Это видео недоступно.
Сожалеем об этом.
Traffic Sign Recognition - Enabling on VW MQB Group Cars like Skoda, Audi, Seat (VCDS / OBDEleven)
HTML-код
- Опубликовано: 30 авг 2021
- Steps used to enable Traffic sign recognition. You will need OBDEleven or VCDS to make the changes.
Get the original OBDEleven from here: s.click.aliexp...
NextGen OBDEleven (Future support for BMW as well) here: s.click.aliexp...
You will need an A5 camera fitted already used for e.g. lane assist.
Controller 5F (Multimedia)
--Adaptations--Car_Function_List_BAP_Gen2
traffic_sign_recognition_0x21
Change to to activated.
--Car_Function_Adaptations_Gen2
menu_display_road_sign_identification
Change to activated.
--Long Coding--Byte 24, Bit 6
Traffic Sign Display (VZA)
Change to not active
Controller A5 (Driver Assistance)
--Long Coding--Byte 16, Bit 04
“Traffic sign recognition VZE"
Change to Active
Controller 17 (Dashboard)
--Long Coding--Byte 5, Bit 2 Enable
“Traffic Sign Recognition installed".
Change to Activated
Works great - I enabled traffic sign recognition in my 2018 Audi RS3. Thanks!
I can’t understand why the VW groups decided to remove this really good feature 😮. I had it in my Ford Ranger it’s such a good feature!
They don't remove it. They just don't give it unless you pay for the upgrade.
Great video! Just done the same on Audi Q3 with VCDS, exactly the same steps worked like a charm!
interesting, I couldn’t get it to work on mine with OBD11 for my Q3
Hello, great video! I just finished the coding on a Canadian market 2017 Mk.7 Golf Alltrack. The coding went well, with no glitches. I can see the Dynamic Road Sign Recognition option in the central console in the Car-> Assistance systems menu. I can also see that the compass has moved from top centre of the dashboard to the bottom left and that the temperature display moved from bottom centre to bottom right of the dashboard. However, when I scroll through the Driving Data screen on the dashboard, when I reach the Road Signs sub-menu, I have a message that reads "No road signs available". Hence, when I drive, no road signs pop up on the dashboard. I suppose I do not have the right camera? Thanks again.
Hello, I followed all of these steps on my 2020 Q3 but then the speed warning setting became greyed out and inaccessible. Any idea of what I should do?
Great video,
Unfortunately it doesn’t work on my 23 Skoda scala style. 😢
Hello, great video and thank you so much for the detailed explanation. I just want to know if I will be needing to reset to the old settings if I'm taking my car to the dealership?
I would say if it's a leased car then some eagle eyed ones may have an issue and say you modified the car. Never heard of an issue like that though.
I owns a Škoda Octavia model 2023, but when I tried to turn it on Traffic Sign Recognition via OBD11 like on video. I could not turn on the TSR because via video instructions I can not find on my car via OBD11. Do you have experience with the new Skoda Octavia model 2023 and is it possible to post a video on how to turn on the TSR via OBD11. Thanks in advance
Not possible on the latest models with just obd11. Need VW servers for paramaterization as well
Worked for me on my RS3 qas well! Thank you! I do however get a popup saying traffic sign restricted, consult manual. Any ideas if this is normal?
Multiple things, e.g. it doesn't have data for your country. Sometimes it's just you need to take it for a drive
great video, are the steps the same for the 2018 Skoda Superb w/ Columbus? many thanks
Great video, Everything works fine exept i don't get the driver assist meny options. Do you know what might be wrong?
I have 2014 version (TSR factory activated) and since it reads my Country, that does not have map traffic signs loaded, it does not work. I have it set as activated, but "not available in your location" error message on the dash. disabled VZA, but still nothing.
Unfortunately, tsr data needs to be loaded into the camera. For many countries this wasn't done. Unfortunately, you will not be able to get this functionality. However, if you drive through a country where it exists it will turn on
Hi there great video, I just wanted to ask if this would work on an Audi Q3 2019. The car already has lane assist, Sat Nav and traffic recognition camera built in. The virtual cockpit has the option for traffic sign recognition but currently states not available when I switch to it. Thanks in advance for any assistance.
Thanks for the great video. Got most of the way there but I am using VCDS and cannot see the first option traffic_sign_recognitiom in the adaptations menu. The next one shows and i can change this, i am thinking it might be called something different? Many thanks
Do you have the correct camera?
I dont have the unit 5A driver assit audi s3 2017 premium plus
Will it work on aN aUSTRALIAN Golf 8 Life (2022-23)?
You'll need the right hardware, but there are extra steps required such as parameterization which is another security step requiring dealership software. Not possible with just obd11
@@laymandiy Thanks. I have the latest Golf Mk8 Life (1 month old) with all the required hardware (camera in windscreen etc). For some obscure reason only the vehicles sold in Europe and UK have this function enabled but not in Australia. Function can be enabled on a Mk7.5 but the same technique does not work on the Mk8. Dealer is not willing to do anything! Hence my interest in your method.
Hi! Thank you so much for the video! I have a 2019 A4 B9 and I was wondering if I could follow every step on this video. I don’t think my camera is parameterized
If you have the kit, follow the instructions. If your camera requires parameterization, it just won't work. Revert to original
In A5 I don't have it. I've working Lane Assist with 5Q camera.
Hello, very well done video, congratulations! I have a 2021 Kamiq with the 2Q camera serial. Is it possible not to be able to activate? Thank you.
I don't think it's possible at the moment without parameterization if camera which involves connection to the VW servers
Thanks for the video, any idea how to do this (specifically last step) on MEB platform ? In my case the car recognizes the signs and shows a message saying I exceeded speed limit for example however the sign itself is not shown on the dash or HUD.
I'm sure it sure but it would be a trial and error with the bits.
Hi there i have the problem
On my road sign on passat B8
Hi great vid I have a Audi A4 B9 2016 if I do this will it show up on my normal screen on dash the one the shows you digital speed
Yes should do.
Awesome video thanks. Do you think this will work on a 2023 Audi Q5?
Sorry, no chance. Need additional equipment
Hello, can get this to work on 2023 tiguan R in Australia, all steps fine but do the last step which is changing the camera mode from fuision to detection, any ideas?
Not possible on the letter models with just obd11
Which a type of vcds i must have? Can you give me more detailed instructions in the comments?
I have a golf 7 and i have camera for recognation traffic sign, but my car show notification "no data available for the area" I live in Bosnia , and when i in Germany traffic sign working
Thank you
You need at least vcds hex-v2. Some countries don't have tsr. If it works in Germany there is nothing wrong with the setup. Maybe try trying the vze option in long coding (see video)
Hi great video are theses the correct steps for a VW golf r 2018 mk7.5 thanks
Should be. However it appears is a mixed bag depending on the camera you have. I'm sure it's fine for 18my
Hi, if i have ACC and lane assist on my 2017 Tiguan and head-up-display and i don’t find how to activate trafic sign recognition in my settings, it’s possible to activate in my car with VCDS?
Yes
Hey man awesome video, I didn't have byte 05 on my instrument panel controller but still got the Traffic sign menu option so thanks
Question, do you know if after I install OEM Blind Spot System it can be coded with OBDeleven? What are the steps?
If you don't have blind spot from factory then you're missing the mirrors and the 2 rear sensors that go into the bumper. You won't have be able to just code them in.
@@laymandiy I have the whole hardware from harnesses, radars or controllers and the mirror indicator lights, I know how to connect the wires I just need to understand how to code it using OBDeleven
@@laymandiy actually all the hardware is OEM and specifically for my VW CC
Hi, thanks for posting this video. In my case I noticed that is not reading traffic signs but is showing them from navigation. Any idea how to fix this? Thanks.
Yes the last option of VZE / VZA I explain in the video which option to select. Ideally you want a hybrid where it shows maps signs and then it overwrites it with what it's picked up from the camera
Hi
I was wondering if you could help me. So firstly I've done it by one click app. Then I followed you long coding. I have activated TSR but it doesn't works with my map. My map only displaying speed limits from signs, which I hoped will work together. Any idea how to get fix it? Thx
You want map speeds or real life speeds picked up by the camera?
Hello. I have a brand new Audi Q2 MY2022. The steps are the same?
I have the matrix led, so there is a camera on my car front-glass
Yes, with the addition of parametrisation which will need to be done with dealer software or vcp. It's not easy..
Would this work on 2020 Audi Q3 S line premium plus, I currently have traffic lights recognition, thanks
Possibly, check if you have the right camera
Hej tack för en bra video Dock är min engelska dålig och videon går snabbt men tror du detta handhavande fungerar på min Audi A3 8y 2021 För att aktivera denna funktion
Hur vet jag om jag har rätt kamera som stödjer funktionen jag har A5 Camera mfk3.0
You will most likely need to parameterization of the camera. If you have lane keep assist, you have the right camera.
Hello:
Great video.
Will this work on a 2021 Audi Q8?
Thanks
I normally say after 2020 it's hit and miss with these procedures, so unlikely, sorry.
(2022 atlas premium /R line) same instructions? Also can I change my dash colors/configuration?
Unfortunately you need more tools on the newer models. But you can change mood lighting in the car. Not sure about the dash colours
Hi there, thanks very much for the great video. It worked a treat how unfortunately my lane assist is now not working. I cannot tick it within the car settings and on OBD11 it says it is not supported. Please can you help? It was working perfectly before activating TSR. Thanks very much.
Have you used an ob11 app at some point?
@@laymandiy sorry for the late reply. I've used to activate some apps with credits, but never long coding before. Any suggestions at all please? Many thanks
Hi how to swap from eu sign to us sign
Thx
Awesome video thanks. Do you think this will work on a 2021 SKODA KOROQ with Front Assist function.
It's still possible. However there are extra steps outside of vcds to do, unfortunately.
What would be that extra step?
Parameterisation of the hardware , you need to do it online direct with vw
Thanks for the video. I have a 2020 Superb iV with Columbus Infotainment and Virtual Cockpit. Will all the steps be the same?
Yes..
@@laymandiy Both OBD and modules look a little different for me.
'Traffic sign recognition 0x21' (no underscores) is found under 'Vehicle function list BAP'
'Menu display road sign identification' is found under 'Vehicle menu operation'
When long coding, none of the bits are labelled.
On updating controller 17, byte 5, bit 2, I get the same 'Dynamic Road Sign Display Error' in the dash, so same coding seems to apply
Finally, on locating controller 5F, byte 24, bit 6, it was already unchecked, despite the fact that I have the display of Nav traffic signs activated. This makes me wonder if the coding should be different on this model?
The end result is that no traffic signs are displayed and I when I select the Road Signs in the dash, I get the 'Road Sign Display Error' message.
Any thoughts or advice you can offer?
@@garynicholson360 The slight renaming of things is poor admin from obd11 however the byte/bit may not have descriptions for your vehicle but if it's mqb platform you should be fine. As always it's advised to do a backup so you can revert to it. However similar names under a different adaption, I don't think would work. However this is the beauty, you can try it and revert if it doesn't.
Hello. Superb 2020 after these steps on the odometer - a malfunction of the road sign recognition
Are there any steps your weren't able to complete? Have you driven the car since?
hi my vcds wont let me enter any functions for my mqb, any ideas why?? did you need any fec/swap codes etc and was/is your car code protected?? cool video
Not sure, is your VCDS genuine?
Hi Laymandiy. Just a question. I have golf 7.5 1.5 tsi rline 2017 model with acc and front assist with blind spot mirrors and I have also virtual cockpit. But I dont have lane assist with traffic sign recognition. Do you think I can enable it with and make it work with ur instructions?
There isn't enough information here to determine. Front assist and acc doesn't mean you'll have TSR. The main thing is the camera given that you don't have lane assist or TSR already makes me think you don't have the right camera.
@laymandiy Thank you for ur response 🙏 I also think I don't have the camera. But I need the oem parts to make it work. But I don't know which camera part exactly I need. I don't wanna use a thirt party part.
Don't think there is a third party part you can even use. Part should be easy to find, just find the parts catalogue online and look for the part number for a spec of vehicle that has it. Most likely will start with 5q0 ...
Do you can activate lane assist when you have acc ? I have a Skoda kodiaq sportline (front assist and acc )
No, acc and front assist use only the radar. Generally sportline doesnt come with upgraded cameras.
Will this same process work on a 2018 Audi B9 with virtual cockpit
I have been informed that if you have the right hardware, there will be the extra step of parametrisation of the camera required
Thanks for the video, i am wondering if the same will work on Vw ID4 Crozz Pure + . any idea
Definitely not
@@laymandiy any idea for ID4 cars in how to do it
Error: dynamic road sign display… how can fix that after enable all this? Octavia 2014
Is it permanently on ? Normally clearing all the faults and a drive fixes it
Great video. Anyone know if this will work on new Ford Tourneo Connect which uses the latest Caddy Life platform? I already have OBDEleven that I've been using on Mk6 Golf. Thanks
Definitely not, this is vag group
New Tourneo Connect is made by VAG so I wondered if it would work - same factory, hardware and software @@laymandiy
I am aware but I'm not sure what diagnostic interface it uses. I would assume that it would be ford for service etc. Nonetheless even if it's VW, it wouldn't be possible since it would require parametrisation as well which is not possible with obd11
Hello my friend..I don't have last step on my car ....traffic signs display uncheck....what I do now?
Car make, model, year, and which step are you doing?
does this work on skoda scala too?
If you have the big camera (A5) then yes. Or if you already have lane assist.
Hi Layman, will this step work for a 2016 Audi Q7 4M? i have the OBD 11 already
Doubt it, it's not on mqb platform.
i dont have a driver assistance control unit on a cupra ateca any ideas ?
The effort involved in enabling this would not be worth the hassle if you're asking this question. Unfortunately they are not a simple plug and play device.
also what version of OBD 11 do you have? as when i go to long coding and toggle to byte, i just get numbers, however the one in your video gives a description of what each one is?
It's not the version, it's the car. It dependant on obdeleven company putting descriptions for your car in the database.
Hey, nice video, can you help me if this works in the 2019 Skoda Karoq SEL model?
Should do, yes if you have all the hardware.
@@laymandiy it has got a camera on the windscreen. What other hardware do I need? Thanks
Hello, at 3:15 I've 00. Byte 16 all bit are 0 whitout name descriptions
(I've 5Q0 camera with a working Lane Assist)
Can you do one for how to active lane assist too please 🙏
Would love to, but lane assist is slightly more complicated as you need to have the right hardware installed and enabled. Unless you're talking about the "drunk" version of lane assist
I turned it on using OBDeleven but since mine does not have the control switch it is always on and activates on speed higher than 40mph.
I would agree to layman that it is mostly drunk version.😊
My Kodiaq 2019 has Bolero infotaiment (no satnav). The car has A5 camera and lane assistance.
Does this procedure also works for my type of car?
You can try, but I think the bolero struggles with the fusion mode where as Columbus works out of the box and Amundsen has a better chance.
@@laymandiy thank you for answering!!!!
What is fusion mode? I run navi with my phone over Android Auto and USB and have no speed limit shown on instrument cluster (if this is fusion that you have mentioned). I just need that road sign that is read is shown at instrument cluster in front driver, but not on the Bolero.
Can I just skip some of your steps then?
@@laymandiy Yeap, works, but works very bad and unreliable.
I think you'd need to follow all the steps and flick between fusion / non. Fusion steps in to substittute map data
Will this work for Audi A4 b9 MY2017, this one is with lane assist and I can see the camera behind the rearview mirror. If yes what kind of obdeleven should I buy, I can ses there are different versions available online. I'm in Australia.
This is for mqb platform you have MLB where the camera needs to be parameterised first followed by these codings on obd11 or vcds
@@laymandiy so is it possible for me to parameterized the camera? Or should I take my car to mechanic to do that? Sorry but all these terms are very new to me. I just googled the mqb vs mlb platform so got to know my car is on different plantform.
You can parameterise yourself if you know how, it's not as simple as what is shown in this video. You'll need to research and learn what's required the steps etc.. you can use VCP or ODIS plus you'll need the interface to connect to your car. Any old mechanic cannot do this you'll need to go to retrofit specialist.
I can't find A5 driver assistance. 2017 Audi A6
You may not have the right hardware, e.g. camera
Hi, I have a Kamiq with Amundsen radio, ACC and lane assist. I have the camera and radar etc. Can this be done on my system taking into account its an Amundsen System? thanks
Is your lane assist adaptive? I.e. you have adaptive option which centres the car between the lines?
@@laymandiy not sure but the lane assist does automatically steer the car back to the lane if I don't touch the wheel. I don't think I have an option to change that to just notify of lane change. If I don't indicate, the car will try to steer its way back into the middle of the lane
I bought the OBDeleven PRO pack, and I can access the car and all the apps etc. When I try the first step with 5F/multimedia, car_function_list_BAP_Gen2 is not in the list. I have a 2022 Scala. Any ideas what might be wrong please?
Yes, so newer models are struggling with this. There is more security. Once it's been worked out, I'll post a new video. As it stands there is a step that you cannot do without vw involvement so stuck atm.
@@laymandiy Ah, I see. I couldn't use any of the apps either - they let me select "yes" but then failed to write after I ticked save. The credits were used then refunded. Was that also caused by the additional security?
Is it worth me keeping the product? I currently can't do much with it. When do you think it will be worked out? Thank you for your help so far.
I wouldn't touch the apps at all.. they are just a series of commands in a script, known to cause problems, because you don't know what exact changes it is doing. Up to you, it's a good diagnostic tool as well for all VW maybe help some locals out for a couple of quid here there and you've made your money back
Olá. Tentei ativar os sinais de transito e só diz sem sinais disponível. queria que me ajudasse. fiz a configuração e devo ter desativado alguma coisa ou bits. na tela do onde diz assistente de eficiência agora está em cinzento e quando carrego nessa opção diz que neste momento não está disponível. Obrigado
CUMPRIMENTOS.
There are many variables here. For example if you're in country which doesn't allow it, or it cannot recognise the traffic signs in your country
@@laymandiy No meu país é permitido. é um Audi a4 b9 de 2018.
Ativei o assistente de faixa e está a funcionar.
How activate navigation on octavia 2022 model
You'll need paramaterization as well. Cannot be done with vcds / obd11
i have a new 2022 SEL Jetta. I followed all of your steps yet when I hit the start button I hear a din and the following message shows up on my dash. Error: Dynamic Road Sign Display. I double-checked all of my steps and it still shows up. It shows up in my MIB and the box is checked for Traffic Sign Recognition.
Take it for drive, if not then I'm afraid you also need camera parameterisation. It's a newer model thing.
@@laymandiy I have taken it for a drive and still the same result. I will check around for some more information since it's a later model. Thanks for your great video!
Most likely the the camera needs to be parameterised
Hello. I have a 2017 Audi Q7 and was wondering if I could do this. I do have the camera I believe but I don’t have the drivers assistance package so no lane keep and TSR etc, but I do believe I see a camera there. Would I need any other tools to do this? Thanks
Seems unlikely they'd install a camera if you have nothing that uses it. The camera is pretty big from the front of the windscreen you should see two notches, one is camera and the other is rain sensor. Sounds like you probably just have the rain sensor
@@laymandiy I did take a closer look and there is a camera there above the rain sensor. I did also look at my dads s5 which has drivers assistance and they look the same. It does make some sense from a manufacturing perspective to just make one assembly for all q7s so that maybe why it’s there. I do also have pre sense so that’s why it could be there. I’m not 100% sure if it is the right a5 camera I’ve seen mentioned and if it is will it require tweaking and coding I’m not willing todo to get the rest of the drivers assistance besides acc
There's two ways either obd11 it and do the changes see what pops up. Or detrim and check the model of the camera
@@laymandiyI do believe it will work as I just activated lane keep assist with the obd11 app and it works. I only have the free tier so I maybe I’ll poke around later
Hi there, owner of a Tiguan tsi 245hp R line with the big camera. Tried to enable traffic sign recognition through the obd eleven app which costs 100credits, and while the app is scaning i get the message "function is not available". I could try going the long coding way but from what i see on the web nobody has succeded on activating traffic sign recognition on facelifted tiguans......there must be something that vw has done there.
Tried the long coding way, and there's nothing remotely similar as option to what's shown in your tutorial video or in other pages in the web. Vw must have changed something on newer >2021 Tiguans
Yes they have.. newer ones require parametrisation on the camera to enable the bits and adaptions on the obd11. Unfortunately it's out of scope for most people as it requires using official VW equipment with a dealer code.
Hy, this works with polo 2023 mib3? Thanks
Not yet
Might this also work on a 2018 Seat Leon TDI? Thank you.
Yes it would.
hi layman could i get this to work on a 2020 seat arona xcellence lux
Borderline, not sure. Some 2020 models+ require parametrisation
I tried this on my 2019 Audi A4 but it threw up an error. I’ve coded lane departure and it works fine, is there another way to do it?
What was the error?
There is one other way to do this but need to know if you have a HUD
Any idea if this works on MQB EVO platform ? (8Y RS3) Thanks
Not at the moment.
Does this work on a Skoda Octavia 2013 with lane assist?
If it has all the hardware, don't see why not
@@laymandiy It has the camera on top of the window as you pointed out. What does the traffic sign recognition actually do?
@@lb1011 all I can say is give it a go. The camera recognises real traffic signs. Really useful for variable speed limits.
how to fix error "sign assist availability currently limited" ?
It just means it's not picking up any signs. What country are you in?
@@laymandiy i see all of traffic signs, recognizing is perfect, but still this error. every time after 45 km/h or 5 minutes run. I'm from Israel. Maybe it need to write correct country number in par_country_code_RSR and Par_country_code_VZF ?
You can try that.
@@laymandiy That - how?
Unfortunately this didn’t work for a 2022 Cupra Formentor (Australian version).
Unfortunately it only seems to work well with the first gen mqb hit and miss with the second gen (depending on hardware used) and doesn't work at all for Evo.
I have Cupra Formentor 2022 Europe, and i dont have traffic sign recognition, but i do have traffic signs on my nav. Can you tell me could i code it on virtual cockpit, at least i would like to have signs from nav read on cockpit?@@laymandiy
Hi, I treid several times but without any luck. I'm using the IOS app and the car is a nov 2020 Kodiaq L&K. I have the A5 front camera, but my app only shows the "Car_Function_Adaptions_Gen" not Gen2. In the end I get an error message Road sign not availible. It took it for a ride but no change. Anyone ???
If you click on the control unit, go to the live data parameters check if you have "SFD activated status"
Unfortunately, newer cars, VW has put some security that obdeleven can circumvent but it's a bit of a hit and miss.
@@laymandiy Thanks, will check it tomorrow.
Hi . I own an VW TRoc 2021 mode and does come with MQB3 infotainment system . Some of the setting shown by it are not available at all can you help out
Need more then that, have you got the cameras?
Yes I trust I do have the cam
Is there any way to check
Easiest would be the trim level you have. But if you look at the rear view mirror if the base it goes into isn't at least a handspan then you don't have the camera... Bear in mind there are 2 types of camera and the bigger one is the one you need
Hi, will this work in a Skoda Karoq MY22? Thanks in advance
Sorry, not at the moment.
Can you do this same video with car scanner pro? Taking a challenge.
Sorry, I don't think so. As it doesn't have the adaptions / long coding
If I have to enable this in kodiaq which doesn’t come with the camera and radar hardware, can you help me point to the necessary parts that I need to procure ?
What model year is it?
@@laymandiy MY 2023 ( about to get one). This is the India Spec which doesn't come with Radar and camera based driver assistance package.
Unfortunately as it stands you cannot easily retrofit this on newer vehicles.
Hi, «the traffic sign recognition vze» says that the function is not available to me. What to do? I have golf mk7 2015 model with camera in the windshield. Everything else worked, and i see the menu in my MFD
Vze is hit or miss. Have you taken it for a drive?
@@laymandiy hey thanks for replaying. Yes i have and its working. But when i drive past a speed limit with 60 and a line over (means the speed limit is 80) then it shows nothing. And whwn i drive it sometimes says «limited functionality» on my MFD display. What does that mean?
I am living in Norway btw.
Limited functionality means it hasn't picked up a road sign either from the camera or the maps data. Laws around speed on maps vary from country so it could be multitude of things. yh it might not have what that means. In the UK a kind of black and white no entry sign means national speed and it does pick that up on mine.
@@laymandiy thats what i mean, black and white sign. I asked a friend with an audi rs3 218, and his car detects those signs as well. There are nothing i can do?
At least its working with most speed limit signs.
Hello can u activate so u can see signs in every country??
Everywhere where it is legally allowed, yes.
Will this work on MLB as well?😊
Unlikely... There will be other steps
Thanks for the effort LaymanDIY! I was so inspired by this, that I bought an OBDEleven PRO setup and attempted to do this on 2022 SQ5 Sportback. Could only find the first and the last step in the procedure that match. Is that something that is known?
What trim level do you have? You need at least premium plus or greater...
@@laymandiy I do have premium plus.
@@yury.k So whilst you have the hardware, these steps are for MQB you have the MLB Evo. So whilst this may not work for you, it appears you have the hardware ready. I will have to look into MLB evo I do not have a car at hand to make the assesment.
I have found that it's a 2 step process. 1st step is paramatisation of the camera which can only be done using ODIS / VCP and the second step is to use obd11 or vcds to finish the coding.
@@laymandiy Thank you for trying! Are there any instructions that cover that process?
hello, I have seat arona 2022 style, it has an camera, is it suitable for this feature?
You'll need additional tools not just obd11
What is additional tools, could u tell me pls?
For starters, vcp, subscription VW servers to activate and finally this to do the coding (you can use vcp also)
I’m trying to do same Steps for my New VW ID 4 but my Multimedia have only 2 Long coding steps
Please Help
Sorry this is most likely not compatible with your car.
@@laymandiy copied on that thank You for prompt Reply
HI. I did the coding but until I find road signs it doesn't show me anything. shouldn't the limits of the navigator database go out when it doesn't detect signs? before it gave them to me on the navigator. Thank you
Did you flip the VZE toggle?
@@laymandiy what is it about?
Please watch the section in the video about vze
Wow! All that mucking about just to activate road sign speed detection?!
I think I stick to Waze road sign display
😅
It's the next stage to this that is really good. The predictive cruise control. Slows down and speeds up based on traffic signs.
Would this work on a 2023 Audi Q7 Premium Plus?
Not yet. It doesn't really work on cars 2021 onwards
Hi there,
I have an Audi Q3 F3 2019 without navigation and bought the dongle from Kufatec to enable traffic sign recognition. It is working, camera is reading traffic signs, but after 2 minutes I always get the same warning on the dashboard. "Traffic sign recognition is limited, please check your manual" or something like this. Although it doesn't cause any problems, it is very annoying every single time, 2 minutes after ignition to get the same warning. I'm pretty sure it has to do with the absence of navigation. Any recommendations to avoid this stupid warning? 🙂
Link to navigation isn't superficial. Try flicking the VZE parameter in long coding. Also silly question, is your windscreen clean.
The windscreen is crystal clear 🙂 I will try this, but as far as I have searched a lot of people have the same problem with me and noone has ever found a solution. I think the VZE parameter was unchecked
I can see why not having maps can be an issue. Would it be easier to add navigation?
No, it is almost impossible. I'll have to change the infotainment unit, change the wiring and then verify the new infotainment in an official AUDI service. And I forgot to tell you that AUDI says that I cannot make this upgrade 😛 dead-end!
This only works with factory installed cars gps with maps on infotainment screen ?
Gps and maps aren't the relevant items on this. The high line camera on the front is.. it needs to be there for it to detect traffic signs
.
@@laymandiy cool ! My VW Atlas comes with front camera sensors .. I’ll try this with my OBDeleven … thanks
Hi. Thanks for this video, but I followed every step on my 2018 Audi RS4 B9, it has road sign recognition surface on my virtual cockpit, but it is actually cannot recognize any sign when driving. Can you help me?
What country are you in?
@@laymandiy New Zealand.
I would go back redo the steps, perhaps try flicking the VZE toggle
@@laymandiy Yes, I did the flick the vze to coded, and the MMI has a menu to set +10km/h, +15km/h, but the instrument cluster cannot show any traffic sign.
Does your nav screen on the dash not cockpit show speed signs, even as the ones from maps or better yet the one being scanned by the camera?
Do you know will it work on octavia mk4?
Thanks
Most likely no
hello, does this also work for kodiaq 2023?
Not without paramaterization.
will it work for an Audi A7 2013?
Possibly, but doubt you have the hardware installed. Plus it's the mlb platform so steps will be different
Would this work on audi RSQ3 2016 plate?
Yes, I believe it should, as it's old enough to not require parametrisation
do i need navigation funktion in my car to activate traffic sign recognition
It's not necessary but if you don't even have nav then I doubt you have the right camera
@@laymandiy how do i know what type my camera is , i'v Skoda Superb compi 2019
The profile of your rear view mirror base. If it's large with a camera lens
Hello is the same for passat b8?
Depending on the year, yes.
Do I need the pro version to activate this?
Yes
Car Function List Bap Gen 2 is missing? What should I do?
Car? Year?
@@laymandiy 2023 skoda karoq. I found it under different menu. Bu I received message "Traffic Sign is not functional". I guess İt is closed in My country TR
Other websites said
Road sign Fusion should change to Road sign Detection. " It is not changable. "
"Under messages were not shown"
Control unit A5 (front / advance camera) Adaptation
Select : channel numbers indicate end of speed limit Importance to actively invest Show Valid suffix View Channel Valid suffix
Corresponding value adjust default: 00100111
Traffic_sign_recognition_0x21_msg_bus = Databus Infotainment / Databus extended ????
One website said that you should be changed camera parametres
@@Kanaryago that's correct. The camera for newer models needs to be parameterised, as it stands, can only be done directly via vw
Great video, thanks for sharing. Ive got the new menu displaying now in the VC, but can only get a "no road sign recognised" error. Im based in the UK. Do you know what the issue might be?
Have you taken it for a drive?
Does it work on a5 b9 2020 ?
50/50 it has a chance of working. 2020/21 is when things started to change