Testimony: I was having problems with my 2010 Toyota Wish motor car. I took it to Berts amongst q lot of places and none could solve the issue. Over the weekend I came upon this video and called the great Lizard. I went to see him today and the issue was remedied in about two (2) hours. No timing change etc and no extra cost . Thanks Lizard you're a genius . Thanks also to Emul Auto..
Got an engine light on my dashboard, took my 2ZR-FE car to a mechanic and he said we either change the valvematic(difficult to get) or we do cancellation. Can cancellation work? Thanks
@@lizardautomotive9281 That's excellent news. I'm sticking a 3ZRfae engine in my mk1 mr2. The 3zr bellhousing bolt pattern looks a bit different vs the 2zr. I have a 6speed from a 2zr. They may not be as different as I think though. It looks like the 3zr might sit back at more of a slant?
@@vladnedelescu813 I had to remove all 16 or so bolts on top holding down both of the shafts, so I can carefully lift up the shaft and turn it slightly. Be really careful because the shaft is connected to the timing chain on the other side, and also there are metal spacers on the shaft that fall out easily. The metal spacers are in a specific order.
@@drfalcoew8939 thank you very much for your reply. Unfortunately at the time i fitted my new valvematic I simply forced it to tilt in order to remove the pin. Long story short my timing is messed up now, I will take it to a mechanic to fix the timing. Lesson learned... dont force things inside an engine
@@lizardautomotive9281 he said what "happen with your hand" in malaysia.. the translation don't seem understand what he said because he short the words..
Testimony: I was having problems with my 2010 Toyota Wish motor car. I took it to Berts amongst q lot of places and none could solve the issue.
Over the weekend I came upon this video and called the great Lizard. I went to see him today and the issue was remedied in about two (2) hours.
No timing change etc and no extra cost .
Thanks Lizard you're a genius .
Thanks also to Emul Auto..
What’s his number
Hi, what were the symptoms on your Wish?
Thankful for this ...keep posting more diy videos out repairs 👍
This is awesome.
Keep posting my brother
Nuff respect mi boss, had to subscribe, have to honor a genius when I see one.
Very good video please post more!!!
Thanks for the great content.🙂
Im subscribed, Great information , Good job.
May God bless you 🙏. Thanks a lot.
Good day to you how do you install the valve matic cam in the
Cylinder head and how you set the cam lubes also
Lizard the boss...you're simply the best
What’s the component beside the valve matic called
My toyota wish have in a 3zr engine but its not changing out of first gear without releasing and reapplying the gas
Where can i buy the valve matic parts
Got an engine light on my dashboard, took my 2ZR-FE car to a mechanic and he said we either change the valvematic(difficult to get) or we do cancellation. Can cancellation work? Thanks
Did you manage to know if cancelation works? Its pros and cons
I having a problem fix up back my 2011 Toyota voxy value matic and crankshaft in box where I can find u please
Do you happen to know if the 2zrfe manual transmissions will bolt to that 3zrfae motor?
Yes they are compatible
@@lizardautomotive9281 That's excellent news. I'm sticking a 3ZRfae engine in my mk1 mr2. The 3zr bellhousing bolt pattern looks a bit different vs the 2zr. I have a 6speed from a 2zr. They may not be as different as I think though. It looks like the 3zr might sit back at more of a slant?
@@lizardautomotive9281 As it turns out, the bellhousing bolt pattern is different 3zr vs 2zr.
Big up u self lizard me see u
Can you put in one for me
My shit doesn't spin freely like this so I can't get to the pin easily 9:42
Hi did you manage to solve this? If so, how?
@@vladnedelescu813 I had to remove all 16 or so bolts on top holding down both of the shafts, so I can carefully lift up the shaft and turn it slightly. Be really careful because the shaft is connected to the timing chain on the other side, and also there are metal spacers on the shaft that fall out easily. The metal spacers are in a specific order.
@@drfalcoew8939 thank you very much for your reply. Unfortunately at the time i fitted my new valvematic I simply forced it to tilt in order to remove the pin. Long story short my timing is messed up now, I will take it to a mechanic to fix the timing. Lesson learned... dont force things inside an engine
@@vladnedelescu813 sorry to hear that!
Hello !! Help me !! Plesss
I am looking intake rocker arms to buy my 3296677
Apsal tangan tu
Thanks for you concern my hand is okay now 👌 🙂
@@lizardautomotive9281 he said what "happen with your hand" in malaysia.. the translation don't seem understand what he said because he short the words..
@@lizardautomotive92811:06