how to replace all headlight bulbs bi-xenon+ballast+headlamp washer jet mercedes w204 pre-facelift
HTML-код
- Опубликовано: 10 сен 2024
- #mercedesbulbreplacement #w204mercedesbulbsballast #w204ledhighbeam
whats up guys back again with another w204 video 🎥🎥
if your new to the channel im mikey
this is mikeyz vlogz
and on this channel 📺📺
i do a whole bunch of videos on mercedes benz w204
how to videos
tips and tricks
fixes
common fault and issues
and step by step tutorials
helping other w204 owners to DIY themselves at home and help keep the money in your pocket 💲
so if your new to the channel consider subscribing ✔🤞
and joining the community asking questions ⁉
requesting videos and just helping each other out via the comments section i would love to have you as part of the channel
i also do some product reviews and comparisons time to time as i love to share the cool gadgets that catch my eye
in this video i will show you how to replace all the light bulbs in your headlight
if you have bi-xenon then this will directly relate to you
if you have halogen then its going to be similar except you wont have the ballast
and it will be very similar to the high beam replacement bulb
also if you dont have headlamp washers then you wont have the washer jet
but if you do have bi-xenons and headlamp washers
then it will be exactly the same as this
i show how i use led high beam bulbs and have no errors
if you do experience errors of flickering you will need a canbus canceler or a resistor
i hope this video helps out anyone who needs to do this DIY
you do not have to remove your headlamp for the replacement of bulbs
it will make it easier but its not necessary
as for the washer jet and the ballast removal of the headlamp is necessary
its the only way
important!!!
you also need to remove the headlight plug connector
and in order to do so you must pry the clip for the harness and it will allow you to remove the
connector harness
if you have any questions feel free to leave a comment in the comment section below and i will do my best to answer them 💬💬
thank you very much for watching 👁🗨👁🗨
your support will help me thrive to make more content and videos for you guys
thank you from the bottom of my heart ❤💚💙💜❤💖
much love to you all
if you found this video helpful pls give it a thumbs up👍 👍
and dont forget to like✔ share comment and subscribe
hit that notifications bell 🔔🔔
so you are notified when i upload new video or content
sincerely
mikeyz vlogz
DISCLAIMER ❗❗❗
PLEASE NOTE
this is my own personal vlogs. the views and opinions expressed here represent my own and not the people, institutions or organizations that i may or may not be related with unless stated otherwise My thoughts and opinions change from time to time,as i come to learn more and develop my own understanding about the things and issues that i am vlogging about. my vlogs just provide a brief insight of knowledge , views and opinions that i possess at that point in time, which may change overtime. comments are welcome. however please keep in mind that offensive, unrelated and tasteless comments may be deleted. this also relates to off - topic comments. i am not responsible for the content in the comments, or in blogs or vlogs and other online content that i may link to or refer to, other then the comments made by myself. i will not be held responsible for any damages or issues that may occur during or that may arise after the use of this video, if you choose to do so. this video should only be used as a guideline. i am not a qualified mechanic nor a qualified electrician or a professional.
Fantastic ad always u r a God send ...i love the way u do things so clean professional and straight to the point well done ...i love watching ur videos
Awesome video, very comprehensive. I wish I had stumbled on one like this for the newer Mercedes, as this may not be relevant for the facelift MBs. But Props sir. Keep it up.
yes ..but I can say that most headlight are going to be somewhat similar to remove the bulbs etc..I.e clips twist and pull ... unplug ..etc etc ...showing it can be done at home diy is also the key to getting ppl to diy
and kill the myth that merc have to do it
I wish I saw this video one hour ago .Now I have big job in front of me .The whole spring came out and one little tab broke.O well that's what you get for rushing.Thanks anyway.
ull. be ok mate .. yes its frustrating... but at least now ull know for future reference ..hope it all works out for ya bud
Great video. Keep up the great work.
excellent well documented
no need to disconnect battery? i can just do all bulbs on the car? good video brother ...keep it up ...i really enjoyed that
Awesome video as usual bro.
thanks buddy
Awesome ♓➕🔥🔥🔥✔
Great video, bro
cheers bud
Love you exclamation good
you need some strong little fingers for those parking lights while its in the car..if you do not have needle nose pliers dont bother... DO you get error for using those LEDs??
ye but like i said for parking lights of i remove them alot it gets easier .. and no i dont get errors using the leds for high beam... as u saw i could easily pull them out
@@MIKEYZVLOGZ do you error for the park LEDs? I need to put those in it's the only yellowish lights left
@@YusufPetersenCPT no for parking lights leds u wont get error messages it will be all good
@@MIKEYZVLOGZ Hi Mikey. I changed my right turn signal bulb and now the fog light blinks instead of the orange bulb. Any idea what might cause this anomaly. Thank you and kindest regards.
@@dermottfitzpatrick1450 that's very wierd ... that shouldn't happen.. wen u replace the bulb with an original does it still happen?
Good video thank u so much
very welcome friend glad u liked it and it helps you with your issue
Thank bro I’m from Panamá 🇵🇦 i have a question you have some video how to disassemble front bumper of mercedez c280 2008
@@albertoliang2392 i did a video showing how to disassemble my front bar.. but my bar is the amg line bar..abit different to other standard front bars but if u have same bumper as mine..yes i have a video showing how to disassemble everhthing..like pdc parking sensors..the led strips etc..search for front bumper removal
Well explained in details
thank u
Very detailed bro
Hey, great descriptive video.
Do you know by any chance If one can replace the connector where ballast (red end) get connected ? @14:50
Right next to where ballast silver looking wire is coming out
Any help would be helpful as I am trying to solve this issue with my headlight and seems like one of the (+) end connector is fried
Very good video insightful
Glad you enjoyed it
excellent video 💯🔥💥👊
My C300 doesn't have the bi-xenon bulbs, but it does have projectors for the H7 low-beam, do you think it would be a good idea to install Hikari LEDs?
Sparky Iam running the same problem I install h7 led and they didn’t work Flickr three times and then they completely turn off
@@laredoTC Hey Tony, what brand of led did you use? It should come with a CANBUS resistor, which ensures that the flickering problem doesn't happen.
Nice video! I have a question.I have a 2003 Mercedes Benz e320 that has the Xenon headlamp assembly. Some O3 e320 come with halogen headlamp assembly.Can I swap assemblys? I only ask because seems like the plugs are in the exact location.Thank you@
Are u trying to swap from halogen to bi xenon? If so ..I don't think u can as the plugs are wired differently ..although it may look the same and be in the same location the pins can be different... is this what u mean ?
@@MIKEYZVLOGZ was seeing if I can swap from Xenon to halogen! On the back of the assemblys , the main plug harness are in the exact location. So I was wondering if.i can just plug it right up to the halogen assembly?
@@jeflores1000 no I don't think so cuz wired differently
please provide links for the led bulbs
Loving the vids mike ...sub for life i have the same car
Hi can you make a list of replacement bulbs for w204:
T10, py21w, h7?
Thank you
sure thing but if u google it it will tell u too but sure thing I can do that for u
Hey Mikey! I watch all your videos and they were very helpful! Awesome work! 💪
I have an issue, and needing your assistance.
My intelligent headlight motors on w204 are dead, and I can't find replacement ones. 😑 I can't see the part number since the motors are all rusted.
If U know the part number or if motors from another vehicle can be used, any info would be gravely appreciated!
hi mate dp u get an error ?
@@MIKEYZVLOGZ Yep, "Intelligent light system inoperative ".
Diagnostic device reports:"Active curve illumination actuator motor is faulty or the line to the component has a short or open circuit". The motors are rusted, since water was getting in the headlights.
@@ivicaignjatovic3641 I'm not sure Bout that .. but u can try find just the motor ... u won't know the extent of the damages until u open the headlight .. rust and water damage may cause more damaged parts .. but u can try look for a motor replacement alone ...
@@MIKEYZVLOGZ Thanks, will try...
It will solve the issue if U can tell me, were your headlights with that intelligent system moving left/right as you steer?
Since I can see all the parts in your other video about the back shell. Thank you, Mikey!
@@ivicaignjatovic3641 yes that's exactly what happe.s
Where can I buy a cheap quality ballast? Send me a link please!!!
ebay aliexpress
Great video! The ballast is the same part as the control unit right?
yes the silver or black box under ur headlight..its usually mounted under the headlight case
@@MIKEYZVLOGZ love the detailed explanation. I went to a carwash with undercarriage blasters and it forced water into my headlight and fried my ballast. Anything else u would suggest looking at when I go to replace it? Areas water could hide or other cables ect?
@@mitchellwhite9374 wow really but they are sealed waterproof...I think its just gave out
@@MIKEYZVLOGZ there was water in it after that wasnt there before and it died immediately after driving away from car wash. Ive power washed it over 30 times with no problems. First time going to automatic touchless carwash. Def got in the back of it
@@mitchellwhite9374 in the ballast or the headlight?
Mercedes didn't want to have just 1 parking light bulb/headlight due to redudancy reasons.