Front brake pads replacement within 15 minutes
HTML-код
- Опубликовано: 24 июл 2024
- How to replace front brake pads within 15 minutes. Pads replacement on a Peugeot 206 HDI 2.0.
This video does not constitute or replace a real specialized technical manual, and was only made for convenience and educational purposes. "TutoBuild Eng" makes no warranties of any kind and accepts no liability. "TutoBuild Eng" cannot be held responsible for any damage caused to devices or persons using information contained in this video. The use of the information contained in this video is at your own risk. 
Авто/Мото
![Young Nudy - John Wayne (feat. Metro Boomin) [Official Video]](http://i.ytimg.com/vi/NY8HnYYo2fo/mqdefault.jpg)
I like to add one tip to this if you loosen the cap of the break cylinder container and it will make pushing the cylinder alot easier.
i like the way there is a narrator on this and we can see good close up of the mechanic
15 minutes went from dark to light again lol 😂
Thanks
Easy to understand with no anoying voice overs :)
First of all I really loved your car, all the guide is really informative and the step by step guide makes it easy to understand any one can try it at home. I am not strong for all this word that’s why I prefer manyautosltd.com to do the work for me
Straight direct and right to the point.The way i like it thankyou "very helpful". From OKC-U.S.A.(Coffey King said easy to understand and not annoying-he is correct)!
Love how he wraps his leg under the car like he wants to be in hospital.
a very comprehensive video. good detail, thanks!
Great video
Nice video thanks as it makes it nice and simple.
All respect for such a professional and smart work
Excellent post thank you very much saved me 70 quid
If you have tools, that is.
☺☺Thank you so much it was very nice and easy
sure got dark in 15 minutes
Joe Brunzo lmao
i saying the same thing
My thoughts 💭 exactly
Must be winter
😄😄😄😄😄.Thankyou!! You made me laugh.
Thanks for sharing this. Keep it up
Great video.
very useful video . i enjoy it thank you
Indiàs
if you have abs do you have to disconnect the abs fuse or battery terminals if you are pushing back the break pads as i was told it could effect the computer.
You forgot to grease brake pad contact points. And it is good to bleed the brake fluid.Used the old pad to push back the caliper....
Larry Bui you don't really need to bleed the brakes but he didn't put a single bit of great anywhere which is bad.
Bluelight Gaming not entirely necessary as the pads had an anti squeak backing pad. Some mechanics apply grease to the pad guides, others don't.
Gary McNicol regardless there are other contact points that should have been greased.
Larry Bui You don't need to bleed brakes unless you have had a leak releasing the break cylinder cap will push any excess air out the top of the cylinder.
think you mean put pipe on bleeder nipple ,pipe into bleeder bottle ,open bleeder nipple push back piston with old pad, close nipple,clean ends of pads that slide in carrier,also clean and lubricate calliper slide spindles.
BEST ON THE NET. NO UNNECESSARY ROTOR REMOVAL CRAP EXTRA STEPS
Thnx Mr silent
so what's the copper paste for?
I got to removing the lower caliper bolt, but it was too tight, i kept looking at the jack and thinking if i push on the wrench really hard something might give way, so i gave up on it
Is the distance between the screws of the holder 8.1 cm?
Wow! It is vey easy.Thank you!
if one of the dual piston is slightly leas compressed than the other one maybe by like 5mm will it make even contact once i pump my brakes during normal use?
Thanks 👍
Wht kind spray you using to clean brake
thanks greet jobs
This was 2 days at the least
should say always depress the brake pedal after fitting new pads to take up slack, and centralize everything. If you don't do this first time you drive and brake you will go straight through the car in front
Mark Ullyett watch the last few seconds of the video 😉
what's the best torque
Title: Front pads replacement within 15 minutes.
Me: He literally started during the day and ended in the middle of the night.
me sacaste la duda
How did you get the front wheel to stop from spinning like that? I can't figure out how to stop it turning when i try to undo the bolts.
Terrarium Firma break wheel nuts whilst wheels on the floor or have someone apply break
@@owenaylward Thanks man. But what if i am removing the brake, like changing the disc or the pads?
😂 u kno whats funny...video title in less then 15min...but when u see video my dude starts in daylight and goes up all the way to night time
What's the torque pounds set # or it varies in every car
Every car is different it should be stated in the car manual
Is it relatively same to change the rear brake pads..?
more or less if you have 4 wheel discs. Way different if there's drums in the back.
what do I do if I don't have that tool to push back the piston?? :/
Use a G-clamp
Andrew Parker: u can use a C-Clamp or before u take off the old pads use a big screwdriver or piece of metal to push it back manually but a video showing u that trick is easier than explaining
Channel locks work
Good video, my pads came pre-fitted with new springs, £10.95 from ebay delivered! It would be most handy if you state the bolt sizes, looks like 14mm on the caliper. also the recommended torque.
fgz
what's the best torque
Do you have to pump the brakes when you change the pads and discs on one of them wheels or is it recommended to pump it only when you have changed both sides?
Hussnain H
When he took out the old brake pads, I haven't seen removing any springs.
Can anyone tell me what is the role of this springs ?
Thank you !
The springs were attatched to brake pad when he took it out
What is the name of the tool at 1:36?
it's a micrometer. Digital calipers will do the same job
you forgot to clean the piston,you dont greace the pads and forgot do clean the caliper, BIG FAIL
How'bout open the brake fluid reservoir a little when pushing the piston back ? or greasing the guide pins ?
@@TheJuan72 ...or clamping the flexi hose and opening the bleed screw to stop fluid knackering the master cylinder seals
00:01 Brake pads replacement within 15 minutes
01:49 Continues in evening
04:05 Tomorrow morning
06:59 Tomorrow evening
08:33 Early morning the day after tomorrow
😳😳
Lol was thinking same thing
By caliper piston compressor, you mean a c clamp and a block of wood right?
Also, it's good to mention to remove the brake fluid cap, as the excess will need somewhere to go, then top off after completion.
👍
What make of car ,is it ?looks like a Toyota echo
Peugeot 206
2 clicks off the torque wrench... very proffesional lol
Khawaja asif
It took him 4 days to finish a 15 min job lol
Use a knee board and don't place leg under car frame.
Why you have to push so hard to fit the pad in there is cause you forgot to clean the surface they rest on.
Hey old but those brakes were still half life
Those pads had fucking heaps of meat on them!
No brake lube will never work right
I feel sorry for new pads
15 u mean 2 days lol
this is cowboy stuff, where's the lubricant?
Only watched this to see how to reset caliper, imagine my suprise when you use a tool 🙄
You can use a C-clamp or a set of channel locks as well. Although that tool is like $10 at autozone.
I dont know why am watching this ,i dont even have a car ,am 18 :]
What the fuck is CALIPA lol
Any decent human being would change the disc along with the pads surely I know it's a cost but if your doing it yourself on a car likes yours it'll cost no more then 50quid I mean using the micrometer for the disc check is great practice but just change them a life is worth more then a disc
No way,,, I will not allow this chap work on my vehicle ,,,a danger to the Motor Trade...
scary fem-bot voice.