I bought a BMW E90 for 640€, then i fixed it for 7€
HTML-код
- Опубликовано: 1 окт 2024
- In this thrilling automotive adventure, join me as I embark on the ultimate DIY journey! Tackling the challenge head-on, I purchased a BMW E90 for a jaw-dropping 640€ and wasted no time diving into the nitty-gritty of repairs. Watch as I skillfully replace the ground cable for the engine, swap out the front subframe, upgrade swaybar links, and expertly install new inner and outer tie rods. With a keen eye for detail, I also address pesky engine oil leaks by fitting various gaskets. Buckle up for an exhilarating ride through the world of car restoration - where passion meets precision!
Make sure to check out @olins.studio for quality video content and full video of him detailing this car
You make so cool and interesting videos when i see you posted a new one it makes my day!
Amazing content "diesel Streten". The bargain factor disapears if you had to pay someone both the parts AND the hours. Still, nice work.
Lmao fixed the starting problem for 4€😂 this is exactly why i dont like to take my cars to the shop. That would have been at least 300€ wasted for the new starter. Always try to fix it yourself first🎉
I like that suka word :DDDD
damn those prices in netherland, here in balkan you could buy everything for like 300-400€
Great video again. Nice to see the costs and it proves that you can have a good car without spending too much money if you buy wisely in the first place.Keep up the good work and look forward to the next video
Always check the glow-plugs and the relay when you remove this manifold. Also you mentioned that it doesn't have swirl-flaps which is great and one less job to do. Is it hard mod for this engine for EGR delete or you will have problem with annual inspection? Good job!
Usually I do but the car didn’t have a single dtc code related to glow system so there is nothing wrong with it, and the car still has dpf so I just left everything original, thanks😊
As you see guy bfore probably done stage1 .
@@nikolakarovic5964 oh yeah I forgot to mention in the vid, the car is remapped to stage 1
14:37 Now I want to know what "Sook" means (Probably spelled wrong LOL). Great Video Thank you!! Hard work but Good Job! So I don't even know what engine that is? Is it a 318I or 316I or something we didn't get here in Canada? (Yea I'm in Tyranny ville). I've never even seen injectors like those before. They almost look like they're made for a tractor or something. Which could be true I guess seeing that the direct injection engines were first designed very similar to Diesel engine fueling. OH! It IS a Diesel!! THAT'S why I've never seen that engine LOL. I wouldn't have ever worked on the Diesel ones. LOL.
Haha it’s Suka, yup diesel m57😃
would be nice to make a Q&A video :)
Maybe one day, if there is more people watching😊😃
The detail in the work is immaculate! Beautiful video!😁
Oops, I'm late to the party this time... but awesome video again! I like watching you work and your editing is really good too. Seeing somebody do this kind of work on jackstands is quite impressive, love it! Also thanks for showing, how much you paid. That‘s very interesting as well.
Concerning the oil: In my experience 5W-40 is a good choice for M57 as well as M47, these engines share the same platform anyway. I would definitely prefer 5W-40 to a 5W-30, especially for older engines with higher mileage. Often oil pressure is slightly higher when using a higher viscosity oil, which of course is a good thing :)
Happy holidays!
Thanks, happy holidays😊
Snowy Saturday and a EMS garage video? It doesn't get any better.
Snow? Sounds like a bmw owner dream😂
Great work. Is it 318d? I think they came with no swirl flaps in the inlet.
yea its 318d
That explains it😃
Good job Pal 👍🏻, and a bargain You bought that car for, best wishes from Edinburgh Scotland 🏴 🇳🇴 🚙, cheers!,
Bruce.
I know in VAG all diesels that have DPF take 5w30 oil,you should check out if your BMW needs 5w30 instead of 5w40.
Great work! Loved the video
I might have missed it, but did you replace the valve cover gasket?
Yes
Ong ur gonna BLOW UP. Keep up the videos!!
18:44 did you really pay over 1000€ for that UNDERTRAY?? Must be a mistake no? other then that, nice jobs my guy ! You are like me a bit haha !
90 euro haha, I first show the price of the part in krones, the I show after the total price of the project with all parts😃
@@EMSGARAGEE61 ahh ! that makes more sence :P I was like wooow haha ! Nice to work on the M47 and M57 ! Love mine, well engineered once you figure it out :-) Hard to go back to other brands when you are used to BMW.
@@mickstick2830 I agree😊
Is this a 320D and which year is it ? Because I have a 2005 one with no DPF from factory and I’m wondering if it also doesn’t have swirl flaps
This one is 06 i think, it has dpf doe
@@EMSGARAGEE61 is it a 320d or 318d ? Because 318d dont have the swirl flaps
@@OffBeatViBE this one was 318d
5:45, thats me everytime i work on any car, confident that i got the right size and then be disappointed
Great work and video as always!
Btw i noticed the thing that clips in the wiper on the left wiper arm is broken, i suggest getting proper Bosch wiper blades for the Norwegian Winters. :D
It sounds unrealistic but actually Biltema wipers have better cost-quality ratio than Bosch in nordic winters.
@@luikasss All my nordic friends use OEM Mercedes, BMW wiper blade but Bosch is the 2nd best for durability ( i do detailing and etc) next to the OEM ones they can last up to 2 years with no problems!
Liker hvor bra og detaljert video du lager og at du bruker kvalitet deler osv. men biltema olje forventa jeg ikke😂😂 ikke noe galt med biltema olje men jeg så det ikke komme😅😅
Haha, det er faktisk carlube som er leverandør av olje til Biltema, og det er heilt grei kvalitet, full brukbar på disse gamle motorer😊
Love these videos. The thing I love the most though, I own an Audi (I am a VW technician) and I get upset at how expensive Audi parts are. Then I see how expensive BMW and Mercedes parts, makes me feel way better about Audi prices. 😂😂😂
Hahah, the problem is that Norway has expensive parts because its not in EU, all the tax and stoff😃
@@EMSGARAGEE61 Yep, same here in the US. Import tariffs and the fact that most of Europe hates us. 😂😂
@@EMSGARAGEE61 it ie extremely high to me greetings from Slovakia
Very good video what are those times with the bmw logo called ?
To be honest not sure, just had them laying around
First vid ive seen from these guys! he seems so young and so Knowledgeable, brothers, father on hand to show him the ropes i guess 🤔 Wish i had that kind of confidence when doing the odd job on my M57 but that comes with working around that field of work.
Looks like i will be doing my own rear pads and disc garage wants £450 from me... You can do one mate 😂 keep up the good work guys!
1306 for the undertray 😂 is that correct?
I edited it weirdly, 1306 was the total price, the undercover was like 80 euros, still expensive😂
cool job man, i love this car! you do a good deal with this car!
Fan from Canada
just wow!!
Good job
How do you know how much newt. have to be on these bolts?
Ista+
Haven’t seen your video yet but looking forward to it later this evening. Your videos are always enjoyable mate, keep it going 👍🏼👍🏼
Bra video👍🏼
The diesel BMW king is back 🎉
Great video, cheers! Can I ask if the convertion is correct though. Over €1000 for an undertray?? I paid €200 in the UK.
I payed around 90 euro for the under tray, i firstly show the price for the part (1000 Norwegian krone) and after the sum of all
you are from Denmark?
Lithuania, live in Norway
good job!!!! but when I saw parts price!!!!
Really good video!! You inspired me to work on my own car
I really enjoyed that video keep up the good work your doing😊
Hi, love your vids. Where you allways get the torque specs from😎
Ista+
8:30 the impact with the chrome sockets :D
Bad boy life😂
Virkelig fed video hilsen fra Danmark
have the same car, with same engine.... currently mine has a roudh idle... but only sometimes...the revs bounce up and down maybe 50 to 100 reves maximum. any ideas what it could be? ps: great video!
There is many things that could be wrong, firstly would start with diagnostics and what that says, then check injectors
@@EMSGARAGEE61 thanks, ran some injector cleaner through it last week, seems to have helped
Min norska broder, snyggt jobbat
Jeg antar du sa feil, men det er ikke 5,5 liter olje, 5,2 skal det være :) Men igjen, moro å følge med på deg, keep it up! :D
Ut ifra det jeg fant var det 5,5? Men jaja 300ml ikke så mye å si😂
Hey guys lets hit that like button to support this guy!
hands down the best car the auto industry has seen since it was released
very good videos! I like your work!
super video 👍
good job
Du borde vara sponsrad av Biltema 😅👌🏻 Grymt jobb som vanligt 💪🏻👌🏻
Hahah faktisk, har en Biltema 5 min unna, de kjenner meg godt igjen nå😂
@@EMSGARAGEE61 Haha det tror jag också 😂👍🏻
som vanlig blir dette en bra video ass
Good job man, good job!👍😎
Lietuvis?
Taip
@@EMSGARAGEE61 jeez, so how many languages apart from Russian curses you know? :D
Four? Or is it all Google Translate for the rest apart of English?
@@networmx128bit I speak Lithuanian, English and Norwegian, rest is google translate, well apart of curse words😂
@@EMSGARAGEE61 sounds epic, mate!
ASALAMALEIKUM BROTHER. ALLAH IS GREAT,
Great work dude, really enjoyed that ❤
Geri video tavo. patinka :)