I've never been a big fan of yellow paint on a sports car but this EVO 8 looks great in yellow with black wheels!! I'm thinking matching yellow powder coated brake calipers would really POP sitting behind those black rims..; just my 2 cents.
In the past I have had issues with the vent flap. The cause was that the outter housing of the cable was not secured causing a binding issue with the inner cable. I really couldn't tell in your video if the clips for the cable were in good shape or not. I feel like this might be part of the issue you are experiencing with the blend door since both the gears on the switch housing and the heater core work independently but not together.
I've started doing some tinting. Just for my own stuff and some friends, it's not that hard doing side windows. The back windows are what would be a pain. If you want it done for that car, just hire it out and learn on some of the other cars.
Dont like that flex fuel sensor placement. Get a leak from the fitting and its dripping all over that electrical box with the heat sink fins all over it so it must get hot. Or is it just me .
Devin an 06 ralliart is fun to own the engine is a 4g69 its a freaking maching mine has 293k miles on stock motor and trans running like new has mivec its a poors man evo without awd also evo head fits the 4g69 block alot of people in puerto rico put evo heads to go from 1 cam to 2 cam head
You should really just replace the heater core and evap core while you’re in there. Parts are cheap and it prolongs you having to pull all that stuff out again if something were to plug up or leak
Bro big ballers don’t drive Mitsubishi lancers. You could drop 100k into a Toyota Tercel, it’s still a Tercel, trash. This car is super clean but set YOUR GOALS HIGHER. I went to high school in the mid 2000s and had these cars in the student lot. Expand man. The power you’re making on cheater sauce is like a modern German car with simply a tune, it’s weak. Get better please, your content is solid. Literally living the life of a 18 year old in 2003.
How do you get the motivation to rip out the dash? I have to re pin my 60pin connector and completely rewire that section. I’ve ported, cammed and so much more. I’ve just hit a IDGAF anymore feeling. Can’t break past it…. Any suggestions? 🙏
Lightweight flywheels are notorious for rattle on decel.
Commented a few videos ago. Sounds exactly how my car sounded with a lightweight flywheel
I feel like you’d also hear it clutching in tho, no? My QM twin disk chatters like a mf clutching in
With your quartermaster, the disks rattle against the cage when it’s not engaged
I've never been a big fan of yellow paint on a sports car but this EVO 8 looks great in yellow with black wheels!! I'm thinking matching yellow powder coated brake calipers would really POP sitting behind those black rims..; just my 2 cents.
In the past I have had issues with the vent flap. The cause was that the outter housing of the cable was not secured causing a binding issue with the inner cable. I really couldn't tell in your video if the clips for the cable were in good shape or not. I feel like this might be part of the issue you are experiencing with the blend door since both the gears on the switch housing and the heater core work independently but not together.
My first car was a 2003 lancer ES, and the sheething on the cable was the issue! No need for new parts 😊
I was thinking the whole time "Devin don't forget to grab the side mirror!"
I've started doing some tinting. Just for my own stuff and some friends, it's not that hard doing side windows. The back windows are what would be a pain. If you want it done for that car, just hire it out and learn on some of the other cars.
Check the joints on the drive shaft for that noise. I had an EVO3 that had a similar noise
That rattle can also come from the fuel tank guard. check it and see.
Clean setup on engine bay. Those controls knob omg no fun to work on that’s for sure. Win on the parts at pull yard. Amazing build top in my opinion
I think the blobeye STI deserves a resto like the Evo!
Dont like that flex fuel sensor placement. Get a leak from the fitting and its dripping all over that electrical box with the heat sink fins all over it so it must get hot. Or is it just me .
Agreed
Good job man keep up the awesome work
I took off my center console to fix hazard switch and dislodged my temp control. It’s stuck on hot now. Which is nice. Till summer.
So cool seeing how you do all that work. I can't trust myself to do it as I have never done it. Would love to learn how to work on my bmw 335i coupe
Could always go to the wreckers for the heater/cooler and would possibly be cheaper as well
Its coming along nicely devin and looking very well
I have a similar noise on my BRZ 5th gear decel after a clutch job, seems a lot of other people have the same noise after a clutch job
Hi from France dude ! Love What u do ! 👌
Devin an 06 ralliart is fun to own the engine is a 4g69 its a freaking maching mine has 293k miles on stock motor and trans running like new has mivec its a poors man evo without awd also evo head fits the 4g69 block alot of people in puerto rico put evo heads to go from 1 cam to 2 cam head
Carbon fiber GANADOR MIRROR, DOOR HANDLES and FULL CF WING would be SICK AS A ADD ON...💪👌💥💯🇵🇭👍...
Its hard to put digital AC in this car???
Question. Do build other lancer evo’s if you get opportunity
Since the blend door actuator is good and the switch is good could it be the cable connecting the two
You should really just replace the heater core and evap core while you’re in there. Parts are cheap and it prolongs you having to pull all that stuff out again if something were to plug up or leak
I did the heater core ony old 95 golf. It sucked!
Have you tried to physically move the blend door itself? I had one that the sealing strip glued itself to the housing. I had to manually unseal it.
Hey, Devin. Are you going to ppf the Evo when you do your paint correction? Is ppf worth it?
park perfectly on an empty parking 😂 looking beautiful
Hear me out..... Could it be a possibility that once you charge the AC it will build pressure to help move it?
So OEM its going to be a 1000hps
rock the tintless look. more timeless...
Bro big ballers don’t drive Mitsubishi lancers. You could drop 100k into a Toyota Tercel, it’s still a Tercel, trash. This car is super clean but set YOUR GOALS HIGHER. I went to high school in the mid 2000s and had these cars in the student lot. Expand man. The power you’re making on cheater sauce is like a modern German car with simply a tune, it’s weak. Get better please, your content is solid. Literally living the life of a 18 year old in 2003.
Kaaaa LEEEEEEN car man, beautiful!! Great videos!
Step by step 🙌🏼
dang brother she came out minty good shit !! keep it up
When did Devin get tattoos 🤔👍
How do you get the motivation to rip out the dash? I have to re pin my 60pin connector and completely rewire that section. I’ve ported, cammed and so much more. I’ve just hit a IDGAF anymore feeling. Can’t break past it…. Any suggestions? 🙏
Yeah, sell me your Evo… easy
My goat ☝🏼
my 9 made the same rattle. it was the rear diff.
Perhaps the new gear you put on is on to tight, try backing off the spindle a mm or 2
I wonder if that’s the rattle in my evo
When did Devin get wrist tattoos?
Junkyard entrance stamps
Looks like stamps! Weren't there in the beginning of the video. Im guessing they stamp u at the junkyard for entrance ?
Salute 💯
He said Magyver some things 😮😅
YES SHE IS BEAUTIFULLLLL
blend-door
I hope you got your side mirror.
Looks better to me with no tint
My climate control did the same thing on my Evo 8
I use to have to move it manually
I cringed not seeing the cover on the steering wheel 😅
Nice 😎😎😎👍👍👍
I see Devin..I click 😞
made 2x the work for yourself not resolving the blend door issue before you put the interior together lol.
The last thing you wanted to do...uuuugh
I love me some Mellow Yellow, Bobbi and her handsome Fellow ❤❤❤❤
Love this car, but man that rear diffuser is painfully bad :(
Facts it’s not needed the number already gives it what’s it needs
first!!!!