BMW X5 E70 Dynamic Damping Control faulty... I think it will happen again...
HTML-код
- Опубликовано: 20 окт 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
So, as per the title, I think this car will have the same issue again in the future, but for now, it is fixed...
The car, this is a 2010 X5, the E70 chassis.
Came to me with a couple of issues, one for the hand brake, link to that video below, and this one, a Dynamic Damping Control fault message on the I-drive and cluster.
A quick scan, helped to establish the problem, and some testing narrow it to the culprit faulty part, but then, something happened...
Follow me on this video to find out what was the problem and how to resolve it, well, at least for now...
Link for the Hand Brake fault video
• BMW X5 E70 Parking Bra...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!
One of the better investments Luis. The resetable fuses. Together with a relay kit. As always , nice video.
☺️
👍👍👍
Where i can find those resetteble fuses kit?
Ebay and alike... for example...
👍👍👍
Lucky cheap fix is better than an expensive mistake! Trial and error, plus the simple reset can work wonders.
Indeed!
☺️👍
Mine: it show yesterday for read code: “6318: VDM: activation line, left”
Today, it disappears
One question: if we reset it by take out the fuse f106, and even take out at the same time the module, we do while the car is stopped with no ignition on??? Or is it necearry to start the enigne and do it?
If what you mean os to reset codes, no... the codes are stored on a non volatile memory... cutting the power to the module will no get rid of codes... reset, there's reset procedures performed by the scan tools, which send a command to the module to reset...
You can try that, but I think the fact that you have issues when wet, the reset will not fix anything...
Hi Luis, Excellent work as always..
☺️
Thanks!
👍👍👍
Good video!
☺️
👍👍👍
I had that problem before it was from the internal wier of the damper satellite
The wiers were touching inside the insulation
It is because of the bad plastic materials
Will keep that in mind...
👍👍👍
what was localization of that? rear satelites ? connection box of rear satelites ? wire in connection box?
I have the same problem with my BMW 525D Xdrive. Sometime Dynamic damping control failure pops up saying corner ability restricted. Onl Comfort mode is available. Yesterday it pops up same errors and the car got into emergency mode too with DSC stabilisation error. After turning engine for 10 minutes and restart everything works fine. Today I took a long trip no errors pops up. Today all drive mode works comfort to sport and sport+. Can it be the isolation in the damper satelite? Did you fix your problem by opening the damper satelite and isolate the wire?
@@dinhvanpham8102 hello 👋
My advice is :
1-find a workshop have a scan tool
2-dignos the car and delete fault codes
3-drive the car until the error appear
4-scan the codes again
5-send update on this comment or if you find the problem just fix it
* It is a big chance to be the isolation inside the wiers especially in the rear side between the chassis and the shock absorber.
Good luck 🤞
@@rafwol87 i am sorry i didn't see your comment, it is almost one year
I hope you fixed the problem
that's why I said customers with old BMW and low budget to take a walk :)
😅
👍👍👍
You will get a lot of weird errors when you have problem with your level sensors. Just run diagnostic and erase them. Do a complete service on your snsors and your sensors and your car will be happy and you will be happy.
Good job man
Thanks!
👍👍👍
Mine, the same.. especially get the VDM when driving in rains. But the next morning, it disappear and all system ok/good condition/no faults. Once i drive through one slope, it show VDM. And the next day no fault again. Like yours, the fuse is reseting overnight :P
Check wiring etc...
Is everything OK, could the the shock that is failing...
This one interestingly never came back... as least that I was made aware of...
👍👍👍
@@LMAutoRepairs as usual, it faults when running in big rain…. Show EDC, but a try to push sport, it still sign on the screen :) … let it be until the next day.. it disappears :P
@tungzin
That pretty much means water is getting somewhere it shouldn't...
A damaged wire, a poor connection...
You need to inspect everything...
👍
@@LMAutoRepairs yes. I check the stateline to cover it more plastic at wire for watching next times. Check the right back of the car: no water leak. The fuse f106 surely no blown up… electric no water… the module is ok with the previous nylon bag out side :D …. Updating later
Check
@mothanagharbe513
comments, he said the isolation on the wires between the chassis and the shock absorber Check and isolate the wires.. I have the same problem on my car. Running diagnostic VDM says front left satelite failed. Status failed on all 4 EDC. Delete fault codes and the car runs okay and i can choose comfort, sport and sport+ until the next time the error pops up. It is raining a lot, i have to waite for a sunny day. I will update.
i got same problem in my BMW X6 , its burning the fuse i try up to 10A, burned at the moment of plug always. Could someone help to find the reason ?
Follow the circuit...
If the fuse blows then you should be able to easily find the culprit circuit...
👍👍👍
thx a lot :)@@LMAutoRepairs
Nice
👍👍👍
Same problem with the M SPORT 7 SERIES
Take a look on my ansvers for Tungzin. BMW cars have a lot of electronic sensors. They are very sensible for error like rust on the level sensors. I suppose your car has EDC shock absorbers and air suspention. The level sensors are used to level your car in all wheels so the your lights works perfect. Overtime the level sensors get tucked and do not move easily up and down after the road. The normal error is Dynamic damping control failure. Corner ability restricted. Saft and dust is the enemy of the level sensors. I recommand you to do a total clean service removing all dust, saft, rust. Lubricate the balljoints with wateresistant oil. Good luck:-))
top
Thanks!
👍👍👍
Please take my espace...please