Cool idea... once again! Usefulness out of what would be waste for landfill(if not recycled in the 'normal' fashion). Good tutorial for those lacking ingenuity and needing step-by-step instruction... you should have been a teacher or professor my friend. Kudos, bravo!!
I made a smoker/grill out of 2 rims. Bottom rim is 16" and top rim is 15". Built the stand frame out of scrap angle iron and black steel pipe for legs. Used perforated steel for bottom and top racks and a lid off a old smoker. Runs right around 180°-200°F
Great job 👍 thanks for sharing! Make sure you let it cook by itself for a while... before you add any food, to burn away the chemicals... * I would try to add some intake holes
Muy buen trabajo una parrilla practica y para 2 personas que deseen comer un buen asado pero CON CARNE ARGENTINA, bastante caro pero siempre sobran unos pesos para el asado y chorizos Argentinos. Saludos desde Formosa (Argentina)
Awesome job for a small portable grill. Just to add to it, all you need is add a fire box to the side of it and a couple latches to the lid and you have yourself an indirect heated mini smoker!
Yes with handles that meet and screw in legs 3 of them for stability on an uneven surface , also a bolt on flu and a twist vent on the side do it all packs up into itself including fuel to burn,, just z suggestion no hate 👍😊
Nice Sun shine reclamation there.........................should have taken your testing manifold and discharged the remaining pressure into a 5 gallon bucket of water and you could have been just like the pros.......wow! Suprised the EPA hasnt knocked down you door yet......but then again they might not give a crap! Great video!
Nice grill but you should have heat cleaned it a time or two before grilling food. Also I agree with others that it needed a better grate for food..Otherwise nice job..
Yes it would help. I am thinking of making one of these but a double decker for like a smake take with you little smoker. Idk. Might be sik and legit. But never know until you try it.
This is funny, I worked at the place that made these cylinders, god knows how many we threw away (scraped) everyday. The funniest part is, that we also made portable grills at the same place. We made piggy-banks out of the cylinders if any of the workers wanted one. As a mater of fact, I still have one (same color blue) from 25 years ago when I worked there. lol.
what i was really hoping in the beginning that it was something new like making a padlock safe, or a mini faraday box to put phone walkie talkies, batteries and laptop idea, but when it was another bbq, all good though he still did a decent job,
EPA enters the chat... All refrigerants must be reclaimed before the tank is opened to the atmosphere and disposed of. Home and Gardens enters the chat... What a good re-purpose of an item that will be discarded. Please, no music next time.
Thats like a grill for one.. itd make a better lunch box.. or be a cool toolbox for your hvac stuff if you glued some foam in there and hollowed it out..
Greetings from Brazil! Try to rough the edge of the tank close to the hinges, as the lid will close better. Decrease the size of the grill to fit inside the grill.
I'd suggest adding in a fiberglass sealing strip along the bottom half of the bbq, that way it will seal up, and less chance of someone cutting themselves on the rim.
I'm gonna be nice and give everyone a tip. Because time is very valuable, before watching any RUclips video straight through, go look at the last minute and you might save yourself some valuable time!
Not to be a Negative Nancy, but I wonder if the cost of materials, electricity, and time were cheaper than just going to Lowes or some other vendor and buying one? I would also add that the grill makes it impossible to completely close the lid. If he had welded two angle pieces along the inside for the grill to rest on and then cut it to fit inside that would allow the lid to be closed fully. Then just weld a circular ring on the side of the lid with a movable ring to allow control of air being introduced into the grill.
or just sit around and pull yer pud watching people buy other peoples shit from storage eunuchs, I like the constructive criticism cause the ideas help for the next build, most people are all like this is what i woulda done, then do it there chiefy and lets see yours.
@@davids7209 I was just fuckin wicha, I'm an artist myself and people are always saying this is what I would have done, then you ask them what they've been doing and its mostly watchin t.v.and decreasing my intelligence quotient. I like to bust out one of my pieces and show 'em what I've been up doing . Well now, that is making me think I need to shut my pie hole and piss and produce , instead of talkin ca-ca, sorry pardner cause when I read your chingadera{commentary} I thought oh yeah that would make flush then wouldnt it . Sorry fer bein a pinche' vavoso. Vayo con dios, Amigo.
If U cut at the corner of top and lower part to become as a hole after joining both the parts to keep the roster grill perfectly than the upper part can cover nicely and also the grill can remove easily and yes, haldle should be of wood. Although video is 👍👍👍
What kind of welder and rods did you use? I have a bunch of these tanks, but someone said they are to thin, so you burn throufh them. I am not a good welder, so i would appreciate some feedback..briliant video. thank you!
Thanks for the video. I learned some things and I have five (5) of those tanks. I wanted to do some creative projects with them and this video gave me some great ideas. Thanks again.
Uhmmm freon is non flammable. If you do this with a propane tank or something flammable you will blow yourself to the next dimension. Always good to fill a tank with water first before you attempt cutting.
Thank you for placing a lense over your camera while welding. most people do not do so and even though save for the eyesight it makes videos hard to watch at that point
Great Idea and invention, but is there something wrong with the hinges? Why so hard tro move and does not seem to close all the way? are they to tight or some weld got in them? with those I expected the lid to slam shut on its own.
Next time instead of doing all that sanding, get some " EASY - OFF OVEN CLEANER .spray the tank completely and let set for about 7 to 10 minutes, hose it off with water ( just DONT get any water spray on you ) This WILL remove any and all paint and rust and save a LOT of time. I have cleaned an engine block down to the bare metal doing this.
People can buy a small gas grill for 20.00, or 25.00$,, but i know its fun to make your own! Helium tank for balloons is also ideal! A builder does not need a welder. Bolt the stuff together.
Hi wonder if you can help , few years back my fridge freezer broke down and I ended up storing it outside to keep garden bits in .. I’ve recently moved and it’s ended up here, so we cut the metal from the back and there was a smell of nail polish remover which I’ve found out was the gas .. It was outside about an hour and then put in the shed . Do you think the gas will be completely out of it now or is there away to remove the gas to make it safer ?
Cool idea... once again! Usefulness out of what would be waste for landfill(if not recycled in the 'normal' fashion). Good tutorial for those lacking ingenuity and needing step-by-step instruction... you should have been a teacher or professor my friend. Kudos, bravo!!
Thank you
Good job. Amazing how many people in the comments who could have done it better. Critics always gonna criticize. 😢
As a welder, I can not approve of this video and it’s vile content. Beyond that it’s an awesome idea and I really like the idea!
Just criticized others !!! Nice portable mini smoker . My Best from. Venezuela 🇻🇪
Nice , those handles I thought would look good for the legs ......
I remember being busy once.
I loved it.
Wow, beautiful design and ideas
I made a smoker/grill out of 2 rims. Bottom rim is 16" and top rim is 15". Built the stand frame out of scrap angle iron and black steel pipe for legs. Used perforated steel for bottom and top racks and a lid off a old smoker. Runs right around 180°-200°F
I made a rowboat/bar b que grill/ Birdhouse/Boom Box..from an old Navy Destroyer..nice work Mr DK.
Great job 👍 thanks for sharing!
Make sure you let it cook by itself for a while... before you add any food, to burn away the chemicals...
* I would try to add some intake holes
Muy buen trabajo una parrilla practica y para 2 personas que deseen comer un buen asado pero CON CARNE ARGENTINA, bastante caro pero siempre sobran unos pesos para el asado y chorizos Argentinos. Saludos desde Formosa (Argentina)
Awesome job for a small portable grill. Just to add to it, all you need is add a fire box to the side of it and a couple latches to the lid and you have yourself an indirect heated mini smoker!
👍👍
@@MrDKDIY yp0 no
Love it .. But too much work to cook a burger .. Build a smoker out of propane tanks ... Plus how many of us have a welder
It works, and I'm hungry ! 👍
Yummy, now you can have your barbecue with extra flavor of R-22 , goes down cool!
Awesome Idea!!! I have these laying around all the time. I`m going to have to make me one for next summer.
That's a great idea. I think I wana make one or 2. It makes me hungry to watch that man make one an then grilled meat
Yes with handles that meet and screw in legs 3 of them for stability on an uneven surface , also a bolt on flu and a twist vent on the side do it all packs up into itself including fuel to burn,, just z suggestion no hate 👍😊
Turned out nice. However, I have OCD!!! I would install trim around the cut to make the metal open and close onto a lip.
Nice Sun shine reclamation there.........................should have taken your testing manifold and discharged the remaining pressure into a 5 gallon bucket of water and you could have been just like the pros.......wow! Suprised the EPA hasnt knocked down you door yet......but then again they might not give a crap! Great video!
Nice grill but you should have heat cleaned it a time or two before grilling food. Also I agree with others that it needed a better grate for food..Otherwise nice job..
Tune in next week when I make a drinking cup out of a soup can.
Very nice job, Y la carne quedo deliciosa y olorosa,, asta aca donde estoy me dio el olor y el sabor, grasias por la comida, from N. Y.
It looks quite good... But, i questioned whether/ it may- or may not-need some small holes within the bottom container for air intake?!
Yes it would help. I am thinking of making one of these but a double decker for like a smake take with you little smoker. Idk. Might be sik and legit. But never know until you try it.
This is funny, I worked at the place that made these cylinders, god knows how many we threw away (scraped) everyday. The funniest part is, that we also made portable grills at the same place. We made piggy-banks out of the cylinders if any of the workers wanted one. As a mater of fact, I still have one (same color blue) from 25 years ago when I worked there. lol.
PS: these cylinders were 134 Forane refrigerant cylinders, made at Worthington Cylinders in Claremore, OK. and the color is called forane blue.
Great job. But it is safe to cook? What metal is that? I have a bunch of those tanks. Thank you.
what i was really hoping in the beginning that it was something new like making a padlock safe, or a mini faraday box to put phone walkie talkies, batteries and laptop idea, but when it was another bbq, all good though he still did a decent job,
Good god how many trips round the cylinders do we need?
YAY....
ANOTHER BBQ PIT VIDEO
EPA enters the chat... All refrigerants must be reclaimed before the tank is opened to the atmosphere and disposed of.
Home and Gardens enters the chat... What a good re-purpose of an item that will be discarded.
Please, no music next time.
Nice. I just found an orange freon tank on the side of the road and was wondering what to do with it.
Brilliant video thank you
Thanks
Thats like a grill for one.. itd make a better lunch box.. or be a cool toolbox for your hvac stuff if you glued some foam in there and hollowed it out..
Good for all, I like your idea of lunchbox 🙂
Greetings from Brazil! Try to rough the edge of the tank close to the hinges, as the lid will close better. Decrease the size of the grill to fit inside the grill.
Y de ser posible una parrilla de material mas grueso para obtener un mejor asado y otra para el carbón .
😉👍
👍👍😉
@@melitontrejo8138 sszZuiuuiiî
It's so cool 👍👍👍
I don't know if you have a sandblaster but if you did you get the paint off that cylinder a lot quicker LOL.
How to replace car shocks
A good and great idea. Thank you Mr. DK DIY.
Thanks for the idea.. very good, regards from Spain
👍👍
Muy buena idea para el pais del asado
I make log burners out of old mini safes.. well one, I gave 8 I'd stocked to scrap man..also, 3x3 box joint rocket stove.. love metalwork.
Careful some refrigerants are explosive. Always look up MSDS sheets on all of these types of tanks. Grinding should always be done with care
I'd suggest adding in a fiberglass sealing strip along the bottom half of the bbq, that way it will seal up, and less chance of someone cutting themselves on the rim.
Muy buena idea lo are y gracias bendiciones
this is more useful as a side smoke box, than a grill. or maybe a mini woodstove/heater.
I'm gonna be nice and give everyone a tip. Because time is very valuable, before watching any RUclips video straight through, go look at the last minute and you might save yourself some valuable time!
Nice ideas ... but please, someone teach him to weld. Constant spot welds are crazy
great idea cant wait to make one for the beach!!! thanx
I do the same mini BBQ with freon tank, great job man I like it
All I can say is GREAT JOB ! And your a Great Cook 👩🍳
Thanks
A great cook? For putting meat on a grill? Guess I'm missing something.
How do you know? Did you taste it?
nice idea..suitable for grilling n bbq
😉😉👍
Made one like that about 10 years ago still using it when we go camping.
I did the same with a propane tank. Except used diamond plate for the grill.
Not to be a Negative Nancy, but I wonder if the cost of materials, electricity, and time were cheaper than just going to Lowes or some other vendor and buying one? I would also add that the grill makes it impossible to completely close the lid. If he had welded two angle pieces along the inside for the grill to rest on and then cut it to fit inside that would allow the lid to be closed fully. Then just weld a circular ring on the side of the lid with a movable ring to allow control of air being introduced into the grill.
or just sit around and pull yer pud watching people buy other peoples shit from storage eunuchs, I like the constructive criticism cause the ideas help for the next build, most people are all like this is what i woulda done, then do it there chiefy and lets see yours.
@@bungieflute Are sayin that instead of giving my thoughts on what could've improved the grill I should just build my own?
@@davids7209 I was just fuckin wicha, I'm an artist myself and people are always saying this is what I would have done, then you ask them what they've been doing and its mostly watchin t.v.and decreasing my intelligence quotient. I like to bust out one of my pieces and show 'em what I've been up doing . Well now, that is making me think I need to shut my pie hole and piss and produce , instead of talkin ca-ca, sorry pardner cause when I read your chingadera{commentary} I thought oh yeah that would make flush then wouldnt it . Sorry fer bein a pinche' vavoso. Vayo con dios, Amigo.
@@bungieflute Instead of projecting your daily actions of "pullin pud" try being less of an asshole
Impressive.
Cool video!
what welding rod are you using? amps? thx
next time the hinges needed a little allowance some gap like example 2 mm between the two parts, BUT i like the job, great mate,
If U cut at the corner of top and lower part to become as a hole after joining both the parts to keep the roster grill perfectly than the upper part can cover nicely and also the grill can remove easily and yes, haldle should be of wood. Although video is 👍👍👍
👍
Very nice
Τελεια η ψησταριά από μπουκάλα φρεο μπράβο .
Мангал из Фрион Танка. Гениальная самоделка, как я раньше до этого не додумался.
Вот это да, как я раньше без этого жил. Гениальная самолелка. Но лучше купить на Е Каталоге и не заморачиватся.
Thanks
I guess I am kinda off topic but do anyone know a good site to watch new series online?
@Judson Francis flixportal :D
@Vivaan Ignacio Thanks, I signed up and it seems like they got a lot of movies there :D I really appreciate it!
Great video right up until the end when you started cooking lol now I'm freakin starving for a juicy steak lol
The music made it seem like I chewed a few buttons and was wandering in the desert.
Love your Wrk man. I have 2 tanks at home,gonna get to Wrk now!! Thanx for the inspiration
Thanks 👍👍😉😁
Diba delikado grinder in yn? Pasagot nmn po
What kind of welder and rods did you use? I have a bunch of these tanks, but someone said they are to thin, so you burn throufh them. I am not a good welder, so i would appreciate some feedback..briliant video.
thank you!
Super, Congrats!!
Good job.
Thanks for the video. I learned some things and I have five (5) of those tanks. I wanted to do some creative projects with them and this video gave me some great ideas. Thanks again.
That is awesome!
Muito bem , ficou top. 👍👍👍👏👏👏👏👏👏👏👏🇧🇷🇧🇷
Thanks bro
Not everybody has it Welter, so what are you do if you don’t have a welder
My woife DIVORCED me for bringing home another piece of junk thanks to this video.
No, she probably divorced you for being illiterate.
You should have noticed it so the grill would sit flush and the cover would close better.
Nice job brother 👍👍👍
Thanks bro 👍👍
muy buen trabajo , felicidades!!
👍👍😉
Thats a great idea......I've just found an empty Propane Gas bottle.....
Wheres my kit.
Que pratico que ficou de fazer um assadinho! parabéns.
Uhmmm freon is non flammable. If you do this with a propane tank or something flammable you will blow yourself to the next dimension. Always good to fill a tank with water first before you attempt cutting.
Ficou muito,muito,muito,muito bom mesmo amigo
👍👍👍
Thank you for placing a lense over your camera while welding. most people do not do so and even though save for the eyesight it makes videos hard to watch at that point
I can still taste that meat on that from tank grill. I love it. I need to make one.
Exelente
👍👍👍😉
I like the color of those freon tanks.
🔘🔘🔘🔘
@@MrDKDIY q
Amazing Video Wow
Great Idea and invention, but is there something wrong with the hinges? Why so hard tro move and does not seem to close all the way? are they to tight or some weld got in them? with those I expected the lid to slam shut on its own.
It doesn't close all of the way because the grate is laying over the edges.
Very good ideas and the job of professional, perfection, tank you very much for the quality video.
Thanks
Buenísimo amigo todo lo que ases la verdad un capo
최고👍👍👍
👍👍👍😉
Nice work
Next time instead of doing all that sanding, get some " EASY - OFF OVEN CLEANER .spray the tank completely and let set for about 7 to 10 minutes, hose it off with water ( just DONT get any water spray on you ) This WILL remove any and all paint and rust and save a LOT of time. I have cleaned an engine block down to the bare metal doing this.
Apakah dengan di jemur tidak meledak ketika dipotong tabungnya? Atau gimana caranya supaya tidak meledak saat kita potong?
👍😉
PARABÉNS. CRIATIVIDADE 10.
You can make a nice little charcoal blacksmith forge out of that
People can buy a small gas grill for 20.00, or 25.00$,, but i know its fun to make your own! Helium tank for balloons is also ideal! A builder does not need a welder. Bolt the stuff together.
Bravo, very nice 👍
Tnx 👍
Very well done and ingenious!!
Hi wonder if you can help , few years back my fridge freezer broke down and I ended up storing it outside to keep garden bits in .. I’ve recently moved and it’s ended up here, so we cut the metal from the back and there was a smell of nail polish remover which I’ve found out was the gas .. It was outside about an hour and then put in the shed . Do you think the gas will be completely out of it now or is there away to remove the gas to make it safer ?
That’s cool but you probably spent more money to make that than what buying a grill that size cost
Thats not the point.Maybe you should read the book: Zen and the art of motorcycle maintenance.
MAYBE you would get the point!
Geez...just say you're converting it to a BBQ pit.......Mute the drab music!
I just mute my phone. It's still too boring to watch 🤣
What about those that enjoy drab music?
And with too many segways🤣I'd rather watch short videos
Love it well done
I find more helium tanks than freon tanks.
Not sure if the size is the same but they're good for other projects.
The music puts me to sleep😴