That's it! I'm off to buy a drill press, a grinder, wood-turning lathe, portable welder and lots of little extras.....nah, I'll buy a BBQ instead and save a fortune....
@@terrysmith4465 because gasses can still be trapped inside the tank only way to completely empty all the gasses is to flush them out. If you get one that holds the gas in it will explode. This has happened many times and has caused serious injuries.
DO NOT CUT THROUGH A GAS TANK, unless you are 110% positive that ALL gas has been expelled. Best to remove the valve SLOWLY, and fill with water to overflowing BEFORE cutting the tank.
Purge out all propane using American Welding Society procedures by pushing out by filling with water then pouring out, etc. Water in electric tool can get you electrocuted.
Great video! But unfortunately only a seriously experienced person with the right equipment can make something like this. 90% of those tools used, your average person will never own. It’s cheaper and safer to just buy something similar. Besides that, it’s absolutely brilliant.
It's a shame they don't come up with something off the shelf that could work the same way and not involve me buying a welder, lathe, grinder etc 🤔🤔🤔 ...
Very beautiful . But I have a request, which is to make a video about alternatives to some equipment, for example, soldering iron tools. Is there an alternative available to everyone? Or making things without soldering
Use alternative types of fastening means such as mechanical fastening means (for example: nuts and bolts, or screws and etc) or adhesive fastening means (glue, jb weld, resin, liquid nail, and etc)
That's it! I'm off to buy a drill press, a grinder, wood-turning lathe, portable welder and lots of little extras.....nah, I'll buy a BBQ instead and save a fortune....
I couldn't have said it better. 🤣🤣🤣🤣🤣
Anyone looking to do this PLEASE make sure you FILL up the tank with water before starting to cut.
Why
@@terrysmith4465 because gasses can still be trapped inside the tank only way to completely empty all the gasses is to flush them out. If you get one that holds the gas in it will explode. This has happened many times and has caused serious injuries.
@@terrysmith4465 vapour of gas + air + grinder sparks = explosion 💥
Bye 😂
Just remove the valve first. The tank in the video isn't a propane tank either.
DO NOT CUT THROUGH A GAS TANK, unless you are 110% positive that ALL gas has been expelled.
Best to remove the valve SLOWLY, and fill with water to overflowing BEFORE cutting the tank.
Just run a bead. you will get a better weld and you will give your editor a break.
Guess we’re gonna have to learn to build our own grills after there all banned
Great video, great design, but I'm most surprised by lighting a BBQ with one piece of paper. What is this voodoo?
Remember, in the UK, that you don't own the gas tank. You are only renting it. Doing this would be regarded as theft by the owner of the cylinder.
You can get one anywhere
Spend $1k on tools. Can't wait to start
That's pretty cool I love it wow those are some cool ideas on a portable grill ❤
Purge out all propane using American Welding Society procedures by pushing out by filling with water then pouring out, etc. Water in electric tool can get you electrocuted.
Like your skill you go boy.🎆
Superbly excellent...👍🏾👍🏾
Waaaaay to much work for a barbeque grill. There are far more simpler methods.
Great video! But unfortunately only a seriously experienced person with the right equipment can make something like this. 90% of those tools used, your average person will never own.
It’s cheaper and safer to just buy something similar.
Besides that, it’s absolutely brilliant.
U can buy one that size for 20 bucks at Wal-Mart in 5 minutes
Because we all have those tools around the house. Paint, torches, drills etc. ok
No thanks haha way to much work and dangers
Anyone know what paint stripping spray used here?
What is the paint remover used here?
It's both illegal and highly dangerous to do this.
Tutorial for the Darwin Award 2023 😅
It's a shame they don't come up with something off the shelf that could work the same way and not involve me buying a welder, lathe, grinder etc 🤔🤔🤔 ...
walmart sells them sh*ts for life 19.99
Best part is, ya find out REAL quick if your gas tank is completely empty!
Eventually had to mute the video 😖
Best gas tank conversion I’ve seen on RUclips
What type of welder is that, mig? Tig? Why so little spark ?
Hi what welder are you using it looks neat and easy to use I hope
That looks like a refrigerant tank...
Very beautiful . But I have a request, which is to make a video about alternatives to some equipment, for example, soldering iron tools. Is there an alternative available to everyone? Or making things without soldering
Use alternative types of fastening means such as mechanical fastening means (for example: nuts and bolts, or screws and etc) or adhesive fastening means (glue, jb weld, resin, liquid nail, and etc)
@@AChi__ Thank you for the reply and clarification
Or make videos without 'music' that drives one nutz! :)
Good as always 😊😊
👍🏻👍🏻
Love this channel, if a person has mechanical, electrical abilities, you give great ideas. TY
Bevor ihr da mit der Trenn Scheibe ran geht füllt es voll mit Wasser damit jegliches Gas entweicht !!!
Explosion 💥 Gefahr !!
Thx 🙏
Nice,but anymore than 1 eating and your stuffed
Before cutting it make sure its completely full of propane 🎉