Great video Slade! Everyone, do yourselves a favor and buy the best quality beading that you can. It’s no fun having to trim out all of the holes. I used Wolfsburg West beading for my 63 and didn’t need to trim.
Thanks man. I didn't think about tightening bolts as I put the bead on. Have to redo a fender or two because the beads look uneven but I'm probably the only one who can really tell.
Man, that baby's really coming along, I should replace the beading and rubber seals all around too, there's nothing wrong with them, it just looks good.. that tiny detail of being new Thanks man, love seeing the updates, great content, my friend! 🤟
Wesley alan Thanks Wesley you’ve been with me since beginning!! Those little things really help a lot!! Thanks so much for staying with me!! The next project will be fun too!! ✌🏼🍺🍺
You have the patience of Job, I would have stopped no more than two minutes in the process, 😂! You did it and it looks great! Yeah, just cut it off! Stay safe!
Thanks for the video... I bought white beading from cip1 it should look nice, but it's not even cut. Good thing i saved my old fender beading to trace... .still a hassle 😪 🙃
Greg Logan Sadly only Wolfsburg West seems to sell the ones that are perfectly cut. Lesson learned for me. Just take your time and do it the way I did it, you’ll be good! Thanks for being here Greg!!!
Hey As the old folks would say you should have followed your first mind, 😂, like you have more than one, 😂! They meant; you should have followed your first thought!. Nice quality is good!
How Laney Lives Haha, I so remember my pap always saying things like that. He was a great guy to be around. Thank you my friend!! Looking forward to more of your videos!! ✌🏼✌🏼
Brent Chastain Thanks Brent!! My wife bought me that! 🤦🏻♂️😂 I am going to get stickers made at the request of Facebook friends. Thanks for being here!!
The black really pops with the red! Nice tip to tighten as you go. I would have clamped them all down only to have to go back and redo them if the trim slipped down🤣!! nice shirt btw, are you selling merch yet?
The Bad Bug Oh yeah move along slow and tighten each one! It’s nice when all these little things get replaced makes a huge difference!! I may get some things made, shirts and stickers, it was requested by a following on my Facebook. Thanks so much for being here!!!
Yes it was painted in my garage. This time around, when I paint my 68, I’m going to film for RUclips. I didn’t bother last time, I didn’t think many would be interested in seeing it. I wished I would’ve.
@@elleglaser you’re very very welcome, I hope the videos are helpful!! Now I just want to make sure of something. The 73 super beetle that I was redoing that you are watching, was a little bit of older videos. I was using tail lights from the 68, so if yours look like those, you need different ones than what I’m going to show you. But if you have the big round super beetle tail lights, then click the link below. Those will be the seals that you would need my friend. I’m also on Facebook as Slade Beetles socalautoparts.com/product/tail-light-seals-bug-super-beetle-left-right-2/?gad_source=1&gclid=Cj0KCQjwsJO4BhDoARIsADDv4vBvZ6hlOHPQzT6K3gFVxfUxSAB-oA_aJutfkx0DzvTXBDqnkDWLopAaAnbMEALw_wcB
I’d rather fab 36884679764449 parts from raw sheet metal than install fender beading😂....get one side in and front pops out, holes don’t line up, gotta lay upside down and backwards to tighten fender...you did well esp being on film doing it😂👍
marcijunebug oh dang 😂😂😂 Your so right my friend! It is a pain!! Your fabbing work is absolutely amazing!! I truly am speechless at your work! Thanks so much for the kind words! ✌🏼
Will do!! Good tip and I appreciate that! I'm actually shopping online as we speak, looking for a blue tooth microphone to improve my voice being louder!!
Great video Slade! Everyone, do yourselves a favor and buy the best quality beading that you can. It’s no fun having to trim out all of the holes. I used Wolfsburg West beading for my 63 and didn’t need to trim.
Dub World Exactly!! I was not happy!! I really like Wolfsburg West! Next time around, it will be through them! I buy a lot from them!
Best Bug DIY-channel in 2020! Love your videos. Greetings from Germany 🇩🇪
JakobHH Thank you very much!! Lots of good channels out there. I appreciate you being here!! Germany is a beautiful country!! ✌🏼
looks great i did this many years ago on a 67 bug. boy it was a pain to get it to look right. you did a great job.
OFF AXIS BUILDS Thanks! It is a process and a pain.
👍 I like the 72 rear taillights on 73 model.
Vintage 76 vipergreen # Romeo Thanks!! I’m just not a big fan of the large round tail lights. Thanks for watching and commenting!!
@@SladesVWBeetle
I like 68-72 rear taillights also. I wanted to do the same thing on my bug,but it wouldn't look good with the 74 and up bumpers.
Vintage 76 vipergreen # Romeo It May still look good!!
This is still on my list of things to do.
Passenger tail light seal, fender beading, then onto door panels.
Garry Cahal It’s so worth it!! Those new seals all the way around truly give a nice touch! Thanks for being here!
Thanks man. I didn't think about tightening bolts as I put the bead on. Have to redo a fender or two because the beads look uneven but I'm probably the only one who can really tell.
Very nice. Once again u put out a vid right after i do the job. Next time ill wait a week before i decide to fix something to get ur tips 😆
skullthesenuts Oh geeez! 🤦🏻♂️ We need to keep in touch before I film! 😁 Thanks for being here! I truly appreciate it!!
Man, that baby's really coming along, I should replace the beading and rubber seals all around too, there's nothing wrong with them, it just looks good.. that tiny detail of being new
Thanks man, love seeing the updates, great content, my friend! 🤟
Wesley alan Thanks Wesley you’ve been with me since beginning!! Those little things really help a lot!! Thanks so much for staying with me!! The next project will be fun too!! ✌🏼🍺🍺
@@SladesVWBeetle yeah man, its a great journey! 🤟
You have the patience of Job, I would have stopped no more than two minutes in the process, 😂! You did it and it looks great! Yeah, just cut it off! Stay safe!
How Laney Lives Thank you my friend!! Patience is the main thing with cars 🤦🏻♂️😂 Stay safe my friend!! ✌🏼
a nice detail. i never even noticed they were on there before.
Thanks very much, I try to create as many videos as possible, to help others.
Thanks bought my bleeding from JB white in color.
@@JohnThompson-vc3fn outstanding!! I should buy white for my 68, good idea!
Thanks for the video...
I bought white beading from cip1 it should look nice, but it's not even cut. Good thing i saved my old fender beading to trace...
.still a hassle 😪 🙃
Greg Logan Sadly only Wolfsburg West seems to sell the ones that are perfectly cut. Lesson learned for me. Just take your time and do it the way I did it, you’ll be good! Thanks for being here Greg!!!
Hey
As the old folks would say you should have followed your first mind, 😂, like you have more than one, 😂! They meant; you should have followed your first thought!. Nice quality is good!
How Laney Lives Haha, I so remember my pap always saying things like that. He was a great guy to be around. Thank you my friend!! Looking forward to more of your videos!! ✌🏼✌🏼
Shirt is cool. Need to start selling merch. Haha
Brent Chastain Thanks Brent!! My wife bought me that! 🤦🏻♂️😂 I am going to get stickers made at the request of Facebook friends. Thanks for being here!!
The black really pops with the red! Nice tip to tighten as you go. I would have clamped them all down only to have to go back and redo them if the trim slipped down🤣!! nice shirt btw, are you selling merch yet?
The Bad Bug Oh yeah move along slow and tighten each one! It’s nice when all these little things get replaced makes a huge difference!! I may get some things made, shirts and stickers, it was requested by a following on my Facebook. Thanks so much for being here!!!
That's another one of those jobs that I kinda have a love hate relationship
Popularity Contest Brother, the quality of stuff isn’t the same. We shouldn’t have to recut the slots for the bolts 🤦🏻♂️
Seriously though why make inferior products
Popularity Contest Sadly brother this goes on a lot now. It seems now we’re surprised when a part actually works. It shouldn’t be that way ☹️
I've had my fender beads in the bag for months lol 😆 just gotta get er done
Sometimes its just hard to find the time and motivation, huh?! Lol!
...thats my issue anyway,haha!😁
VW RICH FLAT4 Get Er done Rich!! You got this!! Your coming along nicely!!
dang! i hadn't looked at your sub count in a while. 820. i picked ONE up today hee hee
Scotty C Honestly I’m shocked. It just started jumping
That's a slick Beetle. Did you paint the car yourself? Thanks for sharing.
Yes it was painted in my garage. This time around, when I paint my 68, I’m going to film for RUclips. I didn’t bother last time, I didn’t think many would be interested in seeing it. I wished I would’ve.
Where did you get your tail light seals? I can’t find them for my year car on cip 1
@@elleglaser what exact year is yours and standard or super?
Hi! I’ve got a 1974 super beetle. Rebuilding by myself and need all the help I can get! Your videos are awesome!!! Thank you so much!
@@elleglaser you’re very very welcome, I hope the videos are helpful!!
Now I just want to make sure of something.
The 73 super beetle that I was redoing that you are watching, was a little bit of older videos.
I was using tail lights from the 68, so if yours look like those, you need different ones than what I’m going to show you.
But if you have the big round super beetle tail lights, then click the link below.
Those will be the seals that you would need my friend. I’m also on Facebook as Slade Beetles
socalautoparts.com/product/tail-light-seals-bug-super-beetle-left-right-2/?gad_source=1&gclid=Cj0KCQjwsJO4BhDoARIsADDv4vBvZ6hlOHPQzT6K3gFVxfUxSAB-oA_aJutfkx0DzvTXBDqnkDWLopAaAnbMEALw_wcB
Thank you for being so thorough! You’re my new favorite channel!
@elleglaser thank you I truly appreciate the kind comment.
I’d rather fab 36884679764449 parts from raw sheet metal than install fender beading😂....get one side in and front pops out, holes don’t line up, gotta lay upside down and backwards to tighten fender...you did well esp being on film doing it😂👍
marcijunebug oh dang 😂😂😂 Your so right my friend! It is a pain!! Your fabbing work is absolutely amazing!! I truly am speechless at your work! Thanks so much for the kind words! ✌🏼
Slades VW Beetle next time I need beading I’m flying you here to do it 🤣 I hate it! Lol
marcijunebug 😂 It is kinda a pain in the butt!!
Wish you had your mic closer to your mouth and hat off. You visit is always in the way of the video camera.
Visor
Will do!! Good tip and I appreciate that! I'm actually shopping online as we speak, looking for a blue tooth microphone to improve my voice being louder!!