@@MYKEYSAUTOMOTIVE Hello, Friend. I'm from Ukraine, and I'm a subscriber to your RUclips channel. Thank you for your videos, which provide a lot of valuable information. I'm new to immobilizers (just getting started). I try to make a key in Audi A6 2013, a car from the USA without a key, Imo 5th generation, read Autel 608 on the table BCM 2, KTAG read MED 17.1, ( flash eeprom) (Autel could not). Autel asks to read the ELV and TCU blocks. And then Autel may or may not do it. Have you ever made such a car, and is it even possible to make it Autel 608 ? Thank you how can I contact you? Sorry for my English, I use a translator
@@MYKEYSAUTOMOTIVE buenas tardes varón muy buen video tengo una pregunta yo eprogramado llave para BMW pero nose porque el control no me queda travajando cuando el chip viene soldado en la Placa del control supongo que debe de funcionar al programar el ensendido
Lol I love the Russian part I added in the end. Honestly applaud you getting this info out that is hard to come by. I didn’t even need this but I’m glad I learned something that might benifit me in understanding the systems of bmw vehicles and other vehicles in the future.
Programmer then write key via dump then back to programmer. This im608 pro is long winded. Like to go between the two you have to come back through settings. Then in to the other. Still cant get mine to read 93c66 chips. Just bought a junkyard cas3 so do this later
Increíble video campeón 👏 💪🏼 un saludo estoy aprendiendo en la base de bmw y me has ayudado muchísimo y veo que estas atento a lps textos aún que ya tienes experiencia gracias un 🤗
Thank you so much for your help. This is my second attempt to make a cas3+ istap on bench and during the process it reads chip but once I'm going to load data shows a message: error code 4096. I'm doing everything right but I just can't make
Buenas, gran aporte el suyo señor. Quería hacer una consulta, quiero programar una llave a un Mini cas3++ y cuando lo hago por OBD luego de programar aparece todo en F, es como si no la grabará. Si edito la llavey colocó el ID, el mando funciona pero la llave no arranca el auto. Alguna ayuda? Gracias
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
I appreciate the fact that you made the video bilingual! Thank you. What is the programmer that you are using? My days of turning wrenches are past but I still perform mods and keys but am very limited on the keys right now due to programmer constraints.
He is using the Autel IM 608 pro. It comes with all the adapters you seeing the video. I have that programmer and it works great! A new updated model of this programer is out as well.
Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway! You can only join From a desktop or a laptop next to the subscribe button. Thanks!🙏🏼❤️
great work. Seems straight froward process. You remove the board, solder your points, read the file, edit the file (by adding key data) then saving it back to the chip. Soldering takes practice :) Can we not be connected in order to get the diagram from autel? or does it have to be connected somehow in order to get the diagram for solder points??
I've programmed 2 sets of keys (5 total) to cas3+ via key dump. None of the keys work when plugged back into the car. No response from 1st set.of.keys. 2nd set of keys shows the key with a slash through it on the dash. Help? How to sync the keys?
Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway! You can only join From a desktop or a laptop next to the subscribe button. Thanks!🙏🏼❤️
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
I subscribed to your channel If you can not answer no problem. For descript cas3+ dump you need isn or working key. You read cas3 not cas3 + . or autel can write cas3+ key without descryption
No friend No. You make cas3 key or you had working key or ISN. Autel can not read isn from ecu or cas3+ by obd . very strange . not possible make cas3+ key using only cas eeprom file. Not real. If I am wrong pls tell me
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Thank you sir! Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
Hey bro I am getting problem File version error![Error Code: 4096]” when trying to load the file it did read the EBROM correctly but can’t load the file please help
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
That’s really impressive how easy you can do this😃💪👍👍👏. Could you tell me what else you using to write key via dump on bench??? Because I have autel im 608 too but is not gonna do all cars😏💁♂️. I have key tool max and kess3. But anything else you can recommend for example? Thanks alot for the hard work you shared with us 👏
¡Hola, saludos! 👋🏽 amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
No need to read and update flash? No ISN needed from DME? Everybody says something different. I like your videos. Keep getting BMW X5's with CAS3+ ISTAP. Seems like everyone of them is an N62 DME and I can only get a 4 digit DME number. How is this working without having to write ISN#?
Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway! You can only join From a desktop or a laptop next to the subscribe button. Thanks!🙏🏼❤️
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hola máster una pregunta hice un cas 3 2007 por banco seguí todos los pasos que hiciste pero solo funcionó el arranque y el control remoto no funcionó utilize 315 como decían los datos del auto al entrar con el scaner me faltó algún paso con el isn o algo?
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
I use Autel im608pro Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hola mike espero te encuentres bien, sabes que hice ese procedimiento para un 2011 bmw 328i. La 1ra vez no quedó, hice unlock la llave y volví a hacer otra vez todo el procedimiento, para cuando regresé habían cambiado el slot donde entra la llave y la batería estaba mala, entonces puse el cas para atras y se le pasó carga a la.batería del carro, presiono los botones del remote y si funcionan pero al meter la llave al slot no se prende nada en el.tablero ni siquiera el.foco de que es llave mala. Sabes que pudiera ser el.problema?? Por favor
What about this then. Went to a VW Caddy 2005 and plugged in OBD it said before asking for the new key, it said security verification not passed. Autel after asking them replied saying, Dear friend, Please try path : expert selection > immo4 instrument CAN>Auto detect > to try to read anti-theft data. Thanks for choosing Autel products! Whats your thoughts...?
hello friend! please make sure you join our members club for priority commenting! you can join from a desktop or laptop next to the subscribe button you will see the join button! thank you 🙏🏼🙏🏼❤️❤️
Una ves realiza la escritura del nuevo archivo con la nueva llave programada en el Cas3+. , se debe hacer algo más? Por qué al montar el Cas3 al vehículo el scanner Autel reconoce la llave agregada pero el vehículo no la reconoce. Esa es mi duda
Like seriously this is masterclass, Bro please help me with data to clone the exam cas in the video, mine is unreadable. Or if you can assist me with a link which can lead me to the download cas data download Web please please
Brother people like you deserve a salute in this day nobody wants to share information but you are thanks a lot
Brother thank you God bless you
@@MYKEYSAUTOMOTIVE
Hello, Friend. I'm from Ukraine, and I'm a subscriber to your RUclips channel. Thank you for your videos, which provide a lot of valuable information. I'm new to immobilizers (just getting started). I try to make a key in Audi A6 2013, a car from the USA without a key, Imo 5th generation, read Autel 608 on the table BCM 2, KTAG read MED 17.1, ( flash eeprom) (Autel could not). Autel asks to read the ELV and TCU blocks. And then Autel may or may not do it.
Have you ever made such a car, and is it even possible to make it Autel 608 ?
Thank you
how can I contact you?
Sorry for my English, I use a translator
I agree with you 100% I watch all his videos
Top notch!
@@MYKEYSAUTOMOTIVE buenas tardes varón muy buen video tengo una pregunta yo eprogramado llave para BMW pero nose porque el control no me queda travajando cuando el chip viene soldado en la Placa del control supongo que debe de funcionar al programar el ensendido
I watch many videos but no one explains it as beautifully as you.
thank you sir
Bro thanks for your video! I just started working BMW and it so happens to be a CAS3 system. Keep up the amazing work you do on here.
Thank you brother glad you liked it!
Liked the video before it even started because this is the stuff automotive locksmiths need! Thx bro
Brother thank you! Glad u liked it!
@@MYKEYSAUTOMOTIVE hola sepuede aser un 328i por el cas sin leer el Isn
Lol I love the Russian part I added in the end. Honestly applaud you getting this info out that is hard to come by. I didn’t even need this but I’m glad I learned something that might benifit me in understanding the systems of bmw vehicles and other vehicles in the future.
Thank you sir! God bless you appreciate the support!!🙏🏼🙏🏼❤️❤️
Eres un fiera... siguiendo tus pasos salió a la primera, así es como se explican las cosas... enhorabuena
Gracias !
Programmer then write key via dump then back to programmer.
This im608 pro is long winded. Like to go between the two you have to come back through settings. Then in to the other. Still cant get mine to read 93c66 chips. Just bought a junkyard cas3 so do this later
Yes ://
Increíble video campeón 👏 💪🏼 un saludo estoy aprendiendo en la base de bmw y me has ayudado muchísimo y veo que estas atento a lps textos aún que ya tienes experiencia gracias un 🤗
Excelente video! La llave debe
Ser original o puede ser aftermarket para AKL?
Puede ser after market
Thank you so much for your help. This is my second attempt to make a cas3+ istap on bench and during the process it reads chip but once I'm going to load data shows a message: error code 4096. I'm doing everything right but I just can't make
Hello 👋🏽 friend! Thanks for watching, please don't forget to become a member of our channel to prioritize your comments! Thank you 🙏🏼❤️
Hey I have same problem did you figure out how to do it?
ME TOO!!!!! Someone call me about it?
@@abeabe3081 Me too, like RIGHT NOW Lol. Did you figure it out?
@@JamesValentineBaja1000 I found out that there is no way you can do it with out the DMI number which I did not do
Hi
i did a case3+just like you do in the video but Still don’t work
Try coding the key to the same immo data on the vehicle
Muy buen video
Una pregunta si mi intencion es cambiar el cas module lo puedo acer en el carro o tambien lo tengo que quitar y solar?
Gracias
Buen video amigo.. una pregunta en este modelo el ISN # no es necesario????
Aveces si!
Cuando haces ese proceso en automático queda el chip y el control para los seguros eléctricos de una x5 2007 case 3
Bro. I need to replace the CAS3, can I just clone eeprom/flash the same way? Awesome video.
Buenas, gran aporte el suyo señor. Quería hacer una consulta, quiero programar una llave a un Mini cas3++ y cuando lo hago por OBD luego de programar aparece todo en F, es como si no la grabará. Si edito la llavey colocó el ID, el mando funciona pero la llave no arranca el auto. Alguna ayuda? Gracias
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
@@MYKEYSAUTOMOTIVE hecho!! muchas gracias y aguardo repuestas! abrazoo
I appreciate the fact that you made the video bilingual! Thank you. What is the programmer that you are using? My days of turning wrenches are past but I still perform mods and keys but am very limited on the keys right now due to programmer constraints.
XP400 PRO
He is using the Autel IM 608 pro. It comes with all the adapters you seeing the video. I have that programmer and it works great! A new updated model of this programer is out as well.
I am new .how can I buy this program.and how much . I am form soudia arbia
Hello friend, for all cas3 + is the AKL procedure the same?
Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway!
You can only join From a desktop or a laptop next to the subscribe button.
Thanks!🙏🏼❤️
Hola pregunta
Cuando pongo Reade sale esto
Comunition error programer check the programer connection
Porque 🤷🏻♂️
great work. Seems straight froward process. You remove the board, solder your points, read the file, edit the file (by adding key data) then saving it back to the chip. Soldering takes practice :) Can we not be connected in order to get the diagram from autel? or does it have to be connected somehow in order to get the diagram for solder points??
Yes you can retrieve diagram without connect just need to know the chip name!! You will have to go under programmer bench .. not immo..
awsome! was the cas module annoying to get to?
Not quite
If you have all the right tools...
I've programmed 2 sets of keys (5 total) to cas3+ via key dump. None of the keys work when plugged back into the car. No response from 1st set.of.keys. 2nd set of keys shows the key with a slash through it on the dash. Help?
How to sync the keys?
Does the procedure for AKL change much?
Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway!
You can only join From a desktop or a laptop next to the subscribe button.
Thanks!🙏🏼❤️
Cuando lo haces en bench no tienes que hacer update el cas istap?
No ocupaste el isn?
Si
En el video no muestra aque horas ingresaste el isn
@@danielf1016 lo hice por obd antes de cuitar el cas
Hi, if it is CAS3++ ISTAP ? Write to EEPROM ? Without Downgrade ? Or Not Write ?
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Thanks . Great explanation. Can im608 do this job with subscription expired?
I read and did write eeprom but keys don't work. Do I need to write flash too?
Sometimes it requires you to adjust the key data to the vehicle immo key data
@@MYKEYSAUTOMOTIVE howsoever exactly?
How is possible write/make key by dump Cas3+ without ISN or working key ?
I only respond to members my apologies
I subscribed to your channel
If you can not answer no problem. For descript cas3+ dump you need isn or working key. You read cas3 not cas3 + . or autel can write cas3+ key without descryption
😁😁 originally i read cas 3+ when i connected through obd to read vehicle information..
No friend No. You make cas3 key or you had working key or ISN. Autel can not read isn from ecu or cas3+ by obd . very strange . not possible make cas3+ key using only cas eeprom file. Not real. If I am wrong pls tell me
My friend thank you and dont forget to join our members only for questions! And exclusive insight to our members only community posts!!
Hi bro is this also the same procedure for a bmw istps?
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Tengo un problema con el CAS, quiero comprar en ebay la ecu y cas, con eso ya no será necesario programar cas, cierto?
Nice video, what temp is your solder gun? How did you get it to stick so quickly?
Thank you sir!
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Saludo. Me puede mostrar como conectar los cable al integrado
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
Hey bro I am getting problem File version error![Error Code: 4096]” when trying to load the file it did read the EBROM correctly but can’t load the file please help
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Same issue for me too!!!!!!
saludos carnal oyes entonces en cuales bmw necesitas leer el DNS primero antes de leer el cas3
How many adds you will play before display the video?
Cómo se cuál conector usar para hacer la EEPROM??
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
Did you not need the isn from the ecu
Hello 👋🏽 friend! Thanks for watching, please don't forget to become a member of our channel to prioritize your comments! Thank you 🙏🏼❤️
Exelente y valioza informacion muchas gracias por compartir.
Does this bypass isn? Tried this today and wouldn’t load…. Had to try the 64 times for isn
For priority commenting please join our members only club!
Will remote control work,when adding key on bench???
Yes
Very good vidéo ,but you Can use bouton (one process ) to Make Key and writing a file eprom ,
👍🏻👍🏻👍🏻
Same is with Cas3 ++ (Instap) ?? ?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
I’ve been considering in purchasing a BDM frame bracket with extra probes, maybe you would like to look in to one of those too
I definitely would!! I was looking at magnetic one!!
hola que tal, estan super los videos, el procedimiento es para igual un CAS 4 o cambia, GRACIAS ANTEMANO.
No es necesario leer la flash ?
Si lo qiere hacer por obd si ..
Do i use this process for all keys lost?No need for isn?
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
will key start the car is there anything else to do,
Please join our memes for priority commenting!!
Second is Volvo S40. You ever done add key to that im608 pro..?
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
What Year? I´ve done some old with immobox3, eeprom job!
@@Peter-hc4di 2020 volvo S40
That’s really impressive how easy you can do this😃💪👍👍👏. Could you tell me what else you using to write key via dump on bench??? Because I have autel im 608 too but is not gonna do all cars😏💁♂️. I have key tool max and kess3. But anything else you can recommend for example? Thanks alot for the hard work you shared with us 👏
Mike what year and model was that please can u mentione next time I'll be appreciated.
Yes sir this was a 2011 or 2012 335 I believe!!
Hi, was this cas3+ or cas3++ istap? Thanks
Hello for priority commenting please join our members club!
I can guarantee it wasn't cas3++ istap
Your solder skills are getting good 👍.
Matt thank you brother!
Exelente...Justo Tengo uno cas3 .para pregramar llave.....una pregunta las llaves smart key bmw 2007 525i ...son reutilizables.....gracias de ante ...
¡Hola, saludos! 👋🏽 amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
Yo e tratado de hacer unos y me sale un error code 4096 cuando quiero cargar el archivo a via dump
Puede ser que esta corrompido los datos o talves no se puede .. que programmadora es???
La autel im608
No need to read and update flash? No ISN needed from DME? Everybody says something different. I like your videos. Keep getting BMW X5's with CAS3+ ISTAP. Seems like everyone of them is an N62 DME and I can only get a 4 digit DME number. How is this working without having to write ISN#?
Hello friend! 👋🏽Please join our members club for priority commenting and a chance to win in our monthly giveaway!
You can only join From a desktop or a laptop next to the subscribe button.
Thanks!🙏🏼❤️
Exelente video compañero para lo que tenemos su nivel gracias
Gracias amigo! Bendiciones!!
what happen to ISN number?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Im bout to do a 328i 2007. I assume this will work other then picking the right chip based on my module? If anyone knows please confirm
No tienes un curso en linea como aprender a programar llaves claro de paga?
En linea no todo es en persona estoy en California.. tienes que venir y quedarte una semana!!
will the xp400 work with autel im508? is there a way i can call you and talk?
Im608 pro is better!! Please join our members for priority commenting!! Thank you!!
@@MYKEYSAUTOMOTIVE would like to if i had the money
Sir I make bmw 3 series ECU change how to make
Must transfer ecu data
Hola máster una pregunta hice un cas 3 2007 por banco seguí todos los pasos que hiciste pero solo funcionó el arranque y el control remoto no funcionó utilize 315 como decían los datos del auto al entrar con el scaner me faltó algún paso con el isn o algo?
@Humberto Ramos en la información que me dió im508 en Smart mode decía que lleva 315 mhz
Yo me meto en uhs-hardware.com y miro las llaves y comparo los años !!
Hola saludos 👋🏽 Amigo! para comentar con prioridad, ¡únase a nuestro club de miembros! ¡una vez que se una, también participará para ganar nuestro sorteo mensual! Si desea unirse, puede unirse desde una computadora portátil o computadora al lado del botón de suscripción, ¡verá el botón de unirse! ¡gracias! 🙏🏼❤️
do you use Tango key programmer
I use Autel im608pro
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Mike, as always a great video, your knowledge of Russian was very surprised. Thank you for sharing your knowledge.
Brother thank you ! God bless you!
@@MYKEYSAUTOMOTIVE buenas noches amigo disculpe tengo una pregunta cuando se programa este tipo de llaves queda activo el control Remoto
Me haces recordar a mellow Man ave 😀😁 great vid
😁😁🙏🏼🙏🏼🙏🏼
You are the best 👍. you explain well more than the autel support team
I appreciate that!
@@MYKEYSAUTOMOTIVE your videos encourage me to buy im608 pro
Thank you for the information 🙏🏼 can You Do one of EWS3?
A Bmw E46
Yes
Hello, What you did, didn't start the car! This CAS3+ needs ISN!
Try the 16 keys
Hola mike espero te encuentres bien, sabes que hice ese procedimiento para un 2011 bmw 328i. La 1ra vez no quedó, hice unlock la llave y volví a hacer otra vez todo el procedimiento, para cuando regresé habían cambiado el slot donde entra la llave y la batería estaba mala, entonces puse el cas para atras y se le pasó carga a la.batería del carro, presiono los botones del remote y si funcionan pero al meter la llave al slot no se prende nada en el.tablero ni siquiera el.foco de que es llave mala. Sabes que pudiera ser el.problema?? Por favor
What about this then. Went to a VW Caddy 2005 and plugged in OBD it said before asking for the new key, it said security verification not passed. Autel after asking them replied saying, Dear friend,
Please try path : expert selection > immo4 instrument CAN>Auto detect > to try to read anti-theft data.
Thanks for choosing Autel products!
Whats your thoughts...?
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
Does the Cas 2 gives the key code also for the emergency key?
It has before but i have never been successful in cutting
It.. its like
Incorrect or maybe im doing something wrong..
@@MYKEYSAUTOMOTIVE you get true the obd2 with a scan tool right?
bro your videos are amazing top marks keep up the good work
Thanks, will do!
Nice advice but u have to choose which language are u going to explain either English or Spanish both languages make us a bit confused
hello friend! please make sure you join our members club for priority commenting! you can join from a desktop or laptop next to the subscribe button you will see the join button! thank you 🙏🏼🙏🏼❤️❤️
Отличная работа, спасибо!
большое спасибо 🙏🏼🙏🏼🙏🏼
very well explained. thank you
Thank you!!🙏🏼🙏🏼🙏🏼
Nice video, thanks 💪......now i need $$$ to buy the tools because the local shop can't add my new key to my e60 😢
Sorry to hear that
@@MYKEYSAUTOMOTIVE I found finally someone , unexpected it was a woman at a small small key shop who did it , she had an Autel 💪.....my car has cas3+
Did you copy the same file to the chip???
FOR PRIORITY COMMENTING PLEASE JOIN OUR MEMBERS CLUB! THANK YOU!
Спасибо Омиго! Мы в России смотрим тебя!👍👍👍
can i do this with my propad3? do they have that attachment cable?
I only reply to members my apologies
Mike They just can't be you I've saved this great vid thanking you so so much.
Brother thank you God bless you always dashty!!
Wow. Great work. That is a lot of procedures to learn
Bossman Thank you brother!!
How do I become a member?
From a desk top or laptop next to the subscribe button!!
Como te puedo contactar amigo ?
Una ves realiza la escritura del nuevo archivo con la nueva llave programada en el Cas3+. , se debe hacer algo más? Por qué al montar el Cas3 al vehículo el scanner Autel reconoce la llave agregada pero el vehículo no la reconoce. Esa es mi duda
Very well explained thank you dear
Thank you im glad you liked it!! God bless!
Sir i am new are you help.how can i start this . How and where i buy this
Uhs
Es istap?
Yess
Sometimes you don't have to write it back,it might corrupt your Cas
Thank you for sharing
Good job Mike I did it and it was not easy.
Thank you brother!!
Why not easy? Is there any different
Great info here, Thanks for sharing Bro👍
Stay Safe👍
Thank you my brother God bless you!
Your video just helped me a lot
Thank you Dashty! Appreciate you!
Experience diagnosis. Tec. Nice video saludes noel matute
Greetings!Thank you my brother!
Damn you are cool man!!!!You started with speaking russian)))Looking all your videos very helpfull,thamks a lot bro!!!!Keep doing !!!!
Thank you my brother! God bless you!!
No need isn number?
Is it possible to clone a CAS3 module the same way?
Can this be done on PC version ?
Yes
Wad this all keys lost mike?
Yes sir!!
Like seriously this is masterclass,
Bro please help me with data to clone the exam cas in the video, mine is unreadable. Or if you can assist me with a link which can lead me to the download cas data download Web please please
Not to bad. Very straight forward.
Brother thank you
This way you ,ade it look so 3asy ,man you're great
Excelente...
thank you!