The Toyota Hilux Gets A Sweet Fuel System!
HTML-код
- Опубликовано: 2 ноя 2022
- Fuel Pump: amzn.to/3Dw06bv
Fuel Pressure Regulator: amzn.to/3NuHFsm
Fuel Pressure Gauge: ebay.us/Rf4Rld
6AN Line: amzn.to/3gXHaL2
6AN Fuel Gauge Adapter: amzn.to/3fu1Ee2
Carb Fittings: amzn.to/3fyBxmi
6AN PTFE Fitting: amzn.to/3Wrp0S6
6AN PTFE 90: amzn.to/3DV6hHy
6AN 3/8 Fitting: amzn.to/3UkDmCa
Choke Cable: amzn.to/3T0zEwb
Check out my website! avrcustoms.com/
Follow me on Instagram! / austinniemela
Camera equipment used in the video!
Sony ZV-1 Camera: amzn.to/3N0SksQ
Rode Mic: amzn.to/3OnQUKw
GoPro: amzn.to/3ty94RJ
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003 Развлечения
Man this project is coming out so clean! I haven’t seen a Yota this clean in 20 years. We use to buy and sell them back in the day and I’ve owned my share with my favorite being my old 87 SR5 Turbo.
I was expecting to see you CeraCote the pressure regulator. I know that you've done a ton of other pieces but you don't really have standard grey pot metal anywhere else... I don't know if that was intentional or not, but its at least a suggestion. lol. The build overall is insanely clean and you have tons to be proud of!!!
You're to the part of the build that's really fun for a builder. This is where your vision becomes a real truck and it's looking great.
Please ceracoat the fuel pressure regulator mount the same color as the carbs and valve cover !! Thumbs up as always
Looks like this might be the ultimate Christmas present.
Awesome video as usual.
Great trick for the cable too!
Can't wait to see the next installment of this build.
Cheers from Sydney Australia MATE
🇭🇲👍🦘🇺🇸🇭🇲🦘👍🇭🇲
Looks great. All the detail and quality parts is what sets you apart from others.
Looking great Austin, I liked your tip on the cables, you can solder the section before you cut and that stops it fraying too.
That engine is looking sweet, Looking forward to seeing it fired up .
Austin, we need to have a cars n' coffee here in town!! With you as the Special Guest... I think it would be a great success. This thing is looking sooo good. 🍻
So awesome love the old school mixed with the new school that trucks going to rip and be reliable, man what a beautiful truck
Literally can’t wait to hear this thing run. Love the 22r’s!
So satisfying seeing all the pieces come together , so much art and talent my guy keep it up ! 👌🏻💯
Nice clean installation!
3:56 i think you should make carb bracket to support the load... vibration could make leaky connection
Are you going to satin clear coat the body ? I know that the rat rod guys have a variety of methods to preserve the patina and are simple applications. You could door a faded shop logo on the doors even just for kicks..... truck is coming along and looking great. Looking forward to seeing what's next and the final outcome. You haven't even given any teasers for the FJ lol... looking forward to seeing that build too.
Awesome stuff. Can't wait to see this Luxman running
Can’t wait to see this thing run.
Everything my boy touch is as clean as it gets , Austin you are a beast
I have an old International Scout that had a small crack in the fuel fill tube. I tried to fix it by cutting it in half and using rubber fill tube to splice it back together. The first time I filled it up after that I could hear a ticking sound. I didn't realize that it was static discharge until it caught on fire. It was quite exciting at the fuel station that day.
You have made skills my friend. Best of luck with the project completion.
Looking good. You do really nice work.
This is great I have a 1977 Toyota pickup same engine but a different body style and it needs a new fuel pump so thanks man
if you install gages where there is alot of rattle or shaking you need to install some kind of bushings to stop it from hitting the gauges. is an engineer thing and has to do with fire wall construction. that's why you don't see gages on built cars under the hood often. they go out quick and cause problems with miss reads. put it behind the fire wall for the best effect and read.
So pumped for this build LETS GO!!!
PS i think it would be cool to keep the heart stickers on the pillar (10:11). like the same red as on the weels maby?
Great job. Thats a labor of love on that mini Tpypta Hilux.
Sorry Toyota. I was half awake but I had to catch up on your progress. Keep it up!
Austin you are converting this Hilux into a piece of Art, as were all your previous projects. Eagerly waiting for the red landcrusier project.
I'm looking forward to hearing the sound of an engine 🎶😀nice job you are skillful
I can already hear them carbs singin💨💨
Austin you the Picasso of Yota restorations cant wait too see what you do with the fj40 🔥🔥🔥
Love the 22RE. I'm sure it runs as good as it looks.
Quality work as usual.
Your vid’s are sick bro you should make more vids of you using the trucks that would be badass 💨
gorgeous build man
Great fuel line build Austin. Looks like everyone a winner????
Es algo mágico lo que estás haciendo ,será una cenicienta
That engine bay is so good.
Can’t wait to see this hit the road! We’re so close
Nice work I wish I had your skills and abilities‼ Want to install an LS 5.3 L33 with a Tremec TKO in our 5 lug 07 reg cab Tacoma? I have the NOS TKO & just purchased an 06 L33 that I’m having refreshed by someone w/ the proper tools & skills. My bucket list…
Looks great dude.
Hopefully you read this Carter does make a in-tank fuel pump the claim 3 psi but my gauge at the carb reads 4 psi but mine a 32/36
hey man. how did you run line from gas tank to fuel pump? any tips?
Hell yeah brother! Looks good and learned lots!
Thanks bro!
Cerakote those parts in the burnt bronze and powder coat the control arm the red!!!
Tengo una se ve criminal tu guagua 💪🏽💪🏽💪🏽🔥🔥🔥saludo desde PR 🇵🇷
You’re build Is very nice and I’m not kicking anything but if your pump only comes on in the crank position that returns when you let go then it might be a problem 😂 and also I like your thinking on the oil pressure “safety” with the pump. Buttt the carbs will run for a solid minute or so before the motor will die on the fuel they have in their bowls. Keep up the good work man. Carbs are a whole other ball game 😅
The pump will continue to run once the engine is started using the factory wiring like I did! Not like the factory pump quit when the engine is running haha thank you!
I see you don't have the brake booster connected. Have you considered doing a booster delete? Chase Bays makes a universal kit, but they may already have one for the Toyota.
very nice fitting
Brah sick Toyota Hilux🤙🏽
Yo I love it ...from Kenya with love....BTW both niemelas channels are dope big up
are you going to swap out the stock fan for a flex fan and adapter on the engine?
Very nice work as always. I would reccomend an extra ground wire from the fuelgauge/old pump assembly to the frame. If the tank supports get corroded, there will be a bad ground. Result is a strange acting fuel gauge and fuelpump issues.
Well I suppose, but my fuel pump is grounded to the frame with a wire.. seems like about everything on these old trucks ground that way!
She's looking great!
I noticed that on your hilux that the petrol pump is in the fuel tank on my hilux its a mechanical pump and its bolted to the side of the motor
Looking great man
Would it be possible to add at digital dash on these maybe something from the 80s
Engine looks sooo good in there and I like the Pro tip with the torch and drill to do the cable ends. Cool how you wired the fuel pump to the oil pressure switch. Gotta be safe. I can't wait to hear it run with those dual carbs.
What is your suspension on the red truck?
Love this truck
Questions make video about swapping out toyota pickup 1980 20r engine putting 2rz what part need to be added .
That my next project need some advice can help
Hi this BRIAN
WHEN PLUMBING HI - PERFORMANCE HOSE AND FITTING you should use PTFE TAPE AND ALLOY SPANNERS
He seals them at 9:50
What was that bronze fitting that you pressed into the firewall for the regulator? Basically a nut?
Those are called rivnuts.....the tool flairs them into sheet metal and they are serrated to bite into the metal to help prevent them from spinning although sometimes they still do lol.... they are a great tool but take some practice in installing.
Yeah it’s a threaded insert.
عمل رائع
where Is The Long tube header from ???
What kind of HP you think you will get to the wheel?
Not a lot. Maybe 120. Maybe.
Dam beautiful.
Bummer wanted to hear open header on that 4banger
Nice 👍
Austin, wood in the bed. Use same color of motor or a stain close to it.
What type of air compressor do you use? Awesome channel btw!
📩📩congratulations you're shortlisted among the winners today use the what'sapp number above to DM ✍✍👆👆
Nice nice nice!! 1k like 🙂
Please tell me you are going to upload a long video of this full build when you are done.
Sweet
متى ستقوم بالعمل على جسم السيارة الخارجي ؟
They call for 3 to 3.5 psi.
Floor mats
Am from Pakistan
Nice truck but need a nice paint job
Motor 22R
Did you ever grease all the wheel bearings and all that s***
Have you heard of deadbeat garage looks like the same colors you chose
Not a fan of mini trucks. But dang it’s pretty.
👍🏼👍🏼👍🏼
Austins toyota > Sema
All that bling for an engine that makes 50 horsepower
Fail.
👍🇺🇸👍
😘😘😘😘😘😍😍😍😍
🇮🇶♥️🌹🥰
Hey Austin. I think there's a scammer that's hacked your account
Yeah happens every video
Commercials are getting out hand ✋️ ☹️
No an wrench... unfollow
WoW. That’s a bit much.
😂😂😂
Saweeet!
This is very good 😍😍 bravo👏🏻👏🏻🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦🇸🇦
Es algo mágico lo que estás haciendo ,será una cenicienta
Would it be possible to add at digital dash on these maybe something from the 80s
80s weren't digital. Have to go aftermarket
@@REAPER3fitty soarer? 80s where digital maybe just not in the states