I'm glad there was some value there for you. I've actually recently changed some of my thoughts on my shot process. But either way the fun part about all of this is that it's so individual I'm not sure there is a true right and wrong! Thanks for watching.
Great breakdown bro! Do you relax your thumb and create a pull through motion/sensation? Or do you push your trigger with your thumb? If that makes sense
Thanks bro, I really appreciate your encouragement, To answer your question, I have to assume I’m already at the point of when I personally put my thumb on the trigger and have started my shot process in activating the actual release. I personally operate by applying pressure in all areas of my back side (shoulder elbow and hand) to activate my release. So I build tension in all those areas and when I feel solid about my pin float I speed the pressure up in my thumb to then activate the button. (I.E, punch it! 🥊) even though I'm not a fan of that terminology. Regarding the other method of activation (relax rotate thing) For me to maintain tension while try to relax one part of that system feels awkward and wrong. It feels like I’m trying to drive in two direction in my brain which I’m not. A fan of. So I try to maintain a steady flow of traffic mentally which to me is all tension! all go! which is calming for my brain. Also helps me hold way more steady. I think that’s because I can simplify my mental conversation in my head to “front to back” when the conversation flows in that direction I know its going to be a good shot.
I am trying the clicker, but I actually like your process behind the thumb barrel mental note. I am concerned with the clicker’s noise in a blind or stand. I may end up with a normal thumb button.
Question; Looking at your shoulders not being directly over your hips, do you think you might be a little long on your draw length? Or could it be the camera angle? Im stepping my mod down on my V3X 33 because they run about .5 inches long. Might play around with the Austins Archer NBS draw stops too for tweaking it as well.
Dude that’s a great question. I’m honestly not 100% sure. I can say with some certainty, that when I shoot on flat ground I don’t tend to be that far back behind my hips. With where I cut in the range behind my house, on a steady incline, but the target is still at eye level, so I tend to compensate with my body to maintain a stable platform. Almost feels like I’m shooting up hill when I’m shooting at 20yds. Other distances at closer to flat ground. I’m Not sure if that’s technically right but for me when I do that I can stay relaxed and focused on my upper body feeling spread apart rather then jammed up in my upper body which I don’t like. I actually tried the 31 draw at the shop on flat ground and I felt crazy tight in my upper body. So last thing and I’ll be done. Haha but I also have been messing with my d loop length a bit, especially with my string issues as of late. So who knows, maybe I went a bit long this time. I love a long d loop So to be honest, “I don’t know”, is my final answer. Just figuring it out one day at a time. And enjoying the journey.
@@walderman55 A journey it is indeed. There are so many tiny details that change our holds, our shots etc and dang I cant wait till all of that is sorted out because it can kind of mess with your confidence in your shot. Thanks for the content and the response. Great shooting
@@andrewfernandez8330 man thanks for your feedback. I appreciate your question. I like forcing my self to think through those details. It allows me to simplify it all after the details have been worked out. And man thanks for watching. It’s fun making it.
I'd always start with application. And go from there. not that I'm an expert. Just a few conversation and a lot of RUclips lol But that being said. What is your actual application going to be for the most part?
I use the Tru-Ball Goat. Medium. I prefer a smaller release. I feel that it locks in to my hand a bit better compared to the large. Not that you asked for the extra 😆
@@walderman55 I appreciate the extra! Lol. My First and only thumb release that I’ve shot is the Tru-ball Boss X which I love, but it’s more for tournaments, has a loud click when you fire and no wrist strap, so not ideal for hunting. So I purchased a Tru-ball Max Pro because it has the same frame with a wrist strap and no click, but I’m not able to get the trigger sensitivity where I want it. After punching myself in the face three times, I’ve decided to look for a different release. Lol. Might try a three finger. Any suggestions? Thanks! I subscribed to your channel, looking forward to your content.
@billymcmillen202 If you like the extra, I'll answer this question in full. But before I do, please remember I have limited experience since I'm still fairly new to the sport (about 4 years). I definitely think deeply about all the gear I've tried out but my scope of practice isn't all that big. That being said, if you like the Boss X I say keep it even with the lack of a wrist strap whole and the loud noise. My goat doesn't have a technical hole for a wrist strap but I put the rope through where the thumb button connects and it works like a charm. I actually made a video on the topic. "Why a thumb button is better" (Side note: The new Goat releases have holes in them for a wrist strap. But I have the older model). Regarding the noise, I have yet to have a deer jump my string or the click and I've harvested about 10 deer with it in the 2 years of owning it. So maybe I've been lucky but overall, it's been solid for me. Now if you want to get a new release because you want to try some stuff out that has a very nice trigger. I am also all for that. So if it's not clear, I am a big fan of the Goat of course and don't see myself switching from it. Every time I try something else I go back to it and fall in love. I also really like the triggers in the Stan Perfex releases if I am honest. And they have holes for a wrist strap built in if that is what you are looking for. However, the form factor is a bit too skinny for my hand so for long term use it doesn't sit in my hand exactly like I want it to. But that being said, they can get pretty sensitive and have a really crips break. Now, I waited to find the Stan on the used market for my wife. But it was a real upgrade from her other release. So long story short. - Tru-Ball Goat (newer model with the wrist strap connection. - Stan Perfex (heavy metal)
You are leaning back quite a bit. This is a less stable position than having your weight equally balanced over the feet. It takes effort and adds variables.
I love how archery is both physical and mental. If you're fatigued you won't shoot well and if your mind isn't right you won't shoot well either.
excellent stream of thoughts that carried a lot of meaning and valuable info!
I'm glad there was some value there for you. I've actually recently changed some of my thoughts on my shot process. But either way the fun part about all of this is that it's so individual I'm not sure there is a true right and wrong!
Thanks for watching.
Great breakdown bro! Do you relax your thumb and create a pull through motion/sensation? Or do you push your trigger with your thumb? If that makes sense
Thanks bro, I really appreciate your encouragement,
To answer your question, I have to assume I’m already at the point of when I personally put my thumb on the trigger and have started my shot process in activating the actual release.
I personally operate by applying pressure in all areas of my back side (shoulder elbow and hand) to activate my release. So I build tension in all those areas and when I feel solid about my pin float I speed the pressure up in my thumb to then activate the button. (I.E, punch it! 🥊) even though I'm not a fan of that terminology.
Regarding the other method of activation (relax rotate thing) For me to maintain tension while try to relax one part of that system feels awkward and wrong. It feels like I’m trying to drive in two direction in my brain which I’m not. A fan of. So I try to maintain a steady flow of traffic mentally which to me is all tension! all go! which is calming for my brain. Also helps me hold way more steady. I think that’s because I can simplify my mental conversation in my head to “front to back” when the conversation flows in that direction I know its going to be a good shot.
Great content William!
Man thank you! I appreciate that!
Love the video.
Thank you! I appreciate it!
Whoa great vid. Thanks
Thank you. I hope it helped you in some way for sure.
Just found the channel! Love the content and what you bring as far as personality! Subbed!
Dude thanks man! I definitely appreciate that. It's definitely fun to make the videos.
I am trying the clicker, but I actually like your process behind the thumb barrel mental note. I am concerned with the clicker’s noise in a blind or stand. I may end up with a normal thumb button.
Question; Looking at your shoulders not being directly over your hips, do you think you might be a little long on your draw length? Or could it be the camera angle? Im stepping my mod down on my V3X 33 because they run about .5 inches long. Might play around with the Austins Archer NBS draw stops too for tweaking it as well.
Dude that’s a great question.
I’m honestly not 100% sure. I can say with some certainty, that when I shoot on flat ground I don’t tend to be that far back behind my hips. With where I cut in the range behind my house, on a steady incline, but the target is still at eye level, so I tend to compensate with my body to maintain a stable platform. Almost feels like I’m shooting up hill when I’m shooting at 20yds. Other distances at closer to flat ground.
I’m Not sure if that’s technically right but for me when I do that I can stay relaxed and focused on my upper body feeling spread apart rather then jammed up in my upper body which I don’t like.
I actually tried the 31 draw at the shop on flat ground and I felt crazy tight in my upper body.
So last thing and I’ll be done. Haha but I also have been messing with my d loop length a bit, especially with my string issues as of late. So who knows, maybe I went a bit long this time. I love a long d loop
So to be honest, “I don’t know”, is my final answer. Just figuring it out one day at a time. And enjoying the journey.
@@walderman55 A journey it is indeed. There are so many tiny details that change our holds, our shots etc and dang I cant wait till all of that is sorted out because it can kind of mess with your confidence in your shot. Thanks for the content and the response. Great shooting
@@andrewfernandez8330 man thanks for your feedback. I appreciate your question. I like forcing my self to think through those details. It allows me to simplify it all after the details have been worked out.
And man thanks for watching. It’s fun making it.
@@walderman55Get with a measuring arrow at a range or shop to definitively find out.
Tension and direction.
I like that! That's great way to out it. I'm going to keep that!
Nice shots 🙌
Thanks man. Been working on it a lot.
What length of stabilizer would you recommend for Halon X comp. New shooter(9 months)
I'd always start with application. And go from there. not that I'm an expert. Just a few conversation and a lot of RUclips lol
But that being said. What is your actual application going to be for the most part?
🔥🔥
✊🏾
💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
✊🏾💪🏾✊🏾💪🏾
What release do you use?
I use the Tru-Ball Goat. Medium. I prefer a smaller release. I feel that it locks in to my hand a bit better compared to the large. Not that you asked for the extra 😆
@@walderman55 I appreciate the extra! Lol. My First and only thumb release that I’ve shot is the Tru-ball Boss X which I love, but it’s more for tournaments, has a loud click when you fire and no wrist strap, so not ideal for hunting. So I purchased a Tru-ball Max Pro because it has the same frame with a wrist strap and no click, but I’m not able to get the trigger sensitivity where I want it. After punching myself in the face three times, I’ve decided to look for a different release. Lol. Might try a three finger. Any suggestions? Thanks! I subscribed to your channel, looking forward to your content.
@billymcmillen202 If you like the extra, I'll answer this question in full. But before I do, please remember I have limited experience since I'm still fairly new to the sport (about 4 years). I definitely think deeply about all the gear I've tried out but my scope of practice isn't all that big.
That being said, if you like the Boss X I say keep it even with the lack of a wrist strap whole and the loud noise. My goat doesn't have a technical hole for a wrist strap but I put the rope through where the thumb button connects and it works like a charm. I actually made a video on the topic. "Why a thumb button is better" (Side note: The new Goat releases have holes in them for a wrist strap. But I have the older model). Regarding the noise, I have yet to have a deer jump my string or the click and I've harvested about 10 deer with it in the 2 years of owning it. So maybe I've been lucky but overall, it's been solid for me.
Now if you want to get a new release because you want to try some stuff out that has a very nice trigger. I am also all for that.
So if it's not clear, I am a big fan of the Goat of course and don't see myself switching from it. Every time I try something else I go back to it and fall in love. I also really like the triggers in the Stan Perfex releases if I am honest. And they have holes for a wrist strap built in if that is what you are looking for. However, the form factor is a bit too skinny for my hand so for long term use it doesn't sit in my hand exactly like I want it to. But that being said, they can get pretty sensitive and have a really crips break. Now, I waited to find the Stan on the used market for my wife. But it was a real upgrade from her other release.
So long story short.
- Tru-Ball Goat (newer model with the wrist strap connection.
- Stan Perfex (heavy metal)
You are leaning back quite a bit. This is a less stable position than having your weight equally balanced over the feet. It takes effort and adds variables.
Good looking out man.
@@walderman55 No problem. It can be an easy habit to fall into and not notice. :)