Dremel 3000 Review And Accessories Overview
HTML-код
- Опубликовано: 24 июл 2024
- In this video I unbox and review the Dremel 3000 and accessories and attachment. There are a few different versions that come with different accessories. I go over each accessory included and talk about what it is and what it can be used for. The Dremel Rotary Tool can be used for so many different things. A great tool for Hobbyists and DIY. This kit also makes a great gift!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
Dremel 3000 Rotary Tool Kit On Amazon (Choose Your Style) - amzn.to/3y09DW0
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3SIsjDe
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3ICqN0O
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41zSCiG
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.
![[Phone Skin Printer] Dirty/ Motley Spot Processing Video](http://i.ytimg.com/vi/sDC1D2y9ka0/mqdefault.jpg)
Thank you for the overview. Just got mine in and can't wait to get started on it. Looking forward to your other videos on using the accessories.
Thanks for watching, I appriciate it! Good luck with your new Dremel!
Thanks for the video you did a really good job and straight to the point.
In the 70's my father used one for his train hobby back then he had a foot pedal to the rotary drill to control the speed! So I always wanted one for years and finally got mine the Dremel 3000. What an awesome machine! 👍🏻
Hi Rudy, thanks for watching! That's a cool memory and story to have about your Dad. Are you carrying on the train hobby? Hope you are liking your Dremel 3000.
@@ToddsGarage 😆 That's would be a expensive Hobby for sure., He did it for years. The Dremel Rotary Tool is one of the best. Thanks.
Has anyone noticed that the speed/power switch is slightly erratic at lower speeds (between 2 & 4)? Mine occasionally won't even start spinning. I have to go back to "power off" and again to 2. Also, once the selector is at 2, the speed seems to change on its own over time. Not by a lot, nevertheless, it's inconsistent, and it keeps increasing on its own. It's my second Dremel. I sent the first one back for exactly that reason. Is that anyone else's experience? Thanks
helpful video. will be using for some drag boat engine polishing!
It is a perfect tool.for cutting lug nuts and other car parts.Will buy again
Got mine for a job I knew needed a dremel. Now I don't regret it! It basically paid for itself on first use!
Thanks for watching, glad you like the Dremel!
Nice video, just bought one and this was a great instructional video!
Thanks for watching, I'm glad you liked the video!
While I was using mine the little screw flew out of the mandrel along with the washer and then the little piece that holds it together supposed to be some kind of little rubber nuts eventually it worked its way out of the tip while I was working and got shredded and now I can't find a replacement anywhere any suggestions of what to do in cases like this
Great video! I just ordered one for myself ^_^ I already have one of the battery powered ones but it dies too fast for me to make much progress on my projects. Can’t wait for it to arrive!
Hi Axel The Red Panda, thanks for watching! Thanks for the feedback and I hope you enjoy your new Dremel rotary tool!
Thank you so much, kind sir!
Got one for our anniversary but mine didn't come with case or dust protector . I had the case for an old one and it fits perfect :)
Thanks for watching! Hopefully you enjoy your gift!
Is there attachment that cuts holes in shells?
Thank you for this breakdown.
Wish Michael's linked to this video anytime someone buys their 3000's.
Thank you for watching, I appreciate that feedback!
Why would you buy a dremel from Michaels? They are literally 40% over priced. Buy an amazon prime membership for one month you can get a dremel 3000 for $54 free shipping with prime membership for a month thats $12 = $68 total. Michaels sells the 3000 for $99...
@@ehrgeiz5649 1.) I go to Michaels alot because I'm an artist and Michaels shits more deals than a White Castles fanatic.
2.) The deals rack up in the way of points and if you get enough, they give you money off of future purchases.
3.) I got it for a steal of 30 bucks.
No membership required.
@@Tentegen but you had to spend a lot to get those points. Not $12 for a one time fee free shipping.
Just bought this. Not sure why but none of the tips will fit in that small hole. It does not get wider if I loosen the collet. It is a fixed size so I cannot use it. I guess I will return it.
7:27 Hi. Just want to make it clear. When putting the bit, you mentioned "put it all the way down". But according to Dremel YT video, "do not put any attachments all the way down."
No mention of the collet.
Thank you. Best explanation for someone who has never used one before.
Is it normal for speed 1 to not even fully rotate?
Hi and thanks for watching, I would contact Dremel for assistance with that issue to see if they can help.
Got mine (3000) today. Lower speeds were not even rotates, just a humming sound. It started to rotate at half the slider switch. I'm thinking of returning this asap. My excitement turned into disappointment.
Non of the attachments fit? What am I doing wrong 🥺
Thanks for watching, I am not sure why the attachments are not fitting. I hope you were able to figure it out.
Becuz it's a dremel...not a Sawzall...ur not suppose to try and attach ur wife's 9 inch toy on it.
You missed the easy on easy off feature of the Dremel t
Hi and thanks for watching, I appreciate it. I have a separate video for the EZ Twist nose cap if that is what you are referring to.
👍
Finally... I can knock the dust off and actually use it.😆😆😆
Too bad you didn't show how the flanged collar next to the collate, unscrews form the body (EZ Twist) to act like a built in wrench. Check out the official YT Dremel vid to see it in action.
omg
Why not open the box correctly?
I'm not unplugging for every bit