more better

[@diydetailofficial]

for cutting or finishing?

[@menjaditaat]

@@diydetailofficial both of cutting and finishing

[@edbio231]

which milwauke is that?

[@diydetailofficial]

Here's a link: amzn.to/3sEp06P

[@PREDATOR07]

Do a complete vehicle.

[@diydetailofficial]

we've done many here on the channel:)

[@PREDATOR07]

@@diydetailofficial With rotary 🤔 ¯\_༼ •́ ͜ʖ •̀ ༽_/¯

[@HelloWorld-zz5fr]

Daaaamnn

[@diydetailofficial]

🙏🏻

[@lawrencesordotcom]

Where can I buy?

[@diydetailofficial]

DIYdetail.com