You represent Autel better than the company itself. Thank you for everything you do for us and explain in detail in each of your videos. God bless you king
Great video man! Thank you for the info. I been doing automotive for about 10 months and I'm starting to practice soldering so I can use my IM608 to its full potential.
Se te agradece mucho compañero. Tengo IM608 PRO tuve necesidad de programar llave vía eeprom memoria 96LC66. me sirvió tu video. Muy bien explicado gracias.
Well done. Thank you for a through explanation. You might look into getting a solder sucker to pull the molten solder out of the holes. They also have a desolder ribbon that can be used to cleanup the old solder. These will make your live easier when replacing the chip.
Muy Valiosa Información. Gracias por tomar tu tiempo para compartir ese tipo de procesos. poquito miedo para desoldar las EEPROM. pero lo demás muy bueno Dios te Bendiga.
Tell Autel and xtool they owe you money, its because of your channel. I have a im608 and a x100 xpad 3 now. You convinced me and you have to be the best automotive locksmith on the net.
Thanks for this video! I have the autel I’m608 but I’m very new to eeprom (never have done one or seen such an in depth video. After a couple more of these types of videos I may be willing to give it a shot of my own! Thanks again for the lesson bro!
Bro you came a long way! Glad to see these videos getting better and better. And the member gig is awesome; you have to the community so it’s only right that the community gives you back. Thanks bro!
Hey están muy interesantes tus vídeos gracias x compartir este tipo de información q Dios te bendiga y q sigas compartiendo más vídeos d este tipo gracias
Thank you for great videos. Only watched a few of your videos. Just was wondering if this process is better than a reflash (with ez-flasher) or is the same outcome, I’ve never done it by removing chip. It seems more chance of something going wrong with removing chip. Thanks again for info
This method will work great for those Toyota’s that have a broken key-in ignition switch or broken door ajar switch since those two inputs are often required for adding keys. I ended up cloning a master key on one the other day because the customer didn’t want to fix the key-in ignition detection issue.
Gracias por los video ..estamos aprendiendo ...pregunto ..este mismo prosediminto de copiar la memoria eepron con el im608 ..funsiona para todos los Toyota ...por ejemplo el Yaris 2015 en adelante...le agradesco mucho por la informacion
Hey bro little tip one thing I learned over time of soldering devices like computers phones power supplys anything with a pcb/motherboard don't use metal to touch components especially foil paper your bound to short a component even if it's not connected to a power & ground. Most likely it will have a capacitor(s) & they sometimes hold a charge for a while depending how big they are.
Have you had much success using the clamp on the chip instead of removing chip from the circuit board?Or is it too hit and miss so you now remove chips all the time to read them?Thanks.
Well done walk through! I do not speak Spanish but I would prefer one language or the other because as a tech I hear German as well as Spanish so it’s like hearing everything twice! ;) I speak only English, but can understand technical German , French and Spanish… thank you for doing this video!
Thank you explain the process better than autel. I hope you wouldn't mind me giving you a tip. Desolder using a wick. Clean the holes and solder the chip back.
Hello greetings 👋🏽 friend! For priority commenting, join our member club! once you join, you'll also be entered to win our monthly giveaway! If you want to join you can join from a laptop or computer next to the subscribe button you will see the join button! Thank you! 🙏🏼❤️
when you are picking out which chip to select on the im608 how do you know the chip is a microchip to select? where can i find this info for other chips? i have just been pressing every button until it comes up? thanks mike.
Hello here from LA just finding out how to make keys but, bro you are maestro 🙏 gracias! Specially for the autel videos. How can we repay your time brother. I Appreciate you!
Thank you sir! I appreciate your nice comment! You can always chose to donate to our channel or join our members club aswell!! For more info click on the video description!🙏🏼🙏🏼❤️❤️
On sequoia 2003 is it possible for some of them to use 4C chip (2002) instead of toy44D67 ? I'm on a job where the security light goes off but there is some other issue and no start. The error code says u2101 so I'm thinking possibly the earlier chip. Thanks
Great video. My biggest question is knowing which vehicles you can use which functions on? Do you know of a list or partial list of which 608 features you can use on which vehicles? Thanks in advance!
love your videos, you have helped me many times. I have a fully updated im508 with the xp400 but when I go to write key via dump it doesn’t show an option for Toyota. Is this only an option on im608??
excelentes videos, Quiero saber si no lee el chip (dañado), puedo usar una usada para programar las llaves o es necesario una nueva. gracias por compartir tus conocimientos exitos
For soldering there is a special tape that negates the heat and its not sticky when taking it off Aye un typo de cinta que cancela el calor y no deja pegamento quando lo quitas
Absolutely perfect video! I only have one question. Would the ribbon cable and chip clip that comes with the XP400 not work to accomplish this procedure?
Not sure tbh bad grounded wire?? Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Do you mind explaining why it was done this way? Is there no bi directional scanner that would have been able to communicate with the immobilizer directly to write new key info?
No. There is no way to access the processor via OBD. Toyota designed it that way. They wanted the dealers to replace the module, ensuring security. NOT!!! Ensuring $$$!
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
i have 2014 vw jetta 1.8L push start button i bought from the auction wrecked it came with one key but does not run and its showing no keys on the system try to add a key with my Autel im508 xp400pro once the procces almost done on last thing fail learning key any suggusting
Are you using Fahrenheit or Celsius? Solder station seems to be Celsius, you said 300 Fahrenheit but it's only about 143 Celsius, if it's 300 Fahrenheit this will work only for hot air? If i use my solder iron at 300F(143celsius) i don't reach melting point.
You need to sync the immo ecu to the vehicle!! First you learn the keys to the vehicle after you insert each key you have to turn off the programming mode from off to on 5 times make sure the immo light turns off .. after close learning mode you must insert the learned key turn ignition on but engine stays off .. and jump obd terminal 4 and 13 for 30 minutes then remove and turn off ignition then turn on vehicle!
Love all you’re videos and all the tips you provide. Question could you have programmed that key by using ez-flash or the auto pro pad? Then programming 3 keys?
Hello Mike. First of all, Great Video!! I followed it exactly with the same equipment. Keys don't work though. Only difference I should mention is that I read the eeprom with the XP200 but wrote back to it with the XP400 pro. Can you help me?
The pic u have in ur title where can u get that eeprom clamp….also had another question if I grab an immobilizer ecu from the junkyard get everything ready for the next AKL on a 03-07 sequoia program the keys and just do the cuts to the vehicle will it work that way I’m not messing with the chip in the field?
Hello greetings member! That is called a pamona 5250 test clip! Havnt go it to work properly yet with the im608 pro could be a grounding issue.. and yes all you have to do is do the 30 min sync to the vehicle where u stick a paper clip or wire in 4 & 13 pin on the obd
@@MYKEYSAUTOMOTIVE ok so I can grab a immo box from the junkyard do this process u did add the keys and the next AKL remove the original immo box install my junkyard one cut the program key and do the 30 min sync…..if u get the clip to work post a video
My friend very good videos & Ives watched many of yours. I have the IM508 & in the menu options I swipe right to left BUT I see you swipe up & down. Where in the menu can this be changed. Many thanks
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Авто/Мото
You represent Autel better than the company itself. Thank you for everything you do for us and explain in detail in each of your videos. God bless you king
Thank you sir!
Great video man! Thank you for the info. I been doing automotive for about 10 months and I'm starting to practice soldering so I can use my IM608 to its full potential.
Tha k you for watching!
Really do appreciate your videos. Because I'm just getting into key programming. There isn't alot of videos out there that go into detail as you do.
Thank you for watching ,glad you like them!
Se te agradece mucho compañero. Tengo IM608 PRO tuve necesidad de programar llave vía eeprom memoria 96LC66. me sirvió tu video. Muy bien explicado gracias.
Gracias amigo ! Bendiciones!
Well done. Thank you for a through explanation. You might look into getting a solder sucker to pull the molten solder out of the holes. They also have a desolder ribbon that can be used to cleanup the old solder. These will make your live easier when replacing the chip.
Muy Valiosa Información. Gracias por tomar tu tiempo para compartir ese tipo de procesos. poquito miedo para desoldar las EEPROM. pero lo demás muy bueno Dios te Bendiga.
Gracias amigo! Dios te bendiga!
Another brilliant demonstration MIKE. Staying awake just to watch your videos here in Australia
Thank you for the support brother!! Blessings to you!
Tell Autel and xtool they owe you money, its because of your channel. I have a im608 and a x100 xpad 3 now. You convinced me and you have to be the best automotive locksmith on the net.
Hahha 😅😅😅 i love those programmers !! Thank you brother God bless you im glad you like my channel!!
very in depth video have be shying away from stuff like this but now i am willing to give it a shot thanks you much
i thought this exact same thing, i thought it would work!! they sell heat tape that works great for this, and some flux good to go, awesome job man
Buen trabajo amigo! Muchas gracias por compartir. Que continúen tus éxitos
Gracias a ti amigo!
Excellent! I would personally work from the back side of device since this is not an SMD device but Bravo!!
You are correct, except this is not "Bravo" , it is 100% incorrect way to do it!
Very good you xplain the Thing in easy way that makes every one understanding wat you Do thank you.
Thank you for watching!
Great video. mucgas gracias por compartir tan valiosa ayuda a los que comenzamos en esto.
Gracias a ti amigo bendiciones!!
Thanks for this video! I have the autel I’m608 but I’m very new to eeprom (never have done one or seen such an in depth video. After a couple more of these types of videos I may be willing to give it a shot of my own! Thanks again for the lesson bro!
Thank you for watching
Another great video Mike thanks again for taking the time to make bilingual and then sharing!
Sir thank you for watching! Glad u liked it!!
Bro you came a long way! Glad to see these videos getting better and better. And the member gig is awesome; you have to the community so it’s only right that the community gives you back. Thanks bro!
Brother thank you God bless you!
Saludos de Lima Perú muy buena explicación maestro 👍👍👍👍
Hola saludos amigo!!
Hey están muy interesantes tus vídeos gracias x compartir este tipo de información q Dios te bendiga y q sigas compartiendo más vídeos d este tipo gracias
Gracias amigo dios te bediga!
Thank you for great videos. Only watched a few of your videos. Just was wondering if this process is better than a reflash (with ez-flasher) or is the same outcome, I’ve never done it by removing chip. It seems more chance of something going wrong with removing chip. Thanks again for info
This method will work great for those Toyota’s that have a broken key-in ignition switch or broken door ajar switch since those two inputs are often required for adding keys.
I ended up cloning a master key on one the other day because the customer didn’t want to fix the key-in ignition detection issue.
❤️❤️
hi . i am Mo from south Africa , thank you for the video, learning a lot on this video and I'm new to all this in the business, god bless brother
Thank you for watching God bless!!
@@MYKEYSAUTOMOTIVE Yes I want to God bless you both too.
Your the best mike
Gracias mike buen video
Gracias amigo!!
Muchísimas gracias por compartir hermano, muchos abrazos
Gracias a ti y Dios te bendiga!❤️🙏🏼
Gracias a ti y Dios te bendiga!❤️🙏🏼
Amazing guide! Waiting Bmw and Mercedes work aswell. Thank you so much
thank you!!
Muy buen trabajo amigo!. Gracias por el doble idioma, se agradece mucho!. Saludos.
Gracias a ti dios te bendiga!!
buenisimo el video gracias por compartir🙂
Gracias manny!
Wow muy buen video amigo ! Gracias !
Este proceso lo puedes hacer con tu Pad3+kc501?
Good miło się ogląda :)
🙏🏼🙏🏼❤️❤️❤️ thank you
Gracias por los video ..estamos aprendiendo ...pregunto ..este mismo prosediminto de copiar la memoria eepron con el im608 ..funsiona para todos los Toyota ...por ejemplo el Yaris 2015 en adelante...le agradesco mucho por la informacion
Compadre más videos están muy bien explicador muchas gracias
Gracias a ti amigo! Bendiciones!🙏🏼🙏🏼❤️❤️
Many many many thanks Mike, it's a very informative video, keep up the good work and waiting for more eeprom jobs through IM608.
Thanks again
Thank u brother God bless you🙏🏼🙏🏼❤️❤️❤️
Hey bro little tip one thing I learned over time of soldering devices like computers phones power supplys anything with a pcb/motherboard don't use metal to touch components especially foil paper your bound to short a component even if it's not connected to a power & ground. Most likely it will have a capacitor(s) & they sometimes hold a charge for a while depending how big they are.
Thank you for sharing that information with us Moises! Much appreciated!
My Keys Automotive / Key God.Thank you for sharing 👏👏👏
Have you had much success using the clamp on the chip instead of removing chip from the circuit board?Or is it too hit and miss so you now remove chips all the time to read them?Thanks.
Great video as always Mike
Thank you Mark!
Thanks for the education
Thank you for watching
thanks for this bromigo!
What happens when I choose the unused key. Will it still work?
Excelente trabajo solo una duda siempre se tienen q registrar 2 llaves?
Thanks again and again I really appreciate it.
Thank you brother !
Well done walk through! I do not speak Spanish but I would prefer one language or the other because as a tech I hear German as well as Spanish so it’s like hearing everything twice! ;) I speak only English, but can understand technical German , French and Spanish… thank you for doing this video!
Pregunta ?
Para agregar llave extra también se tiene que hacer este procedimiento?
Wonderful video, you're a great teacher thanks so much 👍 😊
Why do you have to desolder the whole chip?? You just use the provided clips? Is there something on the board that messes up the readwrite process?
I'm looking to remove crash data on airbag modules do you know if autel carry anything for that?
you're the best teacher, thanks alot
You are welcome!
Thanks so much for the education
Our pleasure!
You are a wise man sir 🙏
Thank you sir God bless you!
@@MYKEYSAUTOMOTIVE thank you so much sir
No problem
this tool can be used for EPROM (XICOR, X28HC64P-12, CB9849) to read, erase and write?
Привет Вам из России! Делаю при помощи устройства для удаления припоя, а потом нагрев феном , так легче отходят. Успехов в работе , классное видео!!!
Great video thank you
Thank you brother God bless you!
Thank you fur a good video😊
Thank you for watching!
Thank you explain the process better than autel. I hope you wouldn't mind me giving you a tip. Desolder using a wick. Clean the holes and solder the chip back.
Thank you for the tip! Highly appreciated!!
I like ur the way u explain
Then on my toll I can't see (Right key via dump) what myb b a problem
thank you sir!
Hello greetings 👋🏽 friend! For priority commenting, join our member club! once you join, you'll also be entered to win our monthly giveaway! If you want to join you can join from a laptop or computer next to the subscribe button you will see the join button! Thank you! 🙏🏼❤️
GRACIAS HERMANO ECCELENTE VIDEO QUE PROGRAMA UTILISAS PARA GENERAL CLEAN CODIGOS EN LAS SRS EEPROM ?
Amigo muchas graciaspor la información..pregunta. Esa programación puede hacerce sin sacar la eeprom también??..
Buenas tardes tus videos aprendo mucho puedes gracias
Gracias amigo
Bro puedo tomar unas clases contigo vivo en área Los Ángeles
Mandame un email porfavor mykeysautomotive@gmail.com
Muy buen video 👍 👌
Gracias amigo!
when you are picking out which chip to select on the im608 how do you know the chip is a microchip to select? where can i find this info for other chips? i have just been pressing every button until it comes up? thanks mike.
Hey Matt ! Same here!! Just by trial and error doesnt really tell you wich one to select, i had to figure out
On my own!
Hello here from LA just finding out how to make keys but, bro you are maestro 🙏 gracias! Specially for the autel videos. How can we repay your time brother. I Appreciate you!
Thank you sir! I appreciate your nice comment! You can always chose to donate to our channel or join our members club aswell!! For more info click on the video description!🙏🏼🙏🏼❤️❤️
Buen dia, es el mismo procesos para una toyota 4runner 99?
Su Lengua Y su Lecion es muy muy bien ! I wish I could give 5 * thumbs up. 👍👍👍👍👍👍
Thank you bro !! God bless!!🙏🏼🙏🏼❤️❤️
On sequoia 2003 is it possible for some of them to use 4C chip (2002) instead of toy44D67 ? I'm on a job where the security light goes off but there is some other issue and no start. The error code says u2101 so I'm thinking possibly the earlier chip. Thanks
Great video. My biggest question is knowing which vehicles you can use which functions on? Do you know of a list or partial list of which 608 features you can use on which vehicles? Thanks in advance!
Here a list of the vehicle coverage list
www.autel.com/vehicle-coverage/coverage2
Please tell me,how I can find chip number,does chip number 93LC66A its on the chip?Great video thank you for sharing!
love your videos, you have helped me many times. I have a fully updated im508 with the xp400 but when I go to write key via dump it doesn’t show an option for Toyota. Is this only an option on im608??
Kind of a dumb question I got, but have you updated your Toyota software completely on the Autel?
awesome job bro
Thank you, gracias
Thank you too!
Muy buen video, muchas gracias, sabrás donde está localizado el código de corte de la llave en una Nissan Titán 2006?
Si no estás suscrito no obtienes respuesta a tus dudas 😁
Whats hapeen if previous person melt lottle bit of chip numbers? How i can then know this.
This is the only way you can make keys for this vehicle. Is there other options or just this one way
Excellent video!!!
Glad you liked it!
thank you great vedio
Thank you brother!
Usa flux y va a hacer que el estaño se funda mas rápido y así no recalientas la placa
Gracias amigo!
excelentes videos, Quiero saber si no lee el chip (dañado), puedo usar una usada para programar las llaves o es necesario una nueva. gracias por compartir tus conocimientos exitos
Hola 👋🏽 amigo! ¡Gracias por mirar, por favor no olvide convertirse en miembro de nuestro canal para comentar con prioridad! Gracias 🙏🏼❤️
For soldering there is a special tape that negates the heat and its not sticky when taking it off
Aye un typo de cinta que cancela el calor y no deja pegamento quando lo quitas
Thank you Juan
Absolutely perfect video! I only have one question. Would the ribbon cable and chip clip that comes with the XP400 not work to accomplish this procedure?
It hasnt worked for me yet maybe its not grounded right .. but its not able to read when chip
Is soldered on..
I have found it more easier to use the mini prog pen by xhorse
Just read data and make key and write back data no soldering needed
Cant dip8 clip cable read the chip instead of removing the chip?
Great video as usual, I have a question tho: why we can’t use the 8 pin clip to read data instead of removing the chip off the circuit board?
Not sure tbh bad grounded wire??
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
God bless you bro.
Thank you brother God bless!
Do you mind explaining why it was done this way? Is there no bi directional scanner that would have been able to communicate with the immobilizer directly to write new key info?
No. There is no way to access the processor via OBD. Toyota designed it that way. They wanted the dealers to replace the module, ensuring security. NOT!!! Ensuring $$$!
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Yes thank you for explaining to him!
Good stuff, thanks! Is there a reason you removed the eeprom vs just using a ribbon cable with a clamp to read and write it?
yes its not possible with the clamp yet
i have 2014 vw jetta 1.8L push start button i bought from the auction wrecked it came with one key but does not run and its showing no keys on the system try to add a key with my Autel im508 xp400pro once the procces almost done on last thing fail learning key any suggusting
Try checking battery .. also buy a new key and try programming
We have to dissolder the chip for that on 4c or can read when its on the board?
Desoldering for now... unless you have the autopropad fulll version with clip and programmer
Are you using Fahrenheit or Celsius? Solder station seems to be Celsius, you said 300 Fahrenheit but it's only about 143 Celsius, if it's 300 Fahrenheit this will work only for hot air? If i use my solder iron at 300F(143celsius) i don't reach melting point.
So are you using Fahrenheit or Celsius?
Cómo saber que vehículos llevan eepron y cuáles no?
great videos really help full , what would be the cost for that job?
Once I reflash a ECU immobilizer for a 2003 Sequoia, What do I need to do to make it compatible to the vehicle it is being installed on?
You need to sync the immo ecu to the vehicle!! First you learn the keys to the vehicle after you insert each key you have to turn off the programming mode from off to on 5 times make sure the immo light turns off .. after close learning mode you must insert the learned key turn ignition on but engine stays off .. and jump obd terminal 4 and 13 for 30 minutes then remove and turn off ignition then turn on vehicle!
En algunos vehículos es más fácil reprogramar llave, pero en otros es un pedo.. buen trabajó...
SI ASI ES!GRACIAS AMIGO!
hey Mikey...possible to do this via clamp without desoldering? looks like it requires a bigger clamp though than the one that came with xp400pro.
i tried it and the clip doesnt ground correctly you cant really read the data on the chip unless you disolder and remover it! :{
Thank you bro
No problem thank you
@@MYKEYSAUTOMOTIVE how to join you club
Love all you’re videos and all the tips you provide. Question could you have programmed that key by using ez-flash or the auto pro pad? Then programming 3 keys?
Yes you can use ez flash!!
Hello Mike. First of all, Great Video!! I followed it exactly with the same equipment. Keys don't work though. Only difference I should mention is that I read the eeprom with the XP200 but wrote back to it with the XP400 pro. Can you help me?
ok try going through immo and select the vehicles there should be another option under immo
The pic u have in ur title where can u get that eeprom clamp….also had another question if I grab an immobilizer ecu from the junkyard get everything ready for the next AKL on a 03-07 sequoia program the keys and just do the cuts to the vehicle will it work that way I’m not messing with the chip in the field?
Hello greetings member! That is called a pamona 5250 test clip! Havnt go it to work properly yet with the im608 pro could be a grounding issue.. and yes all you have to do is do the 30 min sync to the vehicle where u stick a paper clip or wire in 4 & 13 pin on the obd
@@MYKEYSAUTOMOTIVE ok so I can grab a immo box from the junkyard do this process u did add the keys and the next AKL remove the original immo box install my junkyard one cut the program key and do the 30 min sync…..if u get the clip to work post a video
Why did you write the dumb file on the chip again? The 2 keys you made have the same info from the chip!
Thank you for the video
My friend very good videos & Ives watched many of yours.
I have the IM508 & in the menu options I swipe right to left BUT I see you swipe up & down. Where in the menu can this be changed. Many thanks
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
Where is the ECU module located at on this vehicle? behind glove box or behind instrument cluster?
The main vehicle ecu is located behind the glove box but you need the immo ecu module and thats located behind the cluster.
How do you determine what chip has the info you need? Do you have to look through the list of chip numbers?
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Thanks for the video. I'm looking to read F7343Q, but i couldn't find it in Autel. Any information is helpful
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
wow supper video. very nice. thank you