I have to chime in here. You are literally the only one on RUclips that actually talks directly about whatever the title of the video is. Thank , thank you, thank you! You are informative, to the point without all the extraneous blah, blah, blah that quite simply just wastes everyone's time. Love your videos! Keep up the great work.
How refreshing it is to have a youtuber not blab on and on about unnecessary things. You get right to the point and explain things so very well! Thanks for putting out great content. Very helpful.
Thank you so much for this video! I just ordered the Maker 3 which should arrive during the week of August 12, 2024. I’m completely new to Cricut products and was always unclear how a machine so small could do anything so substantial as the projects demonstrated in your video. You have a new subscriber! Thank you so much for the very thoughtful and thorough video!!!!’
I literally just bought the Maker 3 for myself, having never purchased any of the Cricut products I am confident I will be pleased. I’m so excited!! Thank you for explaining what products I need to also purchase.
Would be happy BUT Cricut truly needs to Solve Their Horrible Software Issues Including several upgrades as to being able to do several task including being able to actually create our own designs with ease. We would be happy to buy many of cricut designs. Cricut software is in need of major updates that will win many of us over... thank you love all your videos!
Hello ... I want to make textile patterns to design t-shirts or sweatshirts ... but obviously I need to be able to use the rotary blade in a length of 90 cm ... is it possible to configure the cutting area using 30 cm width x 90 cm long and for rotary blade? I know they say you should only use smart material, but what if I glue my fabric on top of the smart material backing ... will you let me use the rotary blade? Has anyone tried? Does the program enable the rotary knife if I choose material without a mat and set an area greater than the 60 cm limit it has? Please someone help me with that ... I urgently need the machine but I don't know if it's worth spending double for the make 3 and I'd better buy the old maker.
I just counted how many times I wished my maker would cut three times faster than it already does and surprisingly the number was... Zero. I see very little advantage for me to have a faster Maker, especially because it appears the three times faster is with Cricut “smart material”, so unless I trade the five or so miles of product I already have in stock, it will still be cutting at the old rate. They ought to have put more time and effort into fixing the issues with Design Space. BUT, kudos to them for their marketing! Good business
my maker is currently sitting in it's box for this reason. I HATE design space. I wonder if these new machines wouldn't cut any vinyl matless though. Like they said you HAD to use their blanks to use infusible ink which is totally not true
@@kellyhayes take it out the box and try alternate software. Inkscape (I find confusing) is free, SCAL 5 is good and Silhouette Studio (need to purchase business edition to save as svgs to use with DS -there is a coupon) is great software. I’ve just started using it and I just save as an svg then import to DS and basically use it to cut as my Maker cuts beautifully so win win 😄 Take it out the box and play 🤞🤞
I was so upset since I bought my Maker 3 months ago. But I can live without these new features. I can see if I was more of a professional needing bigger printing space that would be beneficial, but other than that, I agree, faster is not going to make me have buyer remorse.
@@jilliej7 which machine would be the best? Explorer 3 or the Maker 3. What are the differences other than speed? I bought the new maker but have not open the box yet because I’ve heard so many negative comments and I’m not sure which to buy. I also want to know what are the options for the software. I can’t afford to sign up and pay for software or stock right now…also, are you able to create your own art? I’m not sure what you call it…but I think it’s called art stock…does it come with these machines? Also…why can’t you other brands of material? Thank you!
Thank you for sharing this video. I am brand new to cricut and have just bought the Cricut Maker 3. I still have it boxed up. I have been watching videos on the maker 3 and yours is an excellent video to watch for beginners. Again, thank you very much for your time in explaining the maker 3. Love that it is so fast. Wish me luck when I open and start making things.
Same here just got it yesterday from hubby I was going to hold off and do some research on them but I guess now I can start researching how to use it Lol
Thank you so much for this clear explanation. I just got the 3 with 0 experience with Cricut and your video is the number 5 that I saw and is for sure the best explained one.
Thank you for explaining so clearly the use of the machine. I have had my Maker 3 for a few months and now have some tome to start using it. I look forward to watching more of you videos.
Thank you so much for this video. I have just bought a Cricut Maker 3 and have never used a Cricut machine before! I unboxed my machine whilst watching your video and I am so impressed with how well you have explained everything, thank you. I will subscribe to your channel so that I can get going with my machine even though I’m too scared to use it! ☺️ xXx
Boy am I glad I watched the entire video! I almost dug into my money jar to see if I had enough to buy the new one! but then you mentioned the faster cutting was for “smart material” only and it basically cut the same speed as the Maker on non smart materials! I don’t use Cricut materials so I guess no need to upgrade just yet from my original Maker, thank you for your videos. I always enjoy watching them!
I saw a video where they put a generic vinyl ... with the smart material configuration and it cut it without problems ... it is just a publicity stunt to sell their expensive vinyl, I want to buy 3 because it cuts longer ... I need make patterns for textile design of clothing ... but I don't know if the program allows me to configure; smart material, 90 cm long ... and if you allow me to use the rotary blade.
Thank you, you explained this so well. Believe it or not, this is the 3rd video I watched on the Maker 3 and you were the only one that said the faster cutting speed only worked if you were using smart material. The others only said that it cut faster so I thought everything was cut faster. Great information!!
Just brought the Cricut Make 3 for Christmas early gift from my husband bless him! So this video has been very helpful so thank you for explaining very thing so well!! Subscribed to your Channel...
I was almost worried I invested too early in buying my Maker with this Maker 3 release. Glad to know there aren't any major differences that would effect my work heavily. Super cool features though!
What?? 3 I didn't even know they had a new coming out! My husband just bought me a Circuit maker 😣. But, I do like the idea you don't have to use a mat or cricket marker 3. That's a plus.👏 But, the cutting time.. I did count the seconds and it was only 1mint and 30 seconds faster than cricket maker. 🤔 I don't think I have the need want to upgraded for now, for just 1mints 30sec faster. I think I could wait . Lol Thank for sharing 😁
Don't be disappointed in your purchase. The one you have is a great machine and really not all that different. Unless you want to do really long narrow cuts of up to 20 feet in a continuous amount the machines are not much different. For those who have an Air 2 it will be a big upgrade as they cut even slower than the Maker, but the Air 3 still only cuts 100 materials while both Maker and Maker 3 can cut up to 300 materials, but ONLY the smart vinyl is mat free. everything else including sticker paper, card stock, fabric and all the other 298 materials need a mat.
Your are my favorite RUclipsr when it comes to Cricut. I’ve had a machine for years but was terrified of it. Your videos have got me into it! Even bought the Maker 3 because you’ve got me excited about this machine!
Definitely appreciate this video, I just purchased my Maker 3 yesterday and was curious about the difference. That was a BIG difference. Well explained and to the point. Thank you.
I can't thank you enough for this video. I got a Maker 3 and it came with no manual. I am not a tech savvy person and I have been having the hardest time with a file I bought but I can't get it to be an svg file. I also had no idea there were so many blades. I am going to re-watch this and take notes. I know you can cut wood but I have no idea of the type and thickness. I need a manual that explains all the features and what they can do. Thank you again and this won't be the last time you hear from me. 🤗
Hi Angie👋, I am a newbie CM3 user...I would like to thank you for sharing your knowledge and guidance on using this wonderful machine...confidence built after watching this video...Thank you so much😊❣
Thank you for your time. I just bought the cameo 4 bundle and am perfectly happy with my cricuit maker. Cicut should Fix the software and allow us to write our fonts at any size without the bubble words or hollowing out. Larger cut size area. Thank goodness can save my money.
Thank you so much for showing the differences between the Maker and Maker 3. I just got my Maker so I’m not in the market for a new one yet, but it’s nice to learn about what’s out there. 😊
How lovely to see a comment from someone who isn’t bitter and angry because they’ve just bought a machine and are happy with what they have 😄 enjoy your machine
thank you! this was so helpful!! I am new to cricut, I've been using a scan n cut for years so I am lost!!! my husband bought this for me for my birthday today. I will be watching more of your vids for help with not only using the machine but also design space. He watched several of your videos trying to decide which one to get me. I use these machines a lot with my home business of homecoming mum making. we've also been watching your vids on sublimation for a few months now. always so informative and helpful. Appreciate all the hard work that goes into making these tutorials for us!!!! 💖💖💖
First, love Angie. She’s super smart and explains everything so well. I got the explorer air2 and for the 5 months I had it, I was so frustrated. I had to use a deep cut blade to get maybe half of the cuts come out good, never perfect. I thought it was me. You can imagine how much material I wasted and purchased. I did go and get a Maker 3 because I wanted to do the different things it did. And holy crap, it’s awesome. Problem for me, I couldn’t sell the explorer, I wouldn’t do that to anyone, so I wasted so much $. What makes me a little happy is when I purchase non Cricut brand materials 😏
What brand materials do you use or site do you recommend?? I have my Maker3 still in the box bc I was not sure of everything I needed to get for basic stickers and iron on.. Just bought a few rolls and stopped there and grabbed a weeding tool set..need to get transfer tape lol
Just bought the Maker 3. This is the best starter video on RUclips; I've watched MANY. The natural progression to features is perfect. Just when I'm wondering something, you start to cover it. Suscribed.
There are a few negative responses, and I get that... But I am excited. I am going from the Explore (no numbers) to this new Maker 3, so I think I will find a huge difference!
New products like this make me want to wait before I get excited or think about buying them. I prefer to have the 'Woo-Hoo first day!"-ers be the mass beta testers so the bugs can be worked out. It also allows the off brands time to create compatible vinyl MUCH cheaper.
You always make the best explanatory video’s! Thank you! Could you do a video on fonts that explains the difference between single layer an$ multi layer fonts and when you want the different types of fonts. I get hung up trying to find the right font for doing the mugs and other materials because of this.
Just brought the Cricut maker 3 and just took it out of the box, put my laptop on to see video's on how to use this machine, I have a Pazzles which no longer works that good anymore, it is a good few years old mind you, so I am so excited to try this new Cricut maker 3, thank you as you give very clear instructions!!! will check out more of your video's on the Cricut maker 3. Thank you for Sharing!!! Just subscribed to your channel...
I think I'd need more of a difference to spark me to upgrade. I love the Maker and it has all the functions I need. It does seem that you would be locked into Cricut materials to really benefit from the improvements (It would be nice if Cricut provided a little more free access to their design content) Well presented and a great, balanced comparison between the two.
Just pulled my new Maker 3 out of the box and headed over to your RUclips site as I knew you would have a wonderful video on how to set it up and use the machine. I love your site and it is the first place I turn to when I need to know how to do something. Thanks so much!!
Thanks so much ! This video was awesome and very informative! I just ordered a cricut maker 3 and a press machine. Looking forward to try out and make new items for my business.
Got the Maker 3 for Christmas. Only had the Joy before and it helped out a lot but now I need to see how to work this CM3 and find out what this baby can do! Thanks for taking the time to upload vid...
I am with most everyone else in wishing Cricut would work on Design Space functions and enlarging the print then cut. Also, I ran out and bought the Joy because I thought the smart material would be a bonus, but alas, I don't ever use my Joy unless I want to make a quick card! So much money wasted! I love my Maker and will stick with it. (I still haven't paid off the mug press! Which I love!) Thank you Angie.
I was so irritated that I waited 2 hours for Cricut to go Live to announce the new machines, that I literally commented, “I waited for this?!” and logged off. 😂 I literally just bought my Maker last month so I couldn’t care less about new bells and whistles, but I am confused as to the necessity of a new machine since they marketed the Maker as the one that Cricut would simply add to and enhance so no other machine would ever be necessary again. Wish they’d tweak their software and just focus on creating more quick-swap tips. Maybe work on making tshirt blanks that weren’t garbage would be beneficial as well.
@@Mamajo864 I feel the same way! I bought the machine in December for my business and it’s been a nightmare to use so I barely use it these days. The software is atrocious unless you’re doing a simple cut. What’s the purpose of having a flat option if it takes 2 hours to read before it moves to the next step. So disappointed with this greedy company.
I am learning Silhouette for this reason. Many people design in it then cut with Cricut. It's free and you can upgrade for a one time fee. No monthly membership.
Thank you so much for making this video. I had a cricket 10 years ago that got broken at my husbands shop. I am now starting a country art and decor business so I am needed a new cricket to aid with my designs. I have never used design space and was looking for a video that would tell me how large of letters I would be able to make. Your video was so informative and you answered all the questions I had.
Thank you. The cricut maker 3 is my first time purchasing a cricut and I have no knowledge so I set mine up as you did yours. I appreciate you taking the time and explaining and demonstrating
Thank you for explaining everything so well and adding in all things we needed to know very helpful! Watched more than one video this one is hands down the best explained
I’m happy for CRICUT, I can hardly wait to purchase one, it’s so fast. However, I’m hoping they’ll fix their print and cut size. I was speaking to a rep who was helping me fix an error message that kept coming up and I asked him if they were ever going to fix the print and cut size and he said he was sure it was in the making.
I make large wood signs for a living and I use a silhouette cameo 4 for that because I can cut stencil vinyl I buy off of Amazon that’s a fraction of the cost and I can cut without a mat. I wish Cricut would have came up with a machine that did what silhouette cameo 4 does with using your own materials. Cricut is being greedy with having everyone need to use the smart vinyl. Costs too much. Great video explaining everything though. I’ll stick to my silhouette cameo 4 for my business
This is off topic and I apologize for that. However, if you are doing stencils you should look into Ikonart. It is a way to make reusable stencils. No more wasted vinyl.
I just got a maker...hmm~ NOW 3?... Seems like just "faster cutting?".... Slow cutting~ It does not bother me so. I am O~~~K for now. haha Thanks for the video ^^
Yes I just got mine two last week. It doesn't look that it functions much differently but faster. I really don't have a need to cut out 12 feet of material. So, I'll stick with mine.
I just bought a Maker 3 today. I brought it home, and I could not open Clamp B! I drove back to Michael’s, and a representative opened the clamp. She had to struggle a little but could open and close it. In front of her, I tried to open clamp B. It took two or three times for me to feel comfortable LIFTING and PULLING on the clamp opener😅.
Thank you so much for taking time out to explain some items on the cricut maker 3.. i just purchased mine on amazon got it bout 2 days ago still in the box i just want to learn as much as i can before i open it .. i already own the original cricut that came out bout 20 yrs ago .. i used it here and there .. but now i finally have free time ( my son is an adult now) i have more time for myself...
I love your videos, and they usually help me make decisions. This one is skewed though to be more accurate and really help us, the test should of been run with both of them using a mat. We already knew from what cricut has said that the smart materials cut fast, I would like to see how they stack up against each other with mats and like materials. Any chance you will be doing that? Keep up the good work, I enjoy watching your channel.
Thanks for the video, but what a pleasant disappointment the Maker 3 is. I purchased my maker earlier this year and was worried that I should have waited for the maker 3. Please correct me if I’m wrong, even with the smart material, I can’t cut anything wider than I can cut now with my maker (eg material is 13 inches wide but still cuts within the 12 inch parameter) - just longer, but what a waste of smart material to not be able to take advantage of the extra inches in width gained from not needing a mat. No extra speed when cutting with the regular materials...I agree with many other comments, the better effort would be in upgrading Design space and expanding the size limits for print then cut, etc!
Ohh I was so excited when I heard that a new Cricut Maker 3 came out...and is cutting 2xtimes faster.... but since it only does that with smart materials...I don’t see the added benefit to be completely honest. A real added benefit would have been if it would have done the same with all materials.
😔 i justtttt bought the maker for my birthday and received it few days back. Would love to have an updated maker, although the most significant differences between the 2 makers are the smart materials (ie using without a mat) and also a faster cutting time. Sigh… hope that there won’t be any more differences in the future. Anyways, sending love from Singapore! Loving your videos as they are compact with information! Thank you for sharing
Wonderful information. I am ready to order a Cricut Maker 3 but I am looking around for videos to be sure I "need" it. This will be my 4th Cricut. I began in the very beginning with cartridges, no computer interface, and nothing online. Wow! That was a LONG time ago. Subscribing and going back to see more of your videos.
I still have the original with cartridges as well trying to decide if I need the 3 or not? I mostly scrap book not into all the other stuff.I am over the whole cartridges thing
Yeah I agree with that, especially since it comes with no mats. I just upgraded from a cricut joy, to a maker ( not a maker 3, just the maker). The maker was $200 off its original price so I couldn't help myself. lol. But, I'm kinda glad I brought the Maker for now and not the Maker 3 in the end.
Thank you so much, After watching so many videos and getting confused, finally I found you. So I will be more confident to use my maker 3, I never had one Cricut before. 🌹
Hi, thanks for your video ! I am going to go purchase a cricut maker 3 tomorrow and I am new to the whole thing I want to be completely setup from the get go, what are the number 1 tools and accessories I need to add into my cart when I go and pick this up please :)
Is there a cricut machine that cuts bigger print then cut than 9.25 x 6.75? Or is the cameo 4 the o my one that can do that without slicing or any hacks in the cricut?
True, this “announcement” was nothing short of a disappointment. Didn’t even make me raise an eyebrow (most likely because I was too busy rolling my eyes🙄😂)!
I haven't even opened mine out of the box yet because I'm scared lol. I've never used one and don't know much about them but I'm so glad I found your channel because I've learned so much today lol
@@Bre_Creatively well I got it out the box lol I've done quite a few projects with it. I'm still getting the hang of it. There have been a few bumps in the road. The issue Im Having now is my laptop that I had just bought not even 5 years ago isn't compatible with the new windows 11 update because of my processor...so now I pretty much have to buy a new device to be able to use design space the way I need to which is really frustrating because I just put all of my money into my cricut. I can't really turn a profit for it to "pay" for itself when I cant use it how I need to...so I'm working on saving up money to get a device that is compatible with the new design space software
You rock! Thank you so much for the details. You done this in detail! You explained everything. I was so undecided about getting one. I am buying one. Can you please do the a video on the different cutting materials? Tysm!!!
This is a good review however i dont need a faster machine at this moment, what i do need its to be able to print and cut big projects and im trying to make it work with my cricut explorer 2 but im really considering silhouette and i will hate to have to change my cricut for a cameo 4.
I've never used a Circut but just watching the Circut Maker next to the Circut Maker 3 makes me not want the original. Wow, speed is no comparison. Thanks for explaining in detail and showing the differences between the two.
I've heard of cricut and my fiancé has an iron on press machine thingy (I really have no idea what it's called. He said you print pictures and put them on t-shirts 🤷♀️) So we started looking at the cricut machine. I started at Hobby Lobby and saw that the Maker and I believe the Explorer could do longer lengths. My fiancé likes the idea of being able to do engraving. I think for us, w/ all our ideas, the 3 is our best bet. Thank you for such an informative video
Hello Angie, Great video, thanks for talking slow, and clearly. demos and explanations are easy to follow, listen to, and not overwhelming or extremely long. My question is, can I cut infusible ink sheets in the Cricut Maker 3 machine with, and without a mat? I want to buy this machine soon and I did not hear this addressed in this video.
Great how-to video ☺️ I like to use Adobe Photoshop or Illustrator to come up with my design instead of design space. I wish Cricut get in contact with Adobe to come up with better software as all major Corporations work with adobe. I will not get the new Cricut Maker 3 until all the bugs it's just like not buying a new car model until the car company figure out all the bugs. I love it if Cricut work on bringing out 24in instead of 12in and work on software issues. I love the idea of no more mat & cut faster but need a lot of work in design space.
I’ve only had my Maker for six months and I love it (but not Design Space!) Will Cricut be making the the original Maker obsolete any time soon and down the line stop supporting/updating it, stop making mats etc, and is it likely that they will introduce new tools (excluding stuff like the roller that obviously only work with Maker 3) that we can’t use with our Maker 1s?
Just so everyone is clear. This is a sponsored video even if she does not clearly state that it's a sponsor in writing or in the video. The review will be favourable. that's how she got the machine early
@@AngieHolden That's only true to an extent. RUclips requires transparency for ads because of legal reasons. I made that common because while the video is helpful it was something that had to be approved by Cricut. That's how brand deals work. The brand gives you the product (most times for free and sometime in advance of everyone else) and they expect you to make content able the product. The contract will say something like submit a video for approval before posting. The reason for that is so you can advertise all the key points they asked you to and so you are not making disparaging remarks and a video they either paid you for or provided you with products for. I like knowing that type of information before I spent that amount of money based on words I heard from your video. It might be mostly honest but there is a back story and if you had negative feelings expressed in the video you wouldn't have been approved to post it or given further free products.
@@AngieHolden I also wonder if you can use small amounts of vinyl or small projects with the smart vinyl. Say I have an image that is only 2x2 inches, will the machine even accept it or do you then have to cut on a mat?
![[Special Clip] ATEEZ(에이티즈) 홍중 'Why Do You Love'](http://i.ytimg.com/vi/I6XYXQKN_pY/mqdefault.jpg)
I have to chime in here. You are literally the only one on RUclips that actually talks directly about whatever the title of the video is. Thank , thank you, thank you! You are informative, to the point without all the extraneous blah, blah, blah that quite simply just wastes everyone's time. Love your videos! Keep up the great work.
I appreciate that!
Really informative and was easy to follow your directions. Awesome video! Thank you.
I agree
Right i was just going to say this
Yes always so much information that's useful to beginners and pros. That's why I come back. I can understand it and so much wealth of knowledge.
How refreshing it is to have a youtuber not blab on and on about unnecessary things. You get right to the point and explain things so very well! Thanks for putting out great content. Very helpful.
Thank you so much for this video! I just ordered the Maker 3 which should arrive during the week of August 12, 2024. I’m completely new to Cricut products and was always unclear how a machine so small could do anything so substantial as the projects demonstrated in your video. You have a new subscriber! Thank you so much for the very thoughtful and thorough video!!!!’
Glad I could help!
As a new Cricut user (7 year Silhoutte user) this is so very helpful! Thank YOU big time! 💕
I literally just bought the Maker 3 for myself, having never purchased any of the Cricut products I am confident I will be pleased. I’m so excited!! Thank you for explaining what products I need to also purchase.
Would be happy BUT Cricut truly needs to Solve Their Horrible Software Issues Including several upgrades as to being able to do several task including being able to actually create our own designs with ease. We would be happy to buy many of cricut designs. Cricut software is in need of major updates that will win many of us over... thank you love all your videos!
Hello ... I want to make textile patterns to design t-shirts or sweatshirts ... but obviously I need to be able to use the rotary blade in a length of 90 cm ... is it possible to configure the cutting area using 30 cm width x 90 cm long and for rotary blade? I know they say you should only use smart material, but what if I glue my fabric on top of the smart material backing ... will you let me use the rotary blade? Has anyone tried? Does the program enable the rotary knife if I choose material without a mat and set an area greater than the 60 cm limit it has? Please someone help me with that ... I urgently need the machine but I don't know if it's worth spending double for the make 3 and I'd better buy the old maker.
I got my first one yesterday, the cricut maker 3 and I got soooo frustrated with the design app that I stopped using it and was in a mood all day. 😒
I just counted how many times I wished my maker would cut three times faster than it already does and surprisingly the number was... Zero. I see very little advantage for me to have a faster Maker, especially because it appears the three times faster is with Cricut “smart material”, so unless I trade the five or so miles of product I already have in stock, it will still be cutting at the old rate. They ought to have put more time and effort into fixing the issues with Design Space. BUT, kudos to them for their marketing! Good business
my maker is currently sitting in it's box for this reason. I HATE design space. I wonder if these new machines wouldn't cut any vinyl matless though. Like they said you HAD to use their blanks to use infusible ink which is totally not true
@@kellyhayes take it out the box and try alternate software. Inkscape (I find confusing) is free, SCAL 5 is good and Silhouette Studio (need to purchase business edition to save as svgs to use with DS -there is a coupon) is great software. I’ve just started using it and I just save as an svg then import to DS and basically use it to cut as my Maker cuts beautifully so win win 😄 Take it out the box and play 🤞🤞
I was so upset since I bought my Maker 3 months ago. But I can live without these new features. I can see if I was more of a professional needing bigger printing space that would be beneficial, but other than that, I agree, faster is not going to make me have buyer remorse.
I agree, only sold by them. It should be faster cut for the machine for same paper, smart or not.
@@jilliej7 which machine would be the best? Explorer 3 or the Maker 3. What are the differences other than speed? I bought the new maker but have not open the box yet because I’ve heard so many negative comments and I’m not sure which to buy. I also want to know what are the options for the software. I can’t afford to sign up and pay for software or stock right now…also, are you able to create your own art? I’m not sure what you call it…but I think it’s called art stock…does it come with these machines? Also…why can’t you other brands of material? Thank you!
Thank you for sharing this video. I am brand new to cricut and have just bought the Cricut Maker 3. I still have it boxed up. I have been watching videos on the maker 3 and yours is an excellent video to watch for beginners. Again, thank you very much for your time in explaining the maker 3. Love that it is so fast. Wish me luck when I open and start making things.
Good luck!!
Same here just got it yesterday from hubby I was going to hold off and do some research on them but I guess now I can start researching how to use it Lol
Thank you so much for this clear explanation. I just got the 3 with 0 experience with Cricut and your video is the number 5 that I saw and is for sure the best explained one.
Glad it was helpful!
Thank you for explaining so clearly the use of the machine. I have had my Maker 3 for a few months and now have some tome to start using it. I look forward to watching more of you videos.
Thank you so much for this video. I have just bought a Cricut Maker 3 and have never used a Cricut machine before! I unboxed my machine whilst watching your video and I am so impressed with how well you have explained everything, thank you. I will subscribe to your channel so that I can get going with my machine even though I’m too scared to use it! ☺️ xXx
I feel the same way! Don’t know where to begin lol but I am going do same whilst watching video.
Me to I just got one and I’m kind of scared but this video is excellent
@@kathybandura7910same girl!
Boy am I glad I watched the entire video! I almost dug into my money jar to see if I had enough to buy the new one! but then you mentioned the faster cutting was for “smart material” only and it basically cut the same speed as the Maker on non smart materials! I don’t use Cricut materials so I guess no need to upgrade just yet from my original Maker, thank you for your videos. I always enjoy watching them!
I saw a video where they put a generic vinyl ... with the smart material configuration and it cut it without problems ... it is just a publicity stunt to sell their expensive vinyl, I want to buy 3 because it cuts longer ... I need make patterns for textile design of clothing ... but I don't know if the program allows me to configure; smart material, 90 cm long ... and if you allow me to use the rotary blade.
Thank you, you explained this so well. Believe it or not, this is the 3rd video I watched on the Maker 3 and you were the only one that said the faster cutting speed only worked if you were using smart material. The others only said that it cut faster so I thought everything was cut faster. Great information!!
Happy to help! I always like to include literally as much information as I can squeeze into a video!
So true...
I just got my Maker 3 today and your video is so informative. I've watched lots of your other videos and you explain everything in detail. Thanks!
Just brought the Cricut Make 3 for Christmas early gift from my husband bless him! So this video has been very helpful so thank you for explaining very thing so well!! Subscribed to your Channel...
Thanks for the video. Wish they would make design space better...
Be sure you communicate these concerns to Cricut.
I was almost worried I invested too early in buying my Maker with this Maker 3 release. Glad to know there aren't any major differences that would effect my work heavily. Super cool features though!
What?? 3 I didn't even know they had a new coming out! My husband just bought me a Circuit maker 😣. But, I do like the idea you don't have to use a mat or cricket marker 3. That's a plus.👏 But, the cutting time.. I did count the seconds and it was only 1mint and 30 seconds faster than cricket maker. 🤔 I don't think I have the need want to upgraded for now, for just 1mints 30sec faster. I think I could wait . Lol
Thank for sharing 😁
It seems you can only use the smart vinyl to not use the mat.
It is like all technology as soon as you buy a model a new one comes out.
Don't be disappointed in your purchase. The one you have is a great machine and really not all that different. Unless you want to do really long narrow cuts of up to 20 feet in a continuous amount the machines are not much different. For those who have an Air 2 it will be a big upgrade as they cut even slower than the Maker, but the Air 3 still only cuts 100 materials while both Maker and Maker 3 can cut up to 300 materials, but ONLY the smart vinyl is mat free. everything else including sticker paper, card stock, fabric and all the other 298 materials need a mat.
Your are my favorite RUclipsr when it comes to Cricut. I’ve had a machine for years but was terrified of it. Your videos have got me into it! Even bought the Maker 3 because you’ve got me excited about this machine!
Definitely appreciate this video, I just purchased my Maker 3 yesterday and was curious about the difference. That was a BIG difference. Well explained and to the point. Thank you.
Wonderful, ty so much, I just bought the cricut maker 3 today, ty for the tutorials.
Have fun!
I can't thank you enough for this video. I got a Maker 3 and it came with no manual. I am not a tech savvy person and I have been having the hardest time with a file I bought but I can't get it to be an svg file. I also had no idea there were so many blades. I am going to re-watch this and take notes. I know you can cut wood but I have no idea of the type and thickness. I need a manual that explains all the features and what they can do. Thank you again and this won't be the last time you hear from me. 🤗
I have plenty of videos on ALL of that! Try this: ruclips.net/video/gn8tmXezWT8/видео.html
I just bought my first Criciut maker 3. I Never had a cricut before. I am excited to use it, your video was very helpful. Thank you.
Hi Angie👋, I am a newbie CM3 user...I would like to thank you for sharing your knowledge and guidance on using this wonderful machine...confidence built after watching this video...Thank you so much😊❣
Glad it was helpful!
Thank you for your time. I just bought the cameo 4 bundle and am perfectly happy with my cricuit maker. Cicut should Fix the software and allow us to write our fonts at any size without the bubble words or hollowing out. Larger cut size area. Thank goodness can save my money.
Can u use the cricut software with this machine?
Thank you so much for showing the differences between the Maker and Maker 3. I just got my Maker so I’m not in the market for a new one yet, but it’s nice to learn about what’s out there. 😊
Glad it was helpful!
How lovely to see a comment from someone who isn’t bitter and angry because they’ve just bought a machine and are happy with what they have 😄 enjoy your machine
thank you! this was so helpful!! I am new to cricut, I've been using a scan n cut for years so I am lost!!! my husband bought this for me for my birthday today. I will be watching more of your vids for help with not only using the machine but also design space. He watched several of your videos trying to decide which one to get me. I use these machines a lot with my home business of homecoming mum making.
we've also been watching your vids on sublimation for a few months now. always so informative and helpful. Appreciate all the hard work that goes into making these tutorials for us!!!! 💖💖💖
That is awesome! Good luck!
i dont even have a cricut but was completely invested in your experiment
First, love Angie. She’s super smart and explains everything so well. I got the explorer air2 and for the 5 months I had it, I was so frustrated. I had to use a deep cut blade to get maybe half of the cuts come out good, never perfect. I thought it was me. You can imagine how much material I wasted and purchased. I did go and get a Maker 3 because I wanted to do the different things it did. And holy crap, it’s awesome. Problem for me, I couldn’t sell the explorer, I wouldn’t do that to anyone, so I wasted so much $. What makes me a little happy is when I purchase non Cricut brand materials 😏
What brand materials do you use or site do you recommend?? I have my Maker3 still in the box bc I was not sure of everything I needed to get for basic stickers and iron on..
Just bought a few rolls and stopped there and grabbed a weeding tool set..need to get transfer tape lol
Just bought the Maker 3. This is the best starter video on RUclips; I've watched MANY. The natural progression to features is perfect. Just when I'm wondering something, you start to cover it. Suscribed.
Thanks!
There are a few negative responses, and I get that... But I am excited. I am going from the Explore (no numbers) to this new Maker 3, so I think I will find a huge difference!
Me too!
New products like this make me want to wait before I get excited or think about buying them. I prefer to have the 'Woo-Hoo first day!"-ers be the mass beta testers so the bugs can be worked out. It also allows the off brands time to create compatible vinyl MUCH cheaper.
I’m excited for you the new machines but I was really hoping the announcement was going to be a larger print then cut area 😂
EXACTLY!
I'm not exited at all. If I had worked with it before I brought it (maker I) I'd have never shelled out for it.
That’s exactly what I was thinking. I believe the only machine they cuts bigger print then cut is the cameo 4. Not sure I just asked that question.
This is what I was hoping for ... I have a maker now but now I’m looking at the Silhouette Cameo
Me too
You always make the best explanatory video’s! Thank you! Could you do a video on fonts that explains the difference between single layer an$ multi layer fonts and when you want the different types of fonts. I get hung up trying to find the right font for doing the mugs and other materials because of this.
Just brought the Cricut maker 3 and just took it out of the box, put my laptop on to see video's on how to use this machine, I have a Pazzles which no longer works that good anymore, it is a good few years old mind you, so I am so excited to try this new Cricut maker 3, thank you as you give very clear instructions!!! will check out more of your video's on the Cricut maker 3. Thank you for Sharing!!! Just subscribed to your channel...
Glad I could help!
Doing research for my grandma and this video really helped thank you
I think I'd need more of a difference to spark me to upgrade. I love the Maker and it has all the functions I need. It does seem that you would be locked into Cricut materials to really benefit from the improvements (It would be nice if Cricut provided a little more free access to their design content)
Well presented and a great, balanced comparison between the two.
I agree but as I don’t have a maker have decided to go with the maker 3 !
@@sueharvey4747 I got my Maker 3 for Christmas from my kids. It is my first ever and I am excited!
Great video. Was happy to hear that you can use the same tools from the original maker and not buy all new ones. Kudos to Cricut !!!! Great video!!!
Thanks for watching!
Just pulled my new Maker 3 out of the box and headed over to your RUclips site as I knew you would have a wonderful video on how to set it up and use the machine. I love your site and it is the first place I turn to when I need to know how to do something. Thanks so much!!
Glad I could help!
Thanks so much ! This video was awesome and very informative! I just ordered a cricut maker 3 and a press machine. Looking forward to try out and make new items for my business.
Cricut needs to come up with a wider cutter; at least an 18in width, but a 24in would be ideal❗
They have them they’re just not cricut brand.
@@MasterOfNone1980 Who sell them?
@@veestu9308 silhouette cameo 4 and 4 plus, graphtec brand, gcc has an expert II 24 lx
@@veestu9308 ruclips.net/video/6an3SK_XD-c/видео.html
V
I really appreciate the presentation. You do a great job, Angie, giving us the info.
Got the Maker 3 for Christmas.
Only had the Joy before and it helped out a lot but now I need to see how to work this CM3 and find out what this baby can do!
Thanks for taking the time to upload vid...
Glad I could help!
I am with most everyone else in wishing Cricut would work on Design Space functions and enlarging the print then cut. Also, I ran out and bought the Joy because I thought the smart material would be a bonus, but alas, I don't ever use my Joy unless I want to make a quick card! So much money wasted! I love my Maker and will stick with it. (I still haven't paid off the mug press! Which I love!) Thank you Angie.
Thank you! I actually use my Joy probably more than any of the others! HA!
Cricut has all the RUclipsrs doing videos today... that's what you call marketing!
For me the New machine is not worth the money. What They need to do is upgrade the software.
@@borikua2001 bigger print then cut.
I was so irritated that I waited 2 hours for Cricut to go Live to announce the new machines, that I literally commented, “I waited for this?!” and logged off. 😂
I literally just bought my Maker last month so I couldn’t care less about new bells and whistles, but I am confused as to the necessity of a new machine since they marketed the Maker as the one that Cricut would simply add to and enhance so no other machine would ever be necessary again. Wish they’d tweak their software and just focus on creating more quick-swap tips. Maybe work on making tshirt blanks that weren’t garbage would be beneficial as well.
@@borikua2001 totally agree. I can’t stand a greedy company.
@@Mamajo864 I feel the same way! I bought the machine in December for my business and it’s been a nightmare to use so I barely use it these days. The software is atrocious unless you’re doing a simple cut. What’s the purpose of having a flat option if it takes 2 hours to read before it moves to the next step. So disappointed with this
greedy company.
Instead of making new machines... which I will NEVER purchase... they should work on that crappy design space.
I am learning Silhouette for this reason. Many people design in it then cut with Cricut. It's free and you can upgrade for a one time fee. No monthly membership.
@@1cariyoung Where would I go for that? TIA
Silhouette website.
@@1cariyoung why don't u cut it with a silhouette?
@@leticiat24465 I'm just saying that's what some people do. Not everyone has a Silhouette. They like the software better than design space.
Thank you so much for making this video. I had a cricket 10 years ago that got broken at my husbands shop. I am now starting a country art and decor business so I am needed a new cricket to aid with my designs. I have never used design space and was looking for a video that would tell me how large of letters I would be able to make. Your video was so informative and you answered all the questions I had.
Thank you. The cricut maker 3 is my first time purchasing a cricut and I have no knowledge so I set mine up as you did yours. I appreciate you taking the time and explaining and demonstrating
You are so welcome!
@@AngieHolden I went and got the smart vinyl and iron on after watching your video
I want to make shirts for my pre k graduation
@@AngieHolden I hope you do a shirt project so I can see how to use the cricut maker 3
Not sure what you were needing to see? I have many shirts projects here.
Thank you for explaining everything so well and adding in all things we needed to know very helpful! Watched more than one video this one is hands down the best explained
Thanks!
Wow! Us poor folks that haven't had the maker long are already behind in tech
not really. It is pretty much the same machine.
Right! LoL. I love my machine so I'm keeping it!
I’m happy for CRICUT, I can hardly wait to purchase one, it’s so fast. However, I’m hoping they’ll fix their print and cut size. I was speaking to a rep who was helping me fix an error message that kept coming up and I asked him if they were ever going to fix the print and cut size and he said he was sure it was in the making.
Bought this today, first time user of Cricut, thank you so much for your explanations, I have subscribed and look forward to seeing more!
Awesome! Thank you!
I make large wood signs for a living and I use a silhouette cameo 4 for that because I can cut stencil vinyl I buy off of Amazon that’s a fraction of the cost and I can cut without a mat. I wish Cricut would have came up with a machine that did what silhouette cameo 4 does with using your own materials. Cricut is being greedy with having everyone need to use the smart vinyl. Costs too much. Great video explaining everything though. I’ll stick to my silhouette cameo 4 for my business
This is off topic and I apologize for that. However, if you are doing stencils you should look into Ikonart. It is a way to make reusable stencils. No more wasted vinyl.
@@1cariyoung thank you!! I definitely will!
I have a video on Ikonart as well if you need it.
@@AngieHolden l love your tutorials
I have no doubt someone will find a hack for all of this to use different materials.
I just got a maker...hmm~ NOW 3?... Seems like just "faster cutting?".... Slow cutting~ It does not bother me so.
I am O~~~K for now. haha
Thanks for the video ^^
Yes I just got mine two last week. It doesn't look that it functions much differently but faster. I really don't have a need to cut out 12 feet of material. So, I'll stick with mine.
AS someone who has refused to give up my Cricut air 1. Im in love with the maker 3! I officially retired my air.
Yay! I hope you love it!
I just bought a Maker 3 today. I brought it home, and I could not open Clamp B! I drove back to Michael’s, and a representative opened the clamp. She had to struggle a little but could open and close it. In front of her, I tried to open clamp B. It took two or three times for me to feel comfortable LIFTING and PULLING on the clamp opener😅.
They can be tough when new. They seem to loosen a bit over time.
So basically if you want to benefit from cutting without a mat, you’d be limited to smart vinyl only made by Cricut? Is that correct?
I haven't found any other materials yet but I will update if I do.
I just ordered mine! Can’t wait!
Yay! I think you will love it!
Thank you so much for taking time out to explain some items on the cricut maker 3.. i just purchased mine on amazon got it bout 2 days ago still in the box i just want to learn as much as i can before i open it .. i already own the original cricut that came out bout 20 yrs ago .. i used it here and there .. but now i finally have free time ( my son is an adult now) i have more time for myself...
Yay! I hope you love it!
Thank you for all this information and getting straight to the point!
I love your videos, and they usually help me make decisions. This one is skewed though to be more accurate and really help us, the test should of been run with both of them using a mat. We already knew from what cricut has said that the smart materials cut fast, I would like to see how they stack up against each other with mats and like materials. Any chance you will be doing that? Keep up the good work, I enjoy watching your channel.
They cut the same speed with a mat. There is no difference.
Thanks for the video, but what a pleasant disappointment the Maker 3 is. I purchased my maker earlier this year and was worried that I should have waited for the maker 3. Please correct me if I’m wrong, even with the smart material, I can’t cut anything wider than I can cut now with my maker (eg material is 13 inches wide but still cuts within the 12 inch parameter) - just longer, but what a waste of smart material to not be able to take advantage of the extra inches in width gained from not needing a mat. No extra speed when cutting with the regular materials...I agree with many other comments, the better effort would be in upgrading Design space and expanding the size limits for print then cut, etc!
You are correct on all of that.
I like that you answer questions.
Thank you so much for your thorough and informative video. It helped me a lot.
Glad it was helpful!
Ohh I was so excited when I heard that a new Cricut Maker 3 came out...and is cutting 2xtimes faster.... but since it only does that with smart materials...I don’t see the added benefit to be completely honest. A real added benefit would have been if it would have done the same with all materials.
😔 i justtttt bought the maker for my birthday and received it few days back. Would love to have an updated maker, although the most significant differences between the 2 makers are the smart materials (ie using without a mat) and also a faster cutting time. Sigh… hope that there won’t be any more differences in the future. Anyways, sending love from Singapore! Loving your videos as they are compact with information! Thank you for sharing
I agree, not really an upgrade. They need to work on the software not the speed.
I got mine yesterday so I’m a bit relieved that those are the only real changes
You'll be fine with the Maker... 💖
Wonderful information. I am ready to order a Cricut Maker 3 but I am looking around for videos to be sure I "need" it. This will be my 4th Cricut. I began in the very beginning with cartridges, no computer interface, and nothing online. Wow! That was a LONG time ago. Subscribing and going back to see more of your videos.
Glad it was helpful!
I still have the original with cartridges as well trying to decide if I need the 3 or not? I mostly scrap book not into all the other stuff.I am over the whole cartridges thing
Angie Thank you so much for your videos iIgot the maker 3 and was overwhelmed until I watched your video thank you so much xx
For the cost, it should've came with the roll feeder.
and at least 1 mat. I had no mats!
Yeah I agree with that, especially since it comes with no mats. I just upgraded from a cricut joy, to a maker ( not a maker 3, just the maker). The maker was $200 off its original price so I couldn't help myself. lol. But, I'm kinda glad I brought the Maker for now and not the Maker 3 in the end.
What makes it smart material? Is it intelligent? What is the difference between regular vinyl and smart vinyl besides the width?
The smart material has a thicker backing that allows it to cut without a mat.
Okay, so just learned that the “smart vinyl” comes with its own mat, so to speak...now, I feel dumb! 🙄😂
My Cricut Maker 3 arrives tomorrow. I am so glad to have stumbled on your channel. Just smashed that subscribe button.
Thank you so much, After watching so many videos and getting confused, finally I found you. So I will be more confident to use my maker 3, I never had one Cricut before. 🌹
Hi, thanks for your video ! I am going to go purchase a cricut maker 3 tomorrow and I am new to the whole thing I want to be completely setup from the get go, what are the number 1 tools and accessories I need to add into my cart when I go and pick this up please :)
Try this: www.thecountrychiccottage.net/cricut-accessories/
Thanks you for sharing the difference of the Maker & Maker 3. What is the difference between the Smart Vinyl & the regular vinyl?
Smart vinyl is wider and has a thicker back to help it feed and cut with no mat.
@@AngieHolden thank you for that info.
Excellent explanation. Not confusing at all .. just bought a maker three for my business and I’m totally subscribed to you now lol
Great presentation. I’m now more confident of my new Cricut. I’ve previously owned only Silhouette machines. Thanks!😊
Is there a cricut machine that cuts bigger print then cut than 9.25 x 6.75? Or is the cameo 4 the o my one that can do that without slicing or any hacks in the cricut?
That is the max on all Cricut machines.
The Brother ScanNCut can cut larger PnCuts than Cricut I believe. Angie, do you concur?
I have never used one. Sorry.
@@Isleskye guess I’ll have to get a cameo 4. I love the cricut but that is the only issue.
So the only real difference is a new vinyl that probably costs more. I was hoping for something more exciting. 😂😭
Same thoughts here; if i am locked into only their vinyl to be able to go without a mat, then maybe not.
True, this “announcement” was nothing short of a disappointment. Didn’t even make me raise an eyebrow (most likely because I was too busy rolling my eyes🙄😂)!
I'm sure it's more. Add in that cricut is sub par vinyl already and over priced. That's a hard no for me.
I am curious as to why they couldn’t just make the current machines accept this new vinyl. It seems so odd to make all new machines for 1 change.
@@fanmommusicismedicine7035 bottom line, money. They see a market and anyone who isn't versed on other cutters will think it's cutting edge and new.
I haven't even opened mine out of the box yet because I'm scared lol. I've never used one and don't know much about them but I'm so glad I found your channel because I've learned so much today lol
Hey there! I was just wondering where you are 4 months later! How is your cricit adventure doing?
@@Bre_Creatively well I got it out the box lol I've done quite a few projects with it. I'm still getting the hang of it. There have been a few bumps in the road. The issue Im Having now is my laptop that I had just bought not even 5 years ago isn't compatible with the new windows 11 update because of my processor...so now I pretty much have to buy a new device to be able to use design space the way I need to which is really frustrating because I just put all of my money into my cricut. I can't really turn a profit for it to "pay" for itself when I cant use it how I need to...so I'm working on saving up money to get a device that is compatible with the new design space software
You rock! Thank you so much for the details. You done this in detail! You explained everything. I was so undecided about getting one. I am buying one. Can you please do the a video on the different cutting materials? Tysm!!!
I have many videos on cutting materials.
I got the maker cause I wanted top of the line so I'm so upset
This is a good review however i dont need a faster machine at this moment, what i do need its to be able to print and cut big projects and im trying to make it work with my cricut explorer 2 but im really considering silhouette and i will hate to have to change my cricut for a cameo 4.
Just couldn’t get to grips with silhouette software, but maybe that’s just me!
Hello Angie, great presentation as always, BUT as with every one else a LARGER PRINT AND CUT SIZE is what is needed!!!
I've never used a Circut but just watching the Circut Maker next to the Circut Maker 3 makes me not want the original. Wow, speed is no comparison. Thanks for explaining in detail and showing the differences between the two.
Thanks for watching!
I wish that I had waited to buy my Cricut Maker know. I really like the new features of the Maker 3.
Was there a Maker 2?
No. They went from regular Maker to Maker 3.
I've heard of cricut and my fiancé has an iron on press machine thingy (I really have no idea what it's called. He said you print pictures and put them on t-shirts 🤷♀️) So we started looking at the cricut machine. I started at Hobby Lobby and saw that the Maker and I believe the Explorer could do longer lengths. My fiancé likes the idea of being able to do engraving. I think for us, w/ all our ideas, the 3 is our best bet. Thank you for such an informative video
Happy to help!
Thank you so much! I will be purchasing the cricut 3 maker and I hope to be able to work on new projects. I will definitely be following you
Wonderful!
Love your channel, forever fan. Thanks for the great comparison 👍
Wow, thank you!
Hey Angie, have you tried cutting the smart vinyl on the original maker without the mat?
I will have a future video trying this.
Awesome, thanks 😊
@@AngieHolden looking forward to this!
Very useful, thanks. Mine turns up in the mail tomorrow!
You will love it!
Hello Angie,
Great video, thanks for talking slow, and clearly. demos and explanations are easy to follow, listen to, and not overwhelming or extremely long. My question is, can I cut infusible ink sheets in the Cricut Maker 3 machine with, and without a mat? I want to buy this machine soon and I did not hear this addressed in this video.
You can cut them but they will need to be on a mat.
Great how-to video ☺️ I like to use Adobe Photoshop or Illustrator to come up with my design instead of design space. I wish Cricut get in contact with Adobe to come up with better software as all major Corporations work with adobe. I will not get the new Cricut Maker 3 until all the bugs it's just like not buying a new car model until the car company figure out all the bugs. I love it if Cricut work on bringing out 24in instead of 12in and work on software issues. I love the idea of no more mat & cut faster but need a lot of work in design space.
Yes, a 24” cutter would be wonderful!
I’ve only had my Maker for six months and I love it (but not Design Space!) Will Cricut be making the the original Maker obsolete any time soon and down the line stop supporting/updating it, stop making mats etc, and is it likely that they will introduce new tools (excluding stuff like the roller that obviously only work with Maker 3) that we can’t use with our Maker 1s?
It is not going obsolete. All tools will work with your original except for things meant for cutting without a mat like the roll holder.
Just so everyone is clear. This is a sponsored video even if she does not clearly state that it's a sponsor in writing or in the video. The review will be favourable. that's how she got the machine early
Just so you are clear I always give my honest opinion.
@@AngieHolden That's only true to an extent. RUclips requires transparency for ads because of legal reasons. I made that common because while the video is helpful it was something that had to be approved by Cricut. That's how brand deals work. The brand gives you the product (most times for free and sometime in advance of everyone else) and they expect you to make content able the product. The contract will say something like submit a video for approval before posting. The reason for that is so you can advertise all the key points they asked you to and so you are not making disparaging remarks and a video they either paid you for or provided you with products for.
I like knowing that type of information before I spent that amount of money based on words I heard from your video. It might be mostly honest but there is a back story and if you had negative feelings expressed in the video you wouldn't have been approved to post it or given further free products.
Excellent demonstration. I just purchased the Maker 3 and glad I did. Thank you this video. I will Subscribe to you videos.
Thanks for the sub!
Looks like there's only one colour option? EDIT: Oh, you just mentioned that, lol.
How much material are you losing when using that material holder? It seems far away from the end of the design.
It ejects it a little. I didn't lose much at all actually.
@@AngieHolden I also wonder if you can use small amounts of vinyl or small projects with the smart vinyl. Say I have an image that is only 2x2 inches, will the machine even accept it or do you then have to cut on a mat?
This is a great introduction to a cricut I plan to buy today. Great job.
Have fun!
Did the print to cut size get bigger????? I need 12x12 to fit my printer..... Would love if this changed.....
It did not. It stayed the same.
@@AngieHolden boo... I will not buy a new one until they fix this...