@@pascalbellanger3325 Tires with an outer diameter of 120mm or less and 1.9-inch rims should work just fine. The tires in the video are stock TRX4 tires, and the rims were purchased from AliExpress. I'll share the links below. ko.aliexpress.com/item/1005004101630874.html?spm=a2g0o.order_list.order_list_main.446.7dd6140f2ewMS5&gatewayAdapt=glo2kor
Thank you for your interest! I'll share the link. ko.aliexpress.com/item/1005006775546301.html?spm=a2g0o.cart.0.0.48e656ba3Kxh6a&mp=1&gatewayAdapt=glo2kor
Visually it looks great. Thanks for sharing. But when I look at the driving video I see that the tires are in the air even on very simple obstacles. It would be great if you could improve this part.
Thank you for visiting and for taking the time to watch the driving video. I intentionally set the shock travel to be short to explore different driving sensations. As you may already know, using shocks with longer travel and adjusting their mounting positions can prevent the tires from lifting off the ground. 😊 I'll include a link to a driving video of the same model with properly set shocks, driving on the same terrain. Thank you for your interest! ruclips.net/video/PIVRk69SW7U/видео.html
@@elvisrcchannel4590 Hmm. This is much better than the other one. The CG looks very good as well. It managed to pass places where most vehicles would overturn. Are the necessary parts for this mod in the 3D files?
@@aGGreSSiv In the video description below, you'll find a list and quantities of non-printable parts along with purchase links. You can order the necessary parts before purchasing the data, making it easier to determine if production is feasible in advance. 😊
@@elvisrcchannel4590 I just have a question about the brushless motor. I am thinking of using a sensored motor. There are options like 6T, 8T, 10.5T, etc. I don't know if it is related to torque. Can you share some more details about the brushless motor? and will there be any wheels for 1/10 or is there anything we should pay attention to
@@aGGreSSiv For crawler brushless motors, I recommend Hobbywing’s Fusion SE or Fusion Pro. The motor used in the video is the Fusion SE 1200KV, which is an all-in-one motor with an integrated ESC. Its compact size and lightweight design provide advantages, and it offers excellent low-speed torque at an affordable price, making it highly advantageous overall. It operated smoothly with the gearbox in the manual without significant issues. The car in the video has a wheelbase of 320mm, which roughly corresponds to a 1/10 scale. Most 1/10 scale crawler wheels should be compatible. As for specific points to watch out for, ensure you adjust the length of the link rods appropriately during assembly. This should help avoid any major issues. Before purchasing, I recommend gathering sufficient information about the structure and components of RC crawlers to make an informed decision.
Your interest and compliments mean a lot to me. In my country, we do sell fully built products, but for overseas customers, purchasing the data and building it yourself might be the best option. However, shipping it to your country doesn’t seem too difficult or impossible. If you’d like to know more details, please feel free to email me at seohoocg@naver.com
I inserted a 5mm LED into the modeled LED hole. The rear lights look different in the driving video because I didn't have red LEDs. Instead, I used white LED bulbs and created a cap with red PLA to attach to them.
Thanks for creating a shorter version from all of us ❤
Thank you for showing so much interest; I decided to create a shorter version. I appreciate it!
That is one awesome build!!!!!!!!!!!!!!! Very Cool!!!!!
Thank you for visiting and watching. I will continue to make cool and fun vehicles!
Very well done and super hard, bravo 👍🏻
If you want me to advise you on the broken engine, you will have to drive me!
Thank you for watching. I hope the engine breaks soon! Make sure to buckle up! ^^
What size wheel can I get? Do you have a model to show me?
@@pascalbellanger3325 Tires with an outer diameter of 120mm or less and 1.9-inch rims should work just fine.
The tires in the video are stock TRX4 tires, and the rims were purchased from AliExpress.
I'll share the links below.
ko.aliexpress.com/item/1005004101630874.html?spm=a2g0o.order_list.order_list_main.446.7dd6140f2ewMS5&gatewayAdapt=glo2kor
which sound module did you use? great job!!!!!
Thank you for your interest! I'll share the link.
ko.aliexpress.com/item/1005006775546301.html?spm=a2g0o.cart.0.0.48e656ba3Kxh6a&mp=1&gatewayAdapt=glo2kor
Visually it looks great. Thanks for sharing. But when I look at the driving video I see that the tires are in the air even on very simple obstacles. It would be great if you could improve this part.
Thank you for visiting and for taking the time to watch the driving video.
I intentionally set the shock travel to be short to explore different driving sensations.
As you may already know, using shocks with longer travel and adjusting their mounting positions can prevent the tires from lifting off the ground. 😊
I'll include a link to a driving video of the same model with properly set shocks, driving on the same terrain.
Thank you for your interest!
ruclips.net/video/PIVRk69SW7U/видео.html
@@elvisrcchannel4590 Hmm. This is much better than the other one. The CG looks very good as well. It managed to pass places where most vehicles would overturn. Are the necessary parts for this mod in the 3D files?
@@aGGreSSiv In the video description below, you'll find a list and quantities of non-printable parts along with purchase links. You can order the necessary parts before purchasing the data, making it easier to determine if production is feasible in advance. 😊
@@elvisrcchannel4590 I just have a question about the brushless motor. I am thinking of using a sensored motor. There are options like 6T, 8T, 10.5T, etc. I don't know if it is related to torque. Can you share some more details about the brushless motor? and will there be any wheels for 1/10 or is there anything we should pay attention to
@@aGGreSSiv For crawler brushless motors, I recommend Hobbywing’s Fusion SE or Fusion Pro.
The motor used in the video is the Fusion SE 1200KV, which is an all-in-one motor with an integrated ESC. Its compact size and lightweight design provide advantages, and it offers excellent low-speed torque at an affordable price, making it highly advantageous overall. It operated smoothly with the gearbox in the manual without significant issues.
The car in the video has a wheelbase of 320mm, which roughly corresponds to a 1/10 scale. Most 1/10 scale crawler wheels should be compatible.
As for specific points to watch out for, ensure you adjust the length of the link rods appropriately during assembly. This should help avoid any major issues.
Before purchasing, I recommend gathering sufficient information about the structure and components of RC crawlers to make an informed decision.
Honestly, I thought you were gonna bolt in the dashboard decal.😅
Ah-ha! Next time, I'll bolt it down for a super sturdy decal! 😂
Awsome build, a work of art, BRAVO. Is there any way to buy full built tractor? I would be very interested.
Your interest and compliments mean a lot to me. In my country, we do sell fully built products, but for overseas customers, purchasing the data and building it yourself might be the best option. However, shipping it to your country doesn’t seem too difficult or impossible.
If you’d like to know more details, please feel free to email me at
seohoocg@naver.com
Cool project! whats the name of the beadlock wheels?
Thanks, my friend!
ko.aliexpress.com/item/1005004101630874.html?spm=a2g0o.order_list.order_list_main.446.7dd6140f2ewMS5&gatewayAdapt=glo2kor
What did you do for rear Lights?
I inserted a 5mm LED into the modeled LED hole.
The rear lights look different in the driving video because I didn't have red LEDs.
Instead, I used white LED bulbs and created a cap with red PLA to attach to them.
5.897 screws
An expert's eye truly sees things differently. Such precise quantity estimation!