You need to use braided line and a big sewing needle and push them through the tread blocks takes some time but if do it is more balanced then duck tape and stronger then plastic fishing line to
I hope the rims hold up for you. I have broken 2 of them. If you don't bash too hard, you might be okay. I enjoy seeing someone do their own thing. 6s power on tap in a stock slash, now that is sending it.
What kind of drive shafts are you using on this build? I keep breaking shafts on my 4s build. The geometry is good they just can’t handle the power of the 8k mah 100c 4s packs. I just got similar tires and they’re awesome!
It's funny I have these tires and wheels, Used them on a 4s arrma senton, they're great tires, they balloon pretty bad but never blew a bead. I used to be able to do wheelies with those tires and arrma set up running 40mph then full throttle in the grass.
I've seen the other videos and it looks like the motor went in easily. So did it go in easily or did you have to make more holes? I want to do something similar
@@JacobusRC well I haven’t run my rig yet just cleaned it up jus too get it back dirty lol but I will tomorrow at the beach hopefully...I had some rc station 2.8 mt tires from Amazon on my senton omg love the look of the tires on rig n how it performs but sadly rig got ran ova so did one tire not even 2hrs I had them n that happened so that’s why um trying out different sets
Slash held up better with this wheel/tire combo! Definitely recommend over the stock tires.
your the reason why i made my slash 6s
Heck yeah
Great videos man got out of Traxxas for years just picked up an old beater ..is your diff locked ?
Nope!
You need to use braided line and a big sewing needle and push them through the tread blocks takes some time but if do it is more balanced then duck tape and stronger then plastic fishing line to
I hope the rims hold up for you. I have broken 2 of them. If you don't bash too hard, you might be okay. I enjoy seeing someone do their own thing. 6s power on tap in a stock slash, now that is sending it.
Good to know thanks for the tip. Hoping to fix the ballooning next time around and these should last for a good while 👍🏽
What kind of drive shafts are you using on this build? I keep breaking shafts on my 4s build. The geometry is good they just can’t handle the power of the 8k mah 100c 4s packs. I just got similar tires and they’re awesome!
What I did to hold up my slash body is, I used a spacer and longer screws and it lifted the body up enough to clear the 2.8 trenchers.
Thanks for the tip, will have to try that out
It's funny I have these tires and wheels, Used them on a 4s arrma senton, they're great tires, they balloon pretty bad but never blew a bead. I used to be able to do wheelies with those tires and arrma set up running 40mph then full throttle in the grass.
I've seen the other videos and it looks like the motor went in easily. So did it go in easily or did you have to make more holes? I want to do something similar
Went in easily, nothing needed but different mounting screws from original
Im doin it. I have a motor similar...and the arrma 185 blx esc
Oh yeah saw you comment on that other vid, it’s gunna be good!!
Can you make another video on this😊
Did you gear it down? Normally on 4 or 6s they do flat ground backflips and they usually will flip over not even on full throttle
Yeah it’s on stock gearing, which helped to keep it planted but definitely under geared
I subscribed
You're lucky those axles havent snapped, the top pin in the trans, and melted the slipper. Give it time lol
Back body mounts are adjustable and whats the offset of the wheels?
not sure what the offset is, but just eyeballing it it's close to zero offset
I jus got those same tires..how do it hold up
Much better than stock and they grip good on grass and dirt. Just needs the gorilla tape trick to keep them from ballooning. You like them too?
@@JacobusRC well I haven’t run my rig yet just cleaned it up jus too get it back dirty lol but I will tomorrow at the beach hopefully...I had some rc station 2.8 mt tires from Amazon on my senton omg love the look of the tires on rig n how it performs but sadly rig got ran ova so did one tire not even 2hrs I had them n that happened so that’s why um trying out different sets
I like the tread on the RC station, looks nice. The ones in the video don’t come pre glued which is another problem
@@JacobusRC they don't come pre glued? That's what I want, so I can put them on my alloy wheels
@@rcyalater...2305 Yeah man these tires/wheels dont come pre glued
For me my tires always smell like bubblegum when I open them 💀
Didn't you buy the kit to raise the body? Hahahahaha