Some dude said you can just completely black it out with black electrical tape and just cover the camera lens for the first second of recording and it worked for me!
Thought I should share this. So did this with the stickers he recommended in the video. Did the little hole I put the sticker and in addition a put some gorilla glue on top of the sticker with a Qtip to keep the sticker sturdy and make it shiny and it came out perfect is like there is no sticker there 💪
@pimpdaddy7710 Sorry for the delay guys didn't even see the comments the gorilla glue I put on top of sticker once the sticker is applied works great. BUT the only issue I found is that in low light condition the it won't work due to not enough lighting going in to the sensor
@stkyfngez Sorry for the delay guys didn't even see the comments the gorilla glue I put on top of sticker once the sticker is applied works great. BUT the only issue I found is that in low light condition the it won't work due to not enough lighting going in to the sensor
Fiest thanks for postíng this, i was looking all over the place, this is a great improvement The problem that i have is that it is not consistent,aome times it work sometimes it does not(with the hole that small)
You can double up two stickers, and then when starting a video, hold your finger over the camera for a second and it'll work. Only downside is, can't take photos.
This is the video that i look for a while , can you please do a another video but do only the black tape , 100 % black and do one small hall with a needle , and see if this work , me too my child have anxity with the flash light of the camera and he cant be so normal , i dont know if i buy it or no , any way thank you
Birllaid Light Blocking Stickers, LED Light Dimming Stickers for Routers and Other Electronic Appliances (Black and Dimming) a.co/d/026N1QM It works on mine. But my tint says 60-80% maybe that’s the difference?
@@BoyleFarms I received this exact sticker pack and didn’t work for me. If I make the hole very large on the sticker, then yes it works but kind of defeats the purpose. Small thumbtack hole won’t work.
Great video, can you please do a follow up, going through each step?
Best one I've heard yet.
Did you link the stickers?
Thanks! This seems like an interesting workaround and the best one on the internet so far!
You can also use two stickers and then put finger over camera, start video, remove finger and it works.
Why the worry over a light alerting people that you're recording 🤔
We need more details. Links and step-by-step.
Some dude said you can just completely black it out with black electrical tape and just cover the camera lens for the first second of recording and it worked for me!
Thought I should share this. So did this with the stickers he recommended in the video. Did the little hole I put the sticker and in addition a put some gorilla glue on top of the sticker with a Qtip to keep the sticker sturdy and make it shiny and it came out perfect is like there is no sticker there 💪
You put the glue between the two stickers or on top of the second sticker?
You should make a video
@pimpdaddy7710 Sorry for the delay guys didn't even see the comments the gorilla glue I put on top of sticker once the sticker is applied works great. BUT the only issue I found is that in low light condition the it won't work due to not enough lighting going in to the sensor
@stkyfngez Sorry for the delay guys didn't even see the comments the gorilla glue I put on top of sticker once the sticker is applied works great. BUT the only issue I found is that in low light condition the it won't work due to not enough lighting going in to the sensor
Fiest thanks for postíng this, i was looking all over the place, this is a great improvement
The problem that i have is that it is not consistent,aome times it work sometimes it does not(with the hole that small)
Got to make the whole a lil bit bigger
You can double up two stickers, and then when starting a video, hold your finger over the camera for a second and it'll work. Only downside is, can't take photos.
Do you can open instgarm live?
Can you make a guide on how big the hole needs to be? I used a push pin
I thumb tack size
Have you checked if this still works after a firmware update?
What size stickers do you use? The blackout stickers I have are too big.
Any link for the stickers?
I second this
2 black out sticks or one? What size is thumbtack hole? 80% ? Confusing
Someone please try burning the detector or led using laser. I'm not buying till this BS get taken care of
Same
Youll kill recording on your model if you do this
@@Matanumi Have you tried? How do you know
I saw someone on youtube burned the led, the camera stopped working
@@shishio8216 How did he burn it
This is the video that i look for a while , can you please do a another video but do only the black tape , 100 % black and do one small hall with a needle , and see if this work , me too my child have anxity with the flash light of the camera and he cant be so normal , i dont know if i buy it or no , any way thank you
That works. The hole has to be perfectly in the middle. May take a few times adjusting it
does this method still work for Meta Rayban glasses?
Will this work for photos?
any updates on this, still working?
I like that one
I'm confused. pls do a video step by step.
How did you tint it in addition to the stickers?
Put the tint sticker first then the black out sticker with pin hole on top of that
@@BoyleFarms the tint one has a hole in it as well correct?
@@caf0011no only the black out
This method doesn't work, I bought 80 percent blackout, and it detects it when glasses are on, any other ways?
Did you do the thumbtack hole?
No, I thought that was only for the second layer @@MrEddieNunez
Did it work after putting the hole in both stickers?
Birllaid Light Blocking Stickers, LED Light Dimming Stickers for Routers and Other Electronic Appliances (Black and Dimming) a.co/d/026N1QM
It works on mine. But my tint says 60-80% maybe that’s the difference?
@@BoyleFarms I received this exact sticker pack and didn’t work for me. If I make the hole very large on the sticker, then yes it works but kind of defeats the purpose.
Small thumbtack hole won’t work.
Does not work people
It works but not very well some. Pictures wont go through
@@Matanumi not worth it all stick to the generation 1 stories
@@LastSupervillainwhat is generation 1?
@@DaveDel Rayban Stories are gen 1 the Metas are gen 2
i can still see the light flashing , it is clearly seen in the video , not a perfect solution unfortunately
Because you're looking for the light. It's like saying a sniper camo isn't working because you can clearly see it when you look for it.
Does the ai feature work with the lights off
amazon link, please?
Birllaid Light Blocking Stickers, LED Light Dimming Stickers for Routers and Other Electronic Appliances (Black and Dimming) a.co/d/026N1QM
Do you can open instgarm live with this trick?
There is no other methods to root the glasses from the phone or hack them to turn off the lights? Instead of doing physical things to the glasses?
from dozens of review i watched, there isn't one
@@shishio8216 ok thanks.
Not right now. But I feel like you can disable it through the coding in the software side.
So where is the link
Try this one: amzn.to/3MuSg6S
It does not work at all. The glasses will tell you to remove it
Have you tried it? It must have a thumbtack size hole placed perfectly in the middle
@@BoyleFarms oh yea! Forgot that step 😅 thanks bro
Did it work ?
@@VNTG-cl5rj yes but you will have to make the hole double the size
It work but not in the dark