@@jellylightningii5959 But if he anchors it in the ground it would be fine. He ccould simply weld it to a block in the ground and have pre-built support pillard
If you build a bridge over the pond, then when you add a sensor, you could push a part right behind you with a piston off, and thus pump on a flat service.
that or a lip or extend a flat part of terrain out over the chem spill or maybe something akin to an oil derrick (ie something like deepwater horizon without the incident that happened)
That would be a great idea! Or something like wheel chucks built right in the pond, just back up into them and the truck/trailer will be held in place...
Here is my comment on your tanker trailer. Tanker trailers come in Links of 53 feet and 48 ft and 36 ft for doubles or triples. As far as your trailer goes it looks like it's the right length and nearly the right size diameter as they come in all sorts of different diameters for tanker trailer. What is making yours look visually off is the fact that you are trailer tires are a bit far forward. In real life the assembly the rear tires are hooked to can slide forward or backward to adjust the weight that is distributed across the tires. Your trailer looks fine it just looks like the tires are slid into the forward position which is what you would need to back into the water just my opinion
A true legend. Always love when someone from an industry locks on to a tidbit or comment of a gamer then actually makes an awesome comment on the topic. Comments like these are what make comment sections awsome
I work at a chemical plant, that looks like a perfectly sized tanker. You could also build a pier to park the tanker on when you’re getting the chemicals.
Honestly, using that term like that is confusing for me (I'm used to landing gear referring to landing legs of a space lander like the lunar lander or the gear on a plane)
@@Emiruuu Well, once you make an easy switch system, it really isn't, you don't spend as many materials on vehicles or anything, and this may be better in the long run, but I am not an expert by any means
Being a trucker for a living I'd say you got that tanker trailer dimensions pretty spot on, maybe 3-5 blocks less on the length and you just need to add a curve to the front & back of the trailer(no more than 3 blocks) & I'd say that is perfect. Also the feet you use to hold up the trailer are called landing gear. If you ever need add info on big rigs your doing in scrap mechanic you can hit me up on Twitter at Madogcotk. Awesome episode, been loving all the big rig stuff you've been doing!
There's a axle ratio of 3.21, so the front wheels to the rear wheels of the truck times 3, thats the distance from your truck rear wheels to the trailer wheels
nice rig kan. those pumps are really heavy.think you would benefit from making 3 rows of 3 chests inside.. maybe more. then have pipe outlets you attach pumps to when you get to destintion. this way it will look like extending pipes and chests stay inside. could even make it with 2 seperate " chambers " to haul both water and chemicals. i found if making 2 rows of chests and in middle have them connected with a single pipe by chest top outlets, then it suck in water for an extra non existing pump. like if both sides have 3 pumps on them the one side pump 3 water pr second and other one pump 4. i really hope they add a device to fit on pipes and chests like the chute we deliver fruit tru at packing stations. this way we can transfer stuff without taking things apart when pump is aligned. also a pipe section you can turn on/off with a switch would be great. this way we can deliver materials to the right chest in the piping system after fabricating or refining. 2 small parts with great potentiale.
well I would agree but the storage vs fill time would be in a bad ratio but it would be similar to what water tankers do when they fill up from a lake or river (well they back up into the liquid)
Here's an idea for you or chemical trailer and getting the chemicals. My suggestion is you build a short dock out into the chemical pond to back your trailer onto to hopefully stop your sliding. Then just deploy off the end of the dock and pull back out
Kan, I think you saw (maybe not) the video when Scrap man made an indestructible box from Warehouse keys. You could make a Warehouse keys tank and see if it can resist bosses and red tapebots as well
You could try building a bridge like thing going into the chemical pond a block or so over its surface. You would then back the truck onto it, align it with the edge and get to harvesting
Couple of truck ideas... 1.) For the trailer lock, directly under the hitch location place a low level sensor that just reaches far enough to detect a trailer hitch. Connect it to an AND block, Connect that to the piston that locks the trailer in place. Add a switch connected to the seat and the AND block. Turn on the switch, and back up to the trailer. When the trailer is in place it will automatically lock. Turn off the switch to unlock the trailer and drive away. 2.) For the trailer stands, place a 1-block sensor directly behind the hitch. When the hitch lock closes it will detect the block and raise the trailer stands. When the truck releases the trailer (or you move it with the build stand) the stands will lower automatically. With those two changes, you can hook up to a trailer and immediately drive away without ever leaving the drivers seat. You can also unhook and drive away... so when you build a truck yard for all your trailers, you could rearrange all the trailers as much as you want while never leaving the seat. (though using the build stand is still faster and easier.)
Build a Pier/dock for the chemical lake so your truck can back in on it and remain level. It will stop the sliding and if not you can add automatic wheel chucks to the pier that activates with sensors once you are parked properly.
Flexible Vacuum Tube would be real cool, so you could build a Vacuum Pump mechanism to deploy into the Water/Chemicals but have a ton of Chests linked together deeper in the trailer for storage (would also cut down the weight strain on the mechanism because chests are heavy)
@@jaden8923 what person would need 16 comments XD, would it be like 1. HI 2. Kan 3. I 4. Love 5. Youre 6. Vid 7. Keep 8. It 9. UP 10. yeet 11. Fries 12. 👁👄👁 13. Help 14. Yellow 15. Aaaa 16. Done
hey KAN build a giant gate at left side of the wall then build a road with rails around your base because it will be more easer for your trucks to drive
These videos are so fun to watch! I get so many ideas from these videos. If i feel down i watch your videos to distract my self from it. Thanks for the content kan! ❤️
Maybe have a vacuum pump in the water behind the craft bot, and link it up with vacuum tubes to the chest next to it. Saves having to do anything there.
It looks about like a milk truck. I hope they add some kind of easy on off connector for stuff like that to keep the lag down. Or anything else you might want to build with attachments.
@kAN Gaming You can use a set of sensors and a vacum thingy to make a replaceable wall. Vacums can place blocks, if you use sensors for like each block or make some kind of 1 sensor checking a 3x3 or 5x5 area with pistonts or bearings you can make some sort of system that replaces the destroyed wall blocks.
you should add a water pump out the back wall of your workshop that leads into a chest, so you can take from it and is also on the intake of the concrete maker for faster crafting
Paint the green eyes from your logo on the side of the tanker. =b Good job, fun build! I went with a stationary chemical station that I just roll up to with my regular scout vehicle and collect from.
I did something similar mainly for water. My solution to the sliding was that I put kinda two Us that I would back my wheels into. (But mine was just a pump on a container on the back of my truck. I used it for watering, pump in, reverse the pump and water the plants lol)
2 things. If possible I’d recommend using angle pieces to try and keep the pumps from hitting coming in. And 2 try and move the front axle up a bit. Normally trailers have more spread apart axels irl.
Truck came out great. It is really huge for what you actually need. Maybe do a truck the size of a UPS truck. They really need to fix the friction of wheels. Especially lateral motion when stopped. It's just way too slick for a physics game. For base improvement, add more chests on the source side for the craft bot.
Build a platform to drive onto over the chemical lake to stop sliding of your truck. Curler would also look better if you put explosive/warning signs on the sides and back of it.
Make landing legs that hold the trailer up while pumping out of the chemical pond, just use a piston and a tire on its side or other high friction items. Like the legs on cranes or firetrucks
Little late kan, but maybe you could build a dock at the chemical plant. So that you don't have to deal too much with the wheel chock issues. Also, the terminology for those legs that hold up the trailer is called the landing gear.
I think the retracted pumps caught because you slowed them down. You could probably put them and the rear hatch all on the same 1 switch and sequencer. You'd just have to add a third piston for the raising and lowering of the pump assembly and time the opening and closing of the hatch. Heck, if you plan on making trips in the future, you could make a level platform for parking the tanker truck on like the others are saying, and just hook the pump mechanism to activate with a sensor aimed at a spot on the ground looking for a color. You back in, it auto extends and pumps, you drive forward just far enough to stop tripping the sensor, wait for the pumps to get put away, then drive off again.
kAN, Maybe try building a platform at the edge of the chemical pond. That'll dismiss the problem of you needing wheel chucks, and with a lip at the end you won't need to worry about backing your trailer off of it. And since you lowered the length of the pistons that lower the pumps, you can increase their length if needed. :)
8~12 cacti can greatly reduce the sliding of the vehicle (depending on the weight of the vehicle). Use the pistons to support 2 of the four wheel positions to the extent that the wheels do not bear the weight (slightly floating). KAN can try
Suggestion: Use Concrete 2 for an impervious wall. Its cheap to mass produce and Tote/Haybots wont even try to attack anything at or over durability 6 (concrete 2, metal 2, wood 3). You only need one strip about 3 blocks off the ground on the outside of the wall, then all you need to worry about is big reds. I use a puny concrete 2 fence and afk farm without any defenses, they just stand outside then run away in the morning, or use it to funnel them into an auto-crusher for the loot
@kAN Gaming, when you first showed the chemical container and was talking about the amount of chemicals you was able to get, I was going to post that you “kAN” (pun intended) use the large chest and attach 3 pumps to it, but I decided to watch the whole vid and noticed that you actually know ;) so here’s to say nice vid and great content :) Btw, I perused your drill contraption for my vehicle, which is an exploratory vehicle with mining and logging capabilities all in one :) I still have to update the pistons though, and I’m thinking on adding extra saw blades to it ... currently it’s 2 blades at the front and 5 drills at the back, carries 2 - 4 collectors depending on what I’m planning, and 4-8 chests for loot :) I’ll probably add bearings to have fold-out blades to cut a wider berth when the blades are deployed ;)
If you used blocks to tie the pumps together you should, theoretically, be able to remove the chests and attach them to the craft bot input with the stone and water and not have to manually move them back and forth. I would suggest a loading dock at the chemical plant but looking at suggestions there are half a dozen already suggesting that as well. Another choice would be to build a concrete processing station where you just add chests of stone to a system that already pumps water and chemical if you have a water pond close enough to the chemical pond. If you could figure out a way to get the pumps to turn off after a certain limit was achieved.
As for the truck sliding into the pond. Build a permanent stall to back into that is u shaped that just barely fits under the lowest part of the trailer, that way you can back into it and it will hold the truck steady as you pump
I really like the truck/trailer theme you have going on with your survival game Kan. Everybody else builds a custom vehicle for everything, so they have like 5 of them sitting around. I like the multiple trailer thing a lot better, cause it means all your fuel is in one place.
Move your trailer buttons to the front of the truck and you can just back the trailer into the pond a bit. You could also make the trailer multi-purpose and cut down on the length by making it a tender trailer. Look up "Tender Tank Trailer" in google images for the idea.
To solve your wheel chock issue I see two ways, you could build a short u shaped wall right on the edge of the pond before backing the truck up and just lty it settle against the wall, or you could build a short bridge out over the pond and leave it there perminantly, giving you a horozontal surface to back onto
You should put a permanent material platform by the pond for the trailer so it doesn't slide and perhaps put a chest in your garage with a hole in the wall so a pipe can pass through and you don't have to go round back to get water it is just automatically organised in a single or multiple chests
i have an idea kan, you should put the trailer park on top of the garage, you can build a ramp if you want but i think just welding them on top would be good
If you're looking for base improvements, get yourself another Craftbot or two, fully upgrade them, and set each of them to a specific task. Scrap Metal to T1 Metal, Scrap Wood to T1 Wood Concrete with a dedicated water tank, chem tank, and a chest for depositing the scrap stone. Yes, water could flood the system. But you could wire timer-logic to have it shut off after filling the water tank. Just got to get the interval down, for it's rate of intake, vs rate of use. Balance that, and you could have it pumping out concrete for days without futzing with it much.
I noticed friction stat matters alot :) metals dont seem to have a lot of it, tires have a lot, might wanna switch some things like the support stands out at where they touch the ground with something with more friction to help :)
Make a dock at the pond, back your trailer up then drop the pumps farther down, the dock will be level so you won’t need wheel chalks
Although you could have a little three-blocks-high wall around the edge
you cold also just have a lil u shaped wall that he backs into on the edge of the pond
but the problem is he needs to put supports under the dock and while he is doing that he will also get damage from the pond because of acids
@@jellylightningii5959 thats y he should just build a short wall on the edge of the pond
@@jellylightningii5959 But if he anchors it in the ground it would be fine.
He ccould simply weld it to a block in the ground and have pre-built support pillard
If you build a bridge over the pond, then when you add a sensor, you could push a part right behind you with a piston off, and thus pump on a flat service.
wow smart
Just have a lip on the edge of the pond, no piston needed
i was going to say pretty much the same thing
that or a lip or extend a flat part of terrain out over the chem spill or maybe something akin to an oil derrick (ie something like deepwater horizon without the incident that happened)
Like a little pier, with a lip around the edge to stop the trailer sliding into the chemicals.
kAN is like the Mumbo Jumbo of Scrap Mechanic
he is sort of mumbo jumbo and grian put together
@@trebor_the_protogentvods YOUR GODDAMN RIGHT
You are so right
@@trebor_the_protogentvods I think Moonbo is the Grian of scrap Mechanic
@@trebor_the_protogentvods facts
suggestion: build a dock or something at the chemical pond that is flat so the tanker wont slip
That would be a great idea! Or something like wheel chucks built right in the pond, just back up into them and the truck/trailer will be held in place...
Agree, I think it's worth it to build a simple dock with a wheel stopper at the end of it
@@RobiBue yeah that was my idea, just build wheel chocks at the edge of the pool. small and simple
This is exactly what we were all thinking lol either a dock chocks or build a chute that is in the pond that stops the wheels
@@rebelredRC in his latest video he says he built a dock but he didnt show it
Here is my comment on your tanker trailer. Tanker trailers come in Links of 53 feet and 48 ft and 36 ft for doubles or triples. As far as your trailer goes it looks like it's the right length and nearly the right size diameter as they come in all sorts of different diameters for tanker trailer. What is making yours look visually off is the fact that you are trailer tires are a bit far forward. In real life the assembly the rear tires are hooked to can slide forward or backward to adjust the weight that is distributed across the tires. Your trailer looks fine it just looks like the tires are slid into the forward position which is what you would need to back into the water just my opinion
I was thinking it could be a bit longer, as chemical tankers in real life are really skinny, so he should have it be more proportionate.
This is a very informative comment. Lol
A true legend. Always love when someone from an industry locks on to a tidbit or comment of a gamer then actually makes an awesome comment on the topic. Comments like these are what make comment sections awsome
I don't speak nerd
But thank you for sharing information
Shut up nerd
I work at a chemical plant, that looks like a perfectly sized tanker.
You could also build a pier to park the tanker on when you’re getting the chemicals.
I'm actually surprised you have the time to watch
@@aaden6390 yea
Hey Kan! I saw how Scrapman used more than one craftbot, thought this might help with the amount of time you need to wait.
Computer Boy many you tubers are doing this
@@RowDyer it would be simular to the mc ae crafting with multiple crafting cores
It’s not copying because I did the same and as long as it doesn’t look the same it’s fine
It’s common sense. I have 12 in my world. Most maxed out. So how the hell is it copying?
i love when you build trailers!
Hi, the proper term for the stands on the trailer is landing gear. The pin is called kingpin and the hitch on the truck 5th wheel hitch btw
Honestly, using that term like that is confusing for me (I'm used to landing gear referring to landing legs of a space lander like the lunar lander or the gear on a plane)
Last week you helped me figure out what was wrong with my mining setup, this week it seems you're helping me with my Tanker. Perfect timing.
I love how he makes a survival game look like a luxurious truck building game
Honestly at this point (idc if this comment is 2 years old) I am just gonna copy him, it's genius to just have multiple trailers for different things
@@Z0nnestraal not really genius, it looks cool but it's unpractical as hell
@@Emiruuu Well, once you make an easy switch system, it really isn't, you don't spend as many materials on vehicles or anything, and this may be better in the long run, but I am not an expert by any means
This is definelty my favourite type of project to watch!
for one episode, go on scrap man's world and do his chores and he goes on your world and does stuff, scrap mechanic world swap!
Just make sure you back up the world first
Elite Entity they always do before and after each episode
This somehow makes me wanna see someone somehow make a deathswap game in SC
Just to let you know, your profile picture is a salute that was used by the Communist Party of Germany's Roter Frontkämpferbund
Where did you get this idea, it sounds horrible
Being a trucker for a living I'd say you got that tanker trailer dimensions pretty spot on, maybe 3-5 blocks less on the length and you just need to add a curve to the front & back of the trailer(no more than 3 blocks) & I'd say that is perfect. Also the feet you use to hold up the trailer are called landing gear. If you ever need add info on big rigs your doing in scrap mechanic you can hit me up on Twitter at Madogcotk. Awesome episode, been loving all the big rig stuff you've been doing!
Could u make a bigger boat that can go on land and explore with it
Like a boat-car
No
It's called an amphibious vehicle
Look at a Higgins boat. It was designed to get on land
Yes a amphibious car
"now thats the hieght we need to be at" *after modifying trailer twice*
There's a axle ratio of 3.21, so the front wheels to the rear wheels of the truck times 3, thats the distance from your truck rear wheels to the trailer wheels
well that is not always the case but a good rule of thumb and the tanker feels a bit short but it's kan's choice in redesigning it
Hey kAN! I just wanted to say that I love your content❤ keep it up!
Build yourself a ‘loading dock’ with integrated stops for the trailer’s rear wheels.
nice rig kan. those pumps are really heavy.think you would benefit from making 3 rows of 3 chests inside.. maybe more.
then have pipe outlets you attach pumps to when you get to destintion.
this way it will look like extending pipes and chests stay inside.
could even make it with 2 seperate " chambers " to haul both water and chemicals.
i found if making 2 rows of chests and in middle have them connected with a single pipe by chest top outlets, then it suck in water for an extra non existing pump.
like if both sides have 3 pumps on them the one side pump 3 water pr second and other one pump 4.
i really hope they add a device to fit on pipes and chests like the chute we deliver fruit tru at packing stations.
this way we can transfer stuff without taking things apart when pump is aligned.
also a pipe section you can turn on/off with a switch would be great.
this way we can deliver materials to the right chest in the piping system after fabricating or refining.
2 small parts with great potentiale.
See if the plants have enough friction to stop things from sliding
KAN! Build a flat platform on the chemical pond to back up on, kinda like a pier
How about fill the whole trailer with chest and then just put pumps at end so it would be like 10 chest of chemical
well I would agree but the storage vs fill time would be in a bad ratio but it would be similar to what water tankers do when they fill up from a lake or river (well they back up into the liquid)
I was thinking this, I know he's going for a truck and trailer theme but this just seems like a massive waste of metal
Are vacuum pipe T's even a thing?
NeoPhobik Gamer I don’t know, hopefully they are
@@neophobikgamer363 they aren't badly
I have liked some comments about docks to back up on & adding my own, you need a dock. That pump module is cool & the trailler is awesome, keep it up.
Here's an idea for you or chemical trailer and getting the chemicals. My suggestion is you build a short dock out into the chemical pond to back your trailer onto to hopefully stop your sliding. Then just deploy off the end of the dock and pull back out
like so Kan can see
You should use pumps to place some blocks. I'm sure you'll find a use for it.
It should take 200 seconds to completely fill, or 3 hours 20 minutes in game time.
Kan, I think you saw (maybe not) the video when Scrap man made an indestructible box from Warehouse keys.
You could make a Warehouse keys tank and see if it can resist bosses and red tapebots as well
i think the splash damage might damage all the logic and stuff inside the indestructibe tank unless i’m wrong
Yep... I believe the explosion eill destroy everything insides but not the garage keys
The tanker looks perfect the other trailers look to short
You could try building a bridge like thing going into the chemical pond a block or so over its surface. You would then back the truck onto it, align it with the edge and get to harvesting
Cover the pond with a large platform just below the surface
Couple of truck ideas...
1.) For the trailer lock, directly under the hitch location place a low level sensor that just reaches far enough to detect a trailer hitch. Connect it to an AND block, Connect that to the piston that locks the trailer in place. Add a switch connected to the seat and the AND block.
Turn on the switch, and back up to the trailer. When the trailer is in place it will automatically lock.
Turn off the switch to unlock the trailer and drive away.
2.) For the trailer stands, place a 1-block sensor directly behind the hitch. When the hitch lock closes it will detect the block and raise the trailer stands. When the truck releases the trailer (or you move it with the build stand) the stands will lower automatically.
With those two changes, you can hook up to a trailer and immediately drive away without ever leaving the drivers seat. You can also unhook and drive away... so when you build a truck yard for all your trailers, you could rearrange all the trailers as much as you want while never leaving the seat. (though using the build stand is still faster and easier.)
Is the drone battle vid comeing out? I haven't watched it yet causes I want to see it from your perspective
Build a Pier/dock for the chemical lake so your truck can back in on it and remain level. It will stop the sliding and if not you can add automatic wheel chucks to the pier that activates with sensors once you are parked properly.
when I loaded this video, I immediately got an ad for the one and only... *Raid Shadow Legends!*
I love seeing kan playing scrap mechanic. He is a marvelous ingenior.
Wow I never knew 1 minute could be such a difference in me being first to comment
Flexible Vacuum Tube would be real cool, so you could build a Vacuum Pump mechanism to deploy into the Water/Chemicals but have a ton of Chests linked together deeper in the trailer for storage (would also cut down the weight strain on the mechanism because chests are heavy)
Hi also RUclips says 1 view 1 like and 16 comments RUclips has good math
Likes dont matter when it comes to how many people watched lol
And 1 person could've commented 16 times
@@jaden8923 what person would need 16 comments XD, would it be like
1. HI
2. Kan
3. I
4. Love
5. Youre
6. Vid
7. Keep
8. It
9. UP
10. yeet
11. Fries
12. 👁👄👁
13. Help
14. Yellow
15. Aaaa
16. Done
RUclips math is perfect, its how they make money.
They just take a long time to validate every view where as comments and likes don't matter as much
Search Tom Scott. He has a video explaining the caching servers and why this happens.
I think the tank looks perfect Kan
Day 5 of asking people how there day is going
Great
like mario, fun
Good
Mine is great! How is yours going?
Good
You can click a repeat button in the craftbot to not need to click constantly if you need stuf in bulk.
kAN making awesome vids! i try to make awesome vids too :D
you've made this comment over and over again stop self promoting
I wish you luck and i will subscribe you on my every single account. Question to you, Can i Play with you on vids?
hey KAN build a giant gate at left side of the wall then build a road with rails around your base because it will be more easer for your trucks to drive
These videos are so fun to watch! I get so many ideas from these videos. If i feel down i watch your videos to distract my self from it. Thanks for the content kan! ❤️
Build a flat section at the chemical pond to park your tanker on for pumping now that you have easy concrete!
You can make a cycle system on your crafting bot. Making it automatically feed the in and out. And having it have a lot larger capacity.
Nice trailer
Maybe have a vacuum pump in the water behind the craft bot, and link it up with vacuum tubes to the chest next to it. Saves having to do anything there.
Put cacti on the bottom of the support legs. They have good friction, so should reduce the need for wheel chocks
Just something that could be cool is having a huge tube system that pumps chemicals all the way to your base into a storage system.
When you park the trailer next to the pond you could make Auto deployed chucks like crane trucks do
Build a flat platform / save area next to the pond so you can back up, not slide in and just have a cool little building to have
If you want a more rounded trailer I would use the large silo like parts on top of some of the warehouses.
You should make a little dock over the chemicle pond for your truck, should help with your sliding issue
It looks about like a milk truck. I hope they add some kind of easy on off connector for stuff like that to keep the lag down. Or anything else you might want to build with attachments.
Build a dock like platform at the pond for the trailer to sit on when you gather the chemicals
@kAN Gaming You can use a set of sensors and a vacum thingy to make a replaceable wall. Vacums can place blocks, if you use sensors for like each block or make some kind of 1 sensor checking a 3x3 or 5x5 area with pistonts or bearings you can make some sort of system that replaces the destroyed wall blocks.
Suggestion
you should add a water pump out the back wall of your workshop that leads into a chest, so you can take from it and is also on the intake of the concrete maker for faster crafting
Maybe try using diamond plate blocks or something as a stopper so you don’t slide down the hill because diamond plate has high friction
You could build a small wooden bridge for the truck to back onto. The pistons go down far enough that you don't need to be "in" the chemicals
Build a ramp at the chem plant/pond. Should stop the sliding. You still have plenty left in the pistons to compensate the extra height.
Paint the green eyes from your logo on the side of the tanker. =b Good job, fun build! I went with a stationary chemical station that I just roll up to with my regular scout vehicle and collect from.
Floor looks fantastic!
A dock type thing would work nice on the chem pond!
I did something similar mainly for water.
My solution to the sliding was that I put kinda two Us that I would back my wheels into.
(But mine was just a pump on a container on the back of my truck. I used it for watering, pump in, reverse the pump and water the plants lol)
For the chem pond you could take and make permanent weel chocks welded into the ground at the edge of the pond
2 things. If possible I’d recommend using angle pieces to try and keep the pumps from hitting coming in. And 2 try and move the front axle up a bit. Normally trailers have more spread apart axels irl.
Truck came out great. It is really huge for what you actually need. Maybe do a truck the size of a UPS truck. They really need to fix the friction of wheels. Especially lateral motion when stopped. It's just way too slick for a physics game. For base improvement, add more chests on the source side for the craft bot.
Nice. I think you should make a flat area for the trailer to sit on while it pumps
Build a dock into the chem pond to park onto, make the flat spot :P
Build a platform to drive onto over the chemical lake to stop sliding of your truck. Curler would also look better if you put explosive/warning signs on the sides and back of it.
Make landing legs that hold the trailer up while pumping out of the chemical pond, just use a piston and a tire on its side or other high friction items. Like the legs on cranes or firetrucks
You should put your logo on the side of the tanker for looks and it would look cool.
Little late kan, but maybe you could build a dock at the chemical plant. So that you don't have to deal too much with the wheel chock issues.
Also, the terminology for those legs that hold up the trailer is called the landing gear.
I think the retracted pumps caught because you slowed them down. You could probably put them and the rear hatch all on the same 1 switch and sequencer. You'd just have to add a third piston for the raising and lowering of the pump assembly and time the opening and closing of the hatch.
Heck, if you plan on making trips in the future, you could make a level platform for parking the tanker truck on like the others are saying, and just hook the pump mechanism to activate with a sensor aimed at a spot on the ground looking for a color. You back in, it auto extends and pumps, you drive forward just far enough to stop tripping the sensor, wait for the pumps to get put away, then drive off again.
kAN, Maybe try building a platform at the edge of the chemical pond. That'll dismiss the problem of you needing wheel chucks, and with a lip at the end you won't need to worry about backing your trailer off of it. And since you lowered the length of the pistons that lower the pumps, you can increase their length if needed. :)
8~12 cacti can greatly reduce the sliding of the vehicle (depending on the weight of the vehicle). Use the pistons to support 2 of the four wheel positions to the extent that the wheels do not bear the weight (slightly floating). KAN can try
The trailer is ok I like it
Suggestion: Use Concrete 2 for an impervious wall. Its cheap to mass produce and Tote/Haybots wont even try to attack anything at or over durability 6 (concrete 2, metal 2, wood 3). You only need one strip about 3 blocks off the ground on the outside of the wall, then all you need to worry about is big reds.
I use a puny concrete 2 fence and afk farm without any defenses, they just stand outside then run away in the morning, or use it to funnel them into an auto-crusher for the loot
Build a dock at the chemical pond to park the trailer on level ground to pump from. No more need for the wheel chocks
For the tanker we need to be able to pour stuff out of the tank that it comes in and get hoses to put it into storage like fuel chemicals and water
@kAN Gaming, when you first showed the chemical container and was talking about the amount of chemicals you was able to get, I was going to post that you “kAN” (pun intended) use the large chest and attach 3 pumps to it, but I decided to watch the whole vid and noticed that you actually know ;) so here’s to say nice vid and great content :)
Btw, I perused your drill contraption for my vehicle, which is an exploratory vehicle with mining and logging capabilities all in one :) I still have to update the pistons though, and I’m thinking on adding extra saw blades to it ... currently it’s 2 blades at the front and 5 drills at the back, carries 2 - 4 collectors depending on what I’m planning, and 4-8 chests for loot :) I’ll probably add bearings to have fold-out blades to cut a wider berth when the blades are deployed ;)
If you used blocks to tie the pumps together you should, theoretically, be able to remove the chests and attach them to the craft bot input with the stone and water and not have to manually move them back and forth. I would suggest a loading dock at the chemical plant but looking at suggestions there are half a dozen already suggesting that as well.
Another choice would be to build a concrete processing station where you just add chests of stone to a system that already pumps water and chemical if you have a water pond close enough to the chemical pond. If you could figure out a way to get the pumps to turn off after a certain limit was achieved.
As for the truck sliding into the pond. Build a permanent stall to back into that is u shaped that just barely fits under the lowest part of the trailer, that way you can back into it and it will hold the truck steady as you pump
I really like the truck/trailer theme you have going on with your survival game Kan. Everybody else builds a custom vehicle for everything, so they have like 5 of them sitting around. I like the multiple trailer thing a lot better, cause it means all your fuel is in one place.
With the bridge idea, make the trailer's belly open up in the middle and just have the pumps go straight down into a hole in the bridge.
Move your trailer buttons to the front of the truck and you can just back the trailer into the pond a bit. You could also make the trailer multi-purpose and cut down on the length by making it a tender trailer. Look up "Tender Tank Trailer" in google images for the idea.
To solve your wheel chock issue I see two ways, you could build a short u shaped wall right on the edge of the pond before backing the truck up and just lty it settle against the wall, or you could build a short bridge out over the pond and leave it there perminantly, giving you a horozontal surface to back onto
Make a truck stop at the pond where the truck doesn't slide :)
Keep up the great content
Kan you should build a concrete slab over that skinny piece of the chem pond so you can park to pick up the chems
Can't wait until you make big brain tree cutting and refining trailer.
You should put a permanent material platform by the pond for the trailer so it doesn't slide and perhaps put a chest in your garage with a hole in the wall so a pipe can pass through and you don't have to go round back to get water it is just automatically organised in a single or multiple chests
Put a high-friction block on the supports like cacti or wheels
Guys this is why I subscribe to KAN. It's because I love vehicle's such as cars and mostly trucks and train
i have an idea kan, you should put the trailer park on top of the garage, you can build a ramp if you want but i think just welding them on top would be good
If you're looking for base improvements, get yourself another Craftbot or two, fully upgrade them, and set each of them to a specific task.
Scrap Metal to T1 Metal, Scrap Wood to T1 Wood
Concrete with a dedicated water tank, chem tank, and a chest for depositing the scrap stone.
Yes, water could flood the system. But you could wire timer-logic to have it shut off after filling the water tank. Just got to get the interval down, for it's rate of intake, vs rate of use. Balance that, and you could have it pumping out concrete for days without futzing with it much.
Amazing video!!!! Keep Up the good work!
I noticed friction stat matters alot :) metals dont seem to have a lot of it, tires have a lot, might wanna switch some things like the support stands out at where they touch the ground with something with more friction to help :)
You can use mannequin boots to pad the trailer supports. They have insane friction, should be enough to stop from sliding.