it'll drive much more smoothly if you offset the u-joints on each transaxle by 90 degrees to each other. look at a the uni joints on each end of a driveshaft and you'll see why.
I just ended my engineering semester, and I used your design for my final project. Great work, there were some things my team and I had to improve and change in order to meet our project’s requirements, if you want to check out what we did we would happily share it with you
everything I used was from amazon, I'm not even sure what most of it is anymore since I've used the same electronics for many projects. I know that the motor is a GoolRC 4076 2000KV 4P Sensorless Brushless Motor. If you are trying to make this car, caution advised I'm not a professional, I'd recommend buying a sensored motor so that it doesn't cog. The ESC just needs to accomodate the motor you use and choose whatever battery you want. the servo is a typical cheap 20-25kg servo from amazon too. shocks are 1/10 scale 60mm I believe. I think I mentioned that somewhere in the last video maybe, idk. everything else is printed
Honestly Im Sad to see this proget go, but im exited to see new content
:)
Its so cool seeing the suspension in the rear compress as you accelerate, great camera angle!
agreed, the fpv shots were pretty neat
it'll drive much more smoothly if you offset the u-joints on each transaxle by 90 degrees to each other. look at a the uni joints on each end of a driveshaft and you'll see why.
I just ended my engineering semester, and I used your design for my final project. Great work, there were some things my team and I had to improve and change in order to meet our project’s requirements, if you want to check out what we did we would happily share it with you
We added a differential and a better gear train so you don’t have to push it to get it going
@@luigivargashennings5262 I would love to see that! that's incredible. shoot me an email at hamburgerincofficial@gamil.com
I told you about that suspension hard point in your last video. it failed exactly as predicted.
indeed 😅
very nice ! what about making a basher monster truck 1/10 4 wheels drive ?
Would it be better to reduce the gear ratio so it doesn’t need a push at the beginning?
Oh for sure lol. That, and adding a sensored motor to get rid of the cogging and find what part of the revolution it's on.
Do you mind attaching your hardware material please, I wanna remake it :)
everything I used was from amazon, I'm not even sure what most of it is anymore since I've used the same electronics for many projects. I know that the motor is a GoolRC 4076 2000KV 4P Sensorless Brushless Motor. If you are trying to make this car, caution advised I'm not a professional, I'd recommend buying a sensored motor so that it doesn't cog. The ESC just needs to accomodate the motor you use and choose whatever battery you want. the servo is a typical cheap 20-25kg servo from amazon too. shocks are 1/10 scale 60mm I believe. I think I mentioned that somewhere in the last video maybe, idk. everything else is printed
what size bearings are in the wheel hubs?
2.1cm outer, 1.5cm inner I think
what about making a slower rock crawler? :)
have yet to explore that side of RC Car's yet, could give it a look for sure
Nooo it needs aero. Just kidding sad to see it go through
lol
Amazing also first
Dang, im third
Damn, second!