Antes la gente para probar las baterías usaba un cable en un borne y tocaban el otro, esto dañaba severamente los bornes. Hoy en día se usan probadores que son básicamente 2 pinzas conectadas a un aparato llamado multimetro, hay digitales o analógicos pero ya no hay tantos de los analógicos por su antigüedad
We have a golf cart sitting that has 4+ battery’s that cost over 400+ a piece oem; and this actually will help because for some reason every once in while the post short and melt away or down into the battery(has happened twice) but my dad hasn’t figured a way to repair without replacing the whole battery this could aid in my case🙏
Oh, we have plenty of lead around here 😉 . Lots of f22s and f 35s. And ALOT more that they won't tell you about!!! how is life livingunder comrade putin's dictatorship? @alexandrbelousov154
If only batteries were still made like they used to be. I've heard stories of old farm trucks from the 40's that had the same battery for 30-40 years. Top it off with distilled water and it's good to go.
My 2017 tacoma never had any issues with the battery in the 6 years I owned it. It went through the Texas ice storms, plenty of sweltering Texas summers, and nothing. I traded it in for a new f150 and it's already sending me notifications on my phone to take it for longer drives to recharge the battery and that remote functions are disabled. Nothing was ever disabled, so I'm not sure if it's just a faulty notification or what, but the point still stands. Love that 5.0 anyway.
без разогрева основания , остатков клеммы! спайки не происходит , так называемая " ложная пайка" , прилипает но не припаялась !😢, держится на саморезе( ах) в итоге рано или поздно отвалится ! приваривают с помощью графитового электрода , от батарейки ( солевой) или от кинопроектора ( были такие )
Most people do this without the screws. How long do you think those will last? However If the new lead is hot enough it will bond to the existing lead.
Это неправильно, а делают иначе, зачистил клейму возьми сверло на 3 мм, берёшь ,самый толстый саморез и выкручиваеш до конца сверления, выкручиваеш одеваеш втулку и заливаеш свинец, и она при нагреве не выпадает.
Да, со временем стартер будет крутить всё хуже и хуже(изза такого ремонта клеммы). По неопытности могут поменять стартер, ничего не изменится. . Поменяют аккумулятор и всё будет ничтяк😊
Именно этот акб слабенький 50_ка и старый там любой ремонт подойдет да и как правило в легковушках клемы не горят никогда А вот в грузовых120+ таки будет как вы говорите
About 20 years I used to repair 2 to 3 a week customers damaged terminals. People are more careful and use proper tools now, cheap and easily available now.
@@pincheRojoX4lol the only reason batteries in third world countries last longer is bc they are barely used. Most people are way too poor to even afford a car to put a battery in let alone gas to power the car.
@@pincheRojoX4 When I first got my truck, the first battery literally lasted 5 years. I was so disappointed when every battery since then has lasted MAYBE 2..lol
I've never had a damaged battery head in over 50 years, and I've had a fleet of over 200 batteries on the road at minimum. 😂😂😂😂😂😂 Someone isn't doing something right.
You can actually melt the base of the terminal and then melt a lead stick on top of it using a torch instead of using the screws which are as good conductors.
Dnd cada nada esten sacando la bateria,se daña De oaso el Plomo no logra fundir la base y por alli queda Escapando Acido y Gases,,cuando esta en funcionamiento. Yo reparo Baterias ( acumuladores )
I did that on elcaminos battery when i was 18. My granpa told me what to do after i broke the post on my battery. So i used my torch and neighbors lead he used for bullets and a brass ring to rebuld the post. Now it wasnt that clean at first. And I had to clean it up, but I got it to where you couldnt tell it wasnt the original.
I had a battery explode inches from my face. It was very unpleasant ! God smiled on a fool and the top of the battery case struck me, keeping most of the acid out of my eyes 😮
Gotta laugh at all these "Experienced people" saying this is bogus or have never seen a need for this. ANYONE that has an electric winch, battery powered trailer hoist, or anything that feeds to the battery outside of direct ignition power has at least once melted the negative post on a battery. I have done this probably 20 times winching someone out of a snowdrift and overheating a motor solenoid on the winch and causing a backsurge to the battery. I have used a 9/16 lag bolt into the heart of the negative stump and wrapped the cable around it. Melting lead for a new post is a cool idea. Actual men that have actually worked know this can happen and appreciate this idea.
@@nishbrown Is that comment supposed to mean something? I assume you are saying you are incompetent and have never operated equipment and have no understanding of what we are talking about?
Всякое бывает, бывает у чела один аккум на два или даже три авто, и клемма просто изнашивается, бывает на проводе непонятно из чего наконечник разъедает, по всякому )))
За рулём, на легковой? Слышал, про такое, тяжёлая техника, спецтехника, грузовые авто, нет? От вибрации клеммы ослабевают, и их плавит или срезает как сваркой. Я работаю на трубоукладчике 60 тонн вес машины. При каждом перегоне, клеммы протягиваю. Не уследишь, при заводке двигателя, клеммы срезает.
@l3138 i didn't say it did but some people assume that battery's only last so long yet you can actually get a lot more life out of them if you do your research and properly use them
@@jekajackson2613 Желания спорить нет. За последние полвека. Просто менял. А с такой пенсией.!!?? Вил Отец в наследство много оставил. Пойду и отберу.!!
Amazing with finish product the battery post base was nice and flat with top of the post rounded. Do know these post posts can be removed counter clockwise to be replaced with new post. Not supposed to puncture a car battery in any way even drilling. OP just replaced the post with new one.
I have seen people do this zero times. They all just buy new batteries. Now I understand there may be times when you can't buy a new battery and a shark just bit off your terminal, but when that happens, I will fly my private jet from my personal runway next to my 4 story mansion and find this guy to tell him.....oh wait, you didn't know? Yeah, I'm going to win the lottery before I ever have a need to do this shit.
Only a loose battery terminal can cause the damage on battery posts but there are a ready screw on posts in the market which is easier and better solution for repairing.
This is useful because people are always sawing the tops off of my battery post just to be jerks.
😂😂😂
Lmao
😅😅😅
In fairness a coworker got a bit cranky and kicked a battery the other day, it did somehow manage to snap the terminal off, so they do break off
😂😂😂😂😂
In all fairness, its possible to twist the terminal off if you try to remove it without loosening it
brother is solving a problem that never even existed
Looks like using this from 1948 on everyday basis..? 🤔
Antes la gente para probar las baterías usaba un cable en un borne y tocaban el otro, esto dañaba severamente los bornes. Hoy en día se usan probadores que son básicamente 2 pinzas conectadas a un aparato llamado multimetro, hay digitales o analógicos pero ya no hay tantos de los analógicos por su antigüedad
😂😂😂
Looks like it keeps happening to him too??
We have a golf cart sitting that has 4+ battery’s that cost over 400+ a piece oem; and this actually will help because for some reason every once in while the post short and melt away or down into the battery(has happened twice) but my dad hasn’t figured a way to repair without replacing the whole battery this could aid in my case🙏
Thank you! I just recently cut off my post accidentally, now I know how to repair it with the extra molten lead I have laying around.
У тебя нет свинца? Для нас мальчишек из России найти его было делом нескольких минут 😂
Show
😂😂
Camping stove and some shotgun shells, my dude
Oh, we have plenty of lead around here 😉 . Lots of f22s and f 35s. And ALOT more that they won't tell you about!!! how is life livingunder comrade putin's dictatorship? @alexandrbelousov154
I hate when my battery post grinds down to nothing. Thanks for the vid I’ll use this every other week when I need it 😮💨
If only batteries were still made like they used to be. I've heard stories of old farm trucks from the 40's that had the same battery for 30-40 years. Top it off with distilled water and it's good to go.
Literally 10/15 years ago
de sulfate it I've been on the same battery that's marked 2017
My grandfathers 64 beetle had same 6 volt battery in until he passed away in 93 I have to buy a new battery almost every 5 yrs crazy
My battery never last long enough to worry about this. They still look new when the battery is junk after only a year.
Cuz the acid in your battery is trash. Change the acid with a good one and you will get a long lasting battery
Keep it fully charged at all times and it will last longer than 5 years. Assuming you have a sealed battery rated to last up to 60 mos.
Glass gel batteries are the right choice 😎
I’ve had batteries last longer than 5+ years!
My 2017 tacoma never had any issues with the battery in the 6 years I owned it. It went through the Texas ice storms, plenty of sweltering Texas summers, and nothing. I traded it in for a new f150 and it's already sending me notifications on my phone to take it for longer drives to recharge the battery and that remote functions are disabled. Nothing was ever disabled, so I'm not sure if it's just a faulty notification or what, but the point still stands.
Love that 5.0 anyway.
без разогрева основания , остатков клеммы! спайки не происходит , так называемая " ложная пайка" , прилипает но не припаялась !😢, держится на саморезе( ах) в итоге рано или поздно отвалится ! приваривают с помощью графитового электрода , от батарейки ( солевой) или от кинопроектора ( были такие )
Для трактора пойдет)
هاي العمليه اشكد سويته من كنت ساىق بلجيش ومن نجحة
Most people do this without the screws. How long do you think those will last? However If the new lead is hot enough it will bond to the existing lead.
Это неправильно, а делают иначе, зачистил клейму возьми сверло на 3 мм, берёшь ,самый толстый саморез и выкручиваеш до конца сверления, выкручиваеш одеваеш втулку и заливаеш свинец, и она при нагреве не выпадает.
@@richardchambers256 если нижнюю часть обезжирить , то приваривается , а так сомневаюсь что будет долго держаться.
I love this. All my excess molten metal laying around will come in handy.
It’s led
@@gregspoks6545lead *
@@gregspoks6545 Lead is a metal.
@@gregspoks6545it’s lead
Sigh, lead.
Never in my life have I seen a battery post in need of this
It's because it came out of the junkyard.
Me either….
Only when idiots bang on the terminal 😅
Nope, and if your battery is this toast it’s probably time to get a job to buy a new one.
And neither had the maker of this video, until he hacked one off himself.
This video save my entire family
Thank god you are all OK! This video should be mandatory for all families to watch.
Wow!! A solution for a problem that doesn’t exist. What a great time to be alive.
Now if it does you’ll know what to do to fix it,that’s if you live long enough to see a problem like this?
@@raymondomit6386indeed 😅
Seeing the battery flex as he drills is concerning 😂😂😅
Yeah I bet that battery turned out to be a manufacturing defect and repurposed for demonstration purposes. Lmfao 😅
I bet you are the first and only person in the universe that has done this. You are a one of a kind.
Nothing is more important than new terminals on a dead battery
😂😂
This is very helpful considering I take my battery heads off all the time and forget where I placed them.😂😂
Мне очень нравится, когда человек показывает "работающий лайфхак" с кучей инструментов и не имея элементарной биты под данный тип самореза
А зачем?
Мы на работе такие саморезы болтом (винт) м10 с головкой под шетигранник крутим! Биты эти постоянно теряются, а болтов у нас целый ящик!
Cuidado com as faíscas perto da bateria. O gás expelido pela bateria é hidrogênio, altamente explosivo
Oralea
I always refer to this video when I have a broken battery head to repair !
😂
*post
@@L118aKev Yep but look at the title
😂😂
haha thats funny
Guys, guys, EASY! We'll need this video for the apocalypse.
Вот так и на продажу.😅😅😅 Всё новое это хорошо забыто старое, приходилось делать на трассе чтоб доехать...
Наплавка должна быть угольным электродом а это решение выхода из аварийной ситуации
Да, со временем стартер будет крутить всё хуже и хуже(изза такого ремонта клеммы). По неопытности могут поменять стартер, ничего не изменится. . Поменяют аккумулятор и всё будет ничтяк😊
😊😊
😊😊😊😊😊😊😊😊😊😊😊
Именно этот акб слабенький 50_ка и старый там любой ремонт подойдет да и как правило в легковушках клемы не горят никогда
А вот в грузовых120+ таки будет как вы говорите
Совершенно ничего не изменится ...
About 20 years I used to repair 2 to 3 a week customers damaged terminals. People are more careful and use proper tools now, cheap and easily available now.
I hate when my battery terminals are mysteriously sawn off when i return to my car in the morning, gonna keep this in my back pocket
Sweet fix. Classic 😮
Hate it when battery posts randomly get up and walk away but at least I can do what this guy does after
Эта схема не работает поверьте, испытано лично, чють компьютер не сжёг на грузовой Вольво
На "вольво" такие штуки нельзя делать это только для колхоза. Для трактора.
Незнаю, тоеты, ваги, ездят и радуются.
Это только для Пакистана, ну или дома
А мог ведь и всю Вольво спалить, если подумать
Как с этим связан компьютер? Не понятно
Then he realised the battery needed to be replaced.😂
thanks for the post my friend! ima need this when the battery head brakes
Ah, lovely clean addition to this battery. Only trouble is I think the battery itself has seen better days. It does look past it's best 😮
They are refurbishing the battery including rebuilding the core this is just one step
Batteries are actually one of the things we still make here and we do it very well. I have never seen this happen to a American battery.
Making sparks could make the battery explode im a mechanic i know i have seen it a few times
That's because american batteries die after a year or 2.
@@pincheRojoX4 LOL Vary true.
@@pincheRojoX4lol the only reason batteries in third world countries last longer is bc they are barely used. Most people are way too poor to even afford a car to put a battery in let alone gas to power the car.
@@pincheRojoX4 When I first got my truck, the first battery literally lasted 5 years. I was so disappointed when every battery since then has lasted MAYBE 2..lol
I've never had a damaged battery head in over 50 years, and I've had a fleet of over 200 batteries on the road at minimum. 😂😂😂😂😂😂 Someone isn't doing something right.
Thank you
They ground off the battery post to make a vid. People will do anything for attention.
Согласен. Не встречалось такого.
The old battery is junk and the post melted for a reason
You obviously haven’t worked with toro batteries
Just like adding rebar to cement
My battery post just randomly fell off the other day. Thanks for the DIY
Надо это делать угольным электродом. Чтобы спаять вместе.
No sé puede, se calienta la batería
Si se puede. Yo lo hago@@Alvaro-lo7er
Остерегайтесь подобных мастеров.
@@arbimerzuev они кусаются
@@crime_dudeОни делают туфту.
Писюн можно сделать😂
Solo para salir del paso, supongo.
Es solamente por un tiempo, unos 4 años más esa batería 🪫
Oh, heck yeah! I have a molten lava factory in my garage to fix every battery like this
É chumbo
you can melt metal easily with basic tools
It’s lead not tungsten
It's just lead, it melts like super easy
The hero we never knew we needed.
You can actually melt the base of the terminal and then melt a lead stick on top of it using a torch instead of using the screws which are as good conductors.
India is a real place folks 🤣
That battery looks like it's over 5 yrs old......get a new one 😂
No, it will be reassembled to be a new
In those countries they recondition them after screwing the goat.
New battery. Craigslist
You can’t go to the parts store to get a battery, until the car starts
Step 1 - Buy another battery to install.
Step 2 - Recondition , charge and store old battery.
Step 3 - Repeat process when needed.
Это все шляпа правильно паять графитным стержнем
Я думаю, почему лучше не сверлить несколько отверстий по диагонали хаотично сверлом в 2-3 мм? Я думаю так лучше будет.
Купи новый ак будешь ставить экспереметы с пайкой сгоришь
Thanks, might come in handy
Meanwhile, somewhere in India 😂
Dnd cada nada esten sacando la bateria,se daña De oaso el Plomo no logra fundir la base y por alli queda Escapando Acido y Gases,,cuando esta en funcionamiento.
Yo reparo Baterias ( acumuladores )
That’s pretty damn good! Hell yeah!!!🤙
I did that on elcaminos battery when i was 18. My granpa told me what to do after i broke the post on my battery. So i used my torch and neighbors lead he used for bullets and a brass ring to rebuld the post. Now it wasnt that clean at first. And I had to clean it up, but I got it to where you couldnt tell it wasnt the original.
I’m afraid watching crap like this is going to deplete what brain cells I have left.
Don't watch then,repaired many burn posts like this
Much improvement from last videos, now they are perfect👍
This will be helpful in 10000 years thanks
Если уже такое произошло, то нужно покупать новый и сразу!!! Сколько бы ни стоил и надежной фирмы!!!😊
КРУТЕ життя не легке… смотри ответ в первом коменте!!!
اللحام لن يصلح ماهي إلا بضعة إيام ويتلف
الجزء السفلي بارد كان عليك تسخينه او وضع رأس مكوات ساخن على السطح قبل صب اللحام كي يتماسك جيدا
هل من الممكن اصلاح بطارية الجل ستار ستب
@@ahmedalnazer-o5c
هنالك العديد من الفديوهات على يوتيوب تشرح طريقة ذالك
I wouldn't recommend all those sparks around a battery, they've been known to go boom😂
B.T.D.T.
I've had two blow up, one in my face while jump starting another vehicle. All it takes is ONE spark!!!
You’re kidding right?
I had a battery explode inches from my face. It was very unpleasant !
God smiled on a fool and the top of the battery case struck me, keeping most of the acid out of my eyes 😮
Gotta laugh at all these "Experienced people" saying this is bogus or have never seen a need for this. ANYONE that has an electric winch, battery powered trailer hoist, or anything that feeds to the battery outside of direct ignition power has at least once melted the negative post on a battery. I have done this probably 20 times winching someone out of a snowdrift and overheating a motor solenoid on the winch and causing a backsurge to the battery. I have used a 9/16 lag bolt into the heart of the negative stump and wrapped the cable around it. Melting lead for a new post is a cool idea. Actual men that have actually worked know this can happen and appreciate this idea.
Might as well drop the mic.
Might as well out yourself as incompetent.
@@nishbrown Is that comment supposed to mean something? I assume you are saying you are incompetent and have never operated equipment and have no understanding of what we are talking about?
@@skinnyman-rv1xi might as well make an intelligent comment that actually means something. What exactly are you babbling about?
@@paspuniak You only have to be smarter than the battery, son.
Не делайте так! Обратите внимания на корпус АКБ он деформируется . Идея хороша, нужно использовать сверло перед этим, и какой либо фиксатор резьбы.
Поздравляю ,через два месяца шурупы съест электролит и кнаплавленая клейма отвалится 100%😂
🤦
Buena. hidea. Amigo. Sy. Señor
Шняга не прокатит
Réparation soviétique sur les vieux chars . 😮😮 😅😅😅😅😅😅😅😅
El electrolito no tiene contacto con el metal puesto.
20 лет за рулём и не разу не было проблем с клеммой аккумулятора. Что вы с ними делаете, а?!
😂😂😂
Всякое бывает, бывает у чела один аккум на два или даже три авто, и клемма просто изнашивается, бывает на проводе непонятно из чего наконечник разъедает, по всякому )))
@@jj07jj21
Ага, три авто и один аккумулятор. Он ещё и комплект колёс перекидывает
За рулём, на легковой? Слышал, про такое, тяжёлая техника, спецтехника, грузовые авто, нет? От вибрации клеммы ослабевают, и их плавит или срезает как сваркой. Я работаю на трубоукладчике 60 тонн вес машины. При каждом перегоне, клеммы протягиваю. Не уследишь, при заводке двигателя, клеммы срезает.
@@Алекс-ч7э4ю на видео явно аккум не более 100А. Что им можно завести? Максимум Газель.
That second screw destroyed that battery
No it didn’t
It looked like it expanded( probably broke) the inside of the battery
He places the template perfectly on the battery....
This works. I had to resort to this method after the wrecker service connected to my battery head to tow my vehicle.
Das ist nicht schlecht aber bitte messingschrauben nehmen
Через пару дней всё окислится, и будешь срезать эту клему.это всё фуфло.
Oxidar chumbo?
Oxida o braçadeira do cabo porque fica vazando vapor da bateria
burak
You are a foolish person!
Quel lavoro non va bene ...le viti si ossideranno e l'ossido si mangera l'elemento....ho parecchia esperienza in merito
@@consolatovitetta966 да пута мадре
I have all these tools. Awesome.
How you sealing the bottom of that?
Это не восстановление. Это профанация!
If the battery is as old as it looks, it’s probably not worth fixing
In poor countries they don’t have a choice but to rebuild old batteries.
Some people dont realize that some battery's actually require to add water and this will actually give them a longer life use
Has nothing to do with this.
@l3138 i didn't say it did but some people assume that battery's only last so long yet you can actually get a lot more life out of them if you do your research and properly use them
@@l3138 of course it does
At what point do you not just buy a new one
ever see a spark cause a battery to explode
Так делать нельзя 😮 саморезы сгниют. Это позор. восстанавливать только чистым свенцом
Либо новым аккумулятором 😂
Саморез из свинца.?? Может медный или бронзовый.??
@@СергейДьячков-ц7н тебе же сказали - свенцом ))
@@jekajackson2613
Желания спорить нет. За последние полвека. Просто менял. А с такой пенсией.!!?? Вил Отец в наследство много оставил. Пойду и отберу.!!
Свянцом
No hace falta😊😊😊
Quant les bornes sont dans cette état le reste est pareil!
Amazing with finish product the battery post base was nice and flat with top of the post rounded. Do know these post posts can be removed counter clockwise to be replaced with new post. Not supposed to puncture a car battery in any way even drilling. OP just replaced the post with new one.
The battery has seen better days! I never seen a case that old!
The bulge in the plastic says otherwise
This is dangerous if you touch the other connection at the same time. Not worth it.
Dude no it's not. It'll make a little spark that's it. You don't know what your talking about bud
Great tip!
Great idea, but I would lay a wet rag over the battery so the sparks don't light it up.
En otros vídeos no le ponen esos postes de refuerzo muy buen trabajo 👌👍
I have seen people do this zero times. They all just buy new batteries.
Now I understand there may be times when you can't buy a new battery and a shark just bit off your terminal, but when that happens, I will fly my private jet from my personal runway next to my 4 story mansion and find this guy to tell him.....oh wait, you didn't know? Yeah, I'm going to win the lottery before I ever have a need to do this shit.
Looks great. Functional not so much. You have to get the lead in the post to start melting with a torch before pouring the new.
I like eating the battery terminal posts. That’s why this video is vital to my knowledge.
Yall just do everything but the right thing
Why was this so fun to watch
i'd use some stuff to make screws trashed and make em merge better cuz its not that good to have smooth surface with solder.
Nice looking repair job.
Bien meilleur que les autres que j'ai vu qui ne font que coller
well done on combining two dissimilar metals.
That's nice ths for the tip 🎉
Only a loose battery terminal can cause the damage on battery posts but there are a ready screw on posts in the market which is easier and better solution for repairing.
I love how he dried it at the end. Lmao.
American ingenuity at its best.
“Can I provide a service you don’t need?”
Good idea, but in this case, it’s a waste of time. This battery needs to be replaced. It has seen better days.
Without even a second thought this is got to be in the Philippines 😊
This video is so useful.
Well this is something... not useful, but it's something 😂
lol super useful cause we all have liquid aluminum laying around 😂
That's lead dude, you've gotta have at least a few fishing sinkers laying around or some shotgun shells or something.
Thanks for information 👍
I think the fact that your battery terminal got destroyed is a bigger issue than how you would repair it.