You can see the full 4-Blade & 3-Blade Prop Review Here: FINALLY! - NEW Master Airscrew Propellers for the DJI AVATA😯 ruclips.net/video/_9fbgnhwN-8/видео.html
Sorry about your crash, but I’m glad to see you got the drone back and your back in the air again. Nice flight, that a good space to practice in. I got the Avata in, and I’ve only had a few flights so far, I like it so far. Great video Chad, and thanks for sharing.
No special effects, no music...proceeds to show special effects and play music 🤣🤣 In all seriousness, cool video! I really like the Avata. I think it's what the DJI FPV drone SHOULD have been!
I’m going back to stock props too. I tried MAS 3 and 4 blade props. To my ears the 3 blade props had a little pitch than the 4 blade and stock props. The MAS props do seem more brittle. I cracked the 3 blade props on a very minor crash. I’ve crashed the stock 5 blade props pretty hard with no damage.
You can see the full 4-Blade & 3-Blade Prop Review Here: FINALLY! - NEW Master Airscrew Propellers for the DJI AVATA😯 ruclips.net/video/_9fbgnhwN-8/видео.html
Dang it! I love the way the MAS props look! I got the 3 blade and the dang drone won't fly "freestyle" at all spirit freaking out. I crashed twice over it. Really weird.
I put the three blades on my avatar two. Amazing since the first version is heavier these things just carry it so nicely but yeah if you crash they’re gonna break but that’s why I just keep the stock ones on hand. And I’ll probably buy about 10 sets.
You have to get a real fpv drone. You’ll love it. The avata is a good way to learn but compared to a 5 inch , it’s a paper plate. Get a nice 5 inch diatone Roma or an iflight anything and you’ll see the difference. I promise you, you’ll love it. And go for a 6s. Trust me
Did you ever have the original avata props shatter on you? I definitely know what you mean about getting the confidence back to 'freestyle' after a crash. I enjoy building drones, but hate doing repairs!
Never had the original props break. Just got a couple of nicks. However, I've broken an ORANGE prop. Only one blade broke in half. It didn't totally disintegrate like the Master Airscrew.
i already break 3 of the original ones :D they just blowned up after 4-6m height drops from crash.... :D 1 is blowned up while doing turle so it was probably already hurt in the crash :D
@@ChadB Happened to me 2 times with original props. No stress, no prior damage on them. last one was in an event and our head pilot inspected the drone before take off as well. Wasn't even pushing it when it happened, flying on manual straight and bam, it tumbled down and when I got the drone back, 1 prop was completely gone.
Nice review, bro... So, what was your overall thoughts of the 3 blade props? Worth purchasing? Also, are the 5 blade orange ones you're using made by Dronetech? I hear they're the closest thing to the real McCoy. Thanks.
Your project frame rate settings are not good, how come you are not bothered with those framerate hiccups, or is it just me? Those tiny for example (49.97 fps, I dont know exact value) play a huge difference, try it. You see, based on that value every X frame gets skipped.
Enjoyed watching! I am just about to your skill level in my acro flying. I'm currently using the MAS three blade props, and really like the performance. They look cool, too :) I'm apprehensive about taking off in M mode, though. I always use Normal mode to get airborne, then switch. Would love to see a short tutorial on your procedure.
I gave up on Master Airscrew when I purchased the props for my Air 2. They weren’t enough of an upgrade to justify flying with them. Possibly voiding my care refresh. They also felt flimsy. I used the Master Airscrew props for my original Air and was happy with the product. They definitely made a difference in the noise pitch. I’ve heard nightmare stories with the foldable Phantom 4 Pro Master Airscrew props. One of my boys received a notification and the P4P quickly fell out the sky. He didn’t have time to react. One of the props failed. Those props required a little more assembly to install so Master Airscrew never took accountability for that disaster. I had purchased those foldable props for my P4P as well but after hearing what happen I decided to not install them. So now I just avoid that brand altogether.
Yah, Chad. I’m curious about prop options for the noise issue, so thanks for exploring it. I super like your video style! Glad I found your channel. 🙏🏽
I don't have a Avata but do have an air 2s and mavic 3 classic. I definitely notice a pitch change with the master air screw but both drone sets of blades eventually start to loose balance and tend to shake the rear arms even just sitting on the ground with the props going. The air 2s was even slightly moving towards the left just sitting on my driveway. I always wonder if the shaking will eventually put stress cracks in parts of the rear arms. I have gone back to the stock props but definitely notice the buzzing sound difference with the standard props.
I just added these 4 blades to mine and got my first set of scratches due to one prop breaking off. Sent the drone immediately into the ground. Im going back to the oem ones.
I spent about $5,000 on this DJI grrbage and never made a single dime off it. Things they don't tell you. Don't waste your time or money, it's a r1p0ff. Nobody is going to pay you to fly an RC toy around the sky, any more than they'd pay you to drive an RC truck around on the ground.
Chad! What camera angle do you fly with on the avata? Im going to fly mountains, ridge lines, beaches etc no race courses...just trying to figure the best angle?
I've never flown a drone before. I'm curious, the view through the goggles, do you get a sense of 3D dimensionality similar to an Oculus VR system or is it like looking at a flat image/screen?
Doing such a thing would require either a stereoscopic camera on the drone, or another form of depth perception (like a depth camera on the drone or AI depth reconstruction in the headset). There's a few technological challenges to doing that. Haven't seen such a thing with drones yet. FPV is still in 2D but it's still much more immersive than looking at a screen.
Chad I watched you fly in this video and have absolutely come to the conclusion that you are absolutely ready for a five inch fpv. Grab one and you’ll never fly that avata again. Just make sure to get a remote that isn’t that little grey dji one, it sucks. Grab a remote with full gimbals. The throws on the dji one are too short. The other dji(black one) is awesome. But it won’t work with goggles2. Will with the v2. Confusing, I know. But trust me, you’re ready, and it’s night and day. You will love it.
Had the same issue today with Master Airscrew 4 blades props. Very smooth crash trying to hit a gap and the prop just broke in two peaces...Going back to stock props for now
Great video Chad and good to hear your opinion on the props. Just ordered the googles and hand control for my Mini 3 Pro. Many thanks for sharing the info :)
Days after your first review of the Master airscrew propellers I ordered the 4-blade propeller for the Avata because I liked your tests. And with the guarantee that from my own experience this brand has a good product that really works very well for the Mini 3 Pro :(
I've been flying drone for a while now I must own about 20 to 30 of them. I own 3 DJI drones. The Mavic the FPV and the Avada. One that I'm trying to get more flight time on is my new Nazgul F6. There are a lot of nice drones on the market. I love my DJI drones but I think you'll do fine no matter what you do. Go ahead take the plunge you're ready
You can see the full 4-Blade & 3-Blade Prop Review Here: FINALLY! - NEW Master Airscrew Propellers for the DJI AVATA😯 ruclips.net/video/_9fbgnhwN-8/видео.html
Sorry about your crash, but I’m glad to see you got the drone back and your back in the air again. Nice flight, that a good space to practice in. I got the Avata in, and I’ve only had a few flights so far, I like it so far. Great video Chad, and thanks for sharing.
Thank you, Ron. Yeah, I saw that you have one now. When is the flight video coming?
@@ChadB Soon, I didn’t even a memory card in it for a few days.
Hello "Chad B"! Thank you for showing us such a wonderful video! I feel so happy! I'm looking forward to your next work! Have a nice day!
No special effects, no music...proceeds to show special effects and play music 🤣🤣
In all seriousness, cool video! I really like the Avata. I think it's what the DJI FPV drone SHOULD have been!
I’m going back to stock props too. I tried MAS 3 and 4 blade props. To my ears the 3 blade props had a little pitch than the 4 blade and stock props. The MAS props do seem more brittle. I cracked the 3 blade props on a very minor crash. I’ve crashed the stock 5 blade props pretty hard with no damage.
You can see the full 4-Blade & 3-Blade Prop Review Here: FINALLY! - NEW Master Airscrew Propellers for the DJI AVATA😯 ruclips.net/video/_9fbgnhwN-8/видео.html
Dang it! I love the way the MAS props look! I got the 3 blade and the dang drone won't fly "freestyle" at all spirit freaking out. I crashed twice over it. Really weird.
Yeah, I didn't really like the 3 blade. Seemed a little "floaty" when flying.
Did you damage the props when you crashed?
I put the three blades on my avatar two. Amazing since the first version is heavier these things just carry it so nicely but yeah if you crash they’re gonna break but that’s why I just keep the stock ones on hand. And I’ll probably buy about 10 sets.
Interesting thoughts on the prop selection. Thank you for some good content!!!
I was waiting for you to fly under that mower! LOL
Lol...
You have to get a real fpv drone. You’ll love it. The avata is a good way to learn but compared to a 5 inch , it’s a paper plate. Get a nice 5 inch diatone Roma or an iflight anything and you’ll see the difference. I promise you, you’ll love it. And go for a 6s. Trust me
MAS props fall into the category of "if it ain't broke, don't fix it."
You don’t specify what brand the orange props are?
Did you ever have the original avata props shatter on you?
I definitely know what you mean about getting the confidence back to 'freestyle' after a crash. I enjoy building drones, but hate doing repairs!
Never had the original props break. Just got a couple of nicks. However, I've broken an ORANGE prop. Only one blade broke in half. It didn't totally disintegrate like the Master Airscrew.
i already break 3 of the original ones :D they just blowned up after 4-6m height drops from crash.... :D 1 is blowned up while doing turle so it was probably already hurt in the crash :D
@@ChadB Happened to me 2 times with original props. No stress, no prior damage on them. last one was in an event and our head pilot inspected the drone before take off as well. Wasn't even pushing it when it happened, flying on manual straight and bam, it tumbled down and when I got the drone back, 1 prop was completely gone.
Cool
Nice review, bro... So, what was your overall thoughts of the 3 blade props? Worth purchasing?
Also, are the 5 blade orange ones you're using made by Dronetech? I hear they're the closest thing to the real McCoy. Thanks.
Your project frame rate settings are not good, how come you are not bothered with those framerate hiccups, or is it just me? Those tiny for example (49.97 fps, I dont know exact value) play a huge difference, try it. You see, based on that value every X frame gets skipped.
I learned about props the hard way. A little flex is good. Rigid props are brittle and prone to stress cracks which can result in failure.
True but also master aircrew knows exactly what they’re doing
Hmm now I don’t think I’ll get them!! As I crash a lot 🤣🤣🤣. Chad, what make are your orange propellers? Thanks Jackie
Can't remember the name off hand. Will have to get back to you when I look it up.
Here they are: DJI Avata Drone Propellers... www.amazon.com/dp/B0BJFJDJJB?ref=ppx_pop_mob_ap_share
Enjoyed watching! I am just about to your skill level in my acro flying. I'm currently using the MAS three blade props, and really like the performance. They look cool, too :) I'm apprehensive about taking off in M mode, though. I always use Normal mode to get airborne, then switch. Would love to see a short tutorial on your procedure.
When you mentioned it was probably from crashing.... that crash was the one I was thinking of! 😂 But the frame didn't crack!!
Yeah... I think that was the crash that did it. I was getting a GPS module error when I tried to fly it again a week later.
I gave up on Master Airscrew when I purchased the props for my Air 2. They weren’t enough of an upgrade to justify flying with them. Possibly voiding my care refresh. They also felt flimsy.
I used the Master Airscrew props for my original Air and was happy with the product. They definitely made a difference in the noise pitch.
I’ve heard nightmare stories with the foldable Phantom 4 Pro Master Airscrew props. One of my boys received a notification and the P4P quickly fell out the sky. He didn’t have time to react. One of the props failed. Those props required a little more assembly to install so Master Airscrew never took accountability for that disaster.
I had purchased those foldable props for my P4P as well but after hearing what happen I decided to not install them.
So now I just avoid that brand altogether.
How did you get good at manual mode?
I practice on a simulator. Liftoff
You crashed and blame the propellers? How did you arrive at that conclusion? Why is your video so blurry?
I did not blame the crash on the props. Watch the video and listen.
I didn’t see the crash
Yah, Chad. I’m curious about prop options for the noise issue, so thanks for exploring it. I super like your video style! Glad I found your channel. 🙏🏽
Thanks, and welcome to the channel.
This is so insanely cool. Wow.
I decided also in staying original DJI props. Just did not like the stiffness and also did not like the sound. Thanks for sharing!
I would love to have an Avata I think anyways. Your opinion is always accepted and taken into consideration. Thank you for all the great information
I don't have a Avata but do have an air 2s and mavic 3 classic. I definitely notice a pitch change with the master air screw but both drone sets of blades eventually start to loose balance and tend to shake the rear arms even just sitting on the ground with the props going. The air 2s was even slightly moving towards the left just sitting on my driveway. I always wonder if the shaking will eventually put stress cracks in parts of the rear arms. I have gone back to the stock props but definitely notice the buzzing sound difference with the standard props.
Camera is very good on this thing
Yeah...its pretty decent.
I just added these 4 blades to mine and got my first set of scratches due to one prop breaking off. Sent the drone immediately into the ground. Im going back to the oem ones.
What do you recommend to buy DJI Air 2s combo or DJI Mavic 3 classic basic?
Very nice Chad 🦾👊🏻
I spent about $5,000 on this DJI grrbage and never made a single dime off it.
Things they don't tell you.
Don't waste your time or money, it's a r1p0ff. Nobody is going to pay you to fly an RC toy around the sky, any more than they'd pay you to drive an RC truck around on the ground.
Chad! What camera angle do you fly with on the avata? Im going to fly mountains, ridge lines, beaches etc no race courses...just trying to figure the best angle?
I normally fly between 15 and 20 degrees
@@ChadB great!!!! Thanks!!!
I've never flown a drone before. I'm curious, the view through the goggles, do you get a sense of 3D dimensionality similar to an Oculus VR system or is it like looking at a flat image/screen?
Not 3D, but more like sitting in an IMax theater.
Doing such a thing would require either a stereoscopic camera on the drone, or another form of depth perception (like a depth camera on the drone or AI depth reconstruction in the headset). There's a few technological challenges to doing that.
Haven't seen such a thing with drones yet. FPV is still in 2D but it's still much more immersive than looking at a screen.
Thanks for the review
Chad
I watched you fly in this video and have absolutely come to the conclusion that you are absolutely ready for a five inch fpv. Grab one and you’ll never fly that avata again. Just make sure to get a remote that isn’t that little grey dji one, it sucks. Grab a remote with full gimbals. The throws on the dji one are too short. The other dji(black one) is awesome. But it won’t work with goggles2. Will with the v2. Confusing, I know. But trust me, you’re ready, and it’s night and day. You will love it.
Thanks. I am looking into getting a 5 inch now
Had the same issue today with Master Airscrew 4 blades props. Very smooth crash trying to hit a gap and the prop just broke in two peaces...Going back to stock props for now
Yeah... the props for rhe Avata need to be more flexible. Thanks for the comment. Please Share if you can.
Great video Chad and good to hear your opinion on the props. Just ordered the googles and hand control for my Mini 3 Pro. Many thanks for sharing the info :)
Thanks Shaun. Happy flying... Enjoy
Days after your first review of the Master airscrew propellers I ordered the 4-blade propeller for the Avata because I liked your tests. And with the guarantee that from my own experience this brand has a good product that really works very well for the Mini 3 Pro :(
Yeah.. they work well on Avata when flying. But not durable enough for when it crashes
Awesome flight.
Thank you
Nice flying Chad and thanks for the Master Air Screw Props update.
You're welcome. Thank you.
How'd you do these intro special effects
A lot of YT learnind and practice...lol. I use a combination of Final Cut Pro and After Effects.
I've been flying drone for a while now I must own about 20 to 30 of them. I own 3 DJI drones. The Mavic the FPV and the Avada.
One that I'm trying to get more flight time on is my new Nazgul F6. There are a lot of nice drones on the market. I love my DJI drones but I think you'll do fine no matter what you do. Go ahead take the plunge you're ready