I've watched plenty of videos for HPA beginner's, but none of them actually explain how to safely use the HPA bottle and regulator. Thank you for this video!
Can’t we use that HPA regulator on higher pressure tanks? Since it can be regulated to the appropriate operating pressure by using the adjustment knob?
What is the low pressure valve setup you have on that bottle? Looking to use an HPA tank for an application that would need me to regulate to around 100 psi to get the CFM I am looking for in the application.
You can store HPA in your tank without any issues. I always fill my tank before I leave the field so that I can make sure the gun/regulator is running smooth before I play next time.
ruclips.net/video/Zjbi4iAl8DU/видео.html&feature=share Prairie dog airsoft goes over the math, what you need, etc. Use his equation to calculate it, and even though I know what the PSI is, idk what the cubic measurement is of the tank your talking about so I can’t do the math for you. Thank me later, or if you wanna give me the cubic measurement I can do the math for you
This is a good video (no hate) but I unscrewed my reg without unscrewing the green thing and then this exact ref deiced to treat me all weird because i did that and acted like it seemed as if i didn't know how my gun worked.
I've watched plenty of videos for HPA beginner's, but none of them actually explain how to safely use the HPA bottle and regulator. Thank you for this video!
Short, simple and gets to the point. Thanks.
Thanks for this! Diving into the HPA world.
Great simple guide and is very helpful. Thanks!
Best video out there for beginners!
This helped me so much, thank you!
Exactly what I needed thanks
Perfect guide thank you!
Life savor, thank you
Thanks bro appreciate it!
thats a really nice video thx
Cotton you built like the OG Atari VR glasses
>:3
Can’t we use that HPA regulator on higher pressure tanks? Since it can be regulated to the appropriate operating pressure by using the adjustment knob?
What is the low pressure valve setup you have on that bottle? Looking to use an HPA tank for an application that would need me to regulate to around 100 psi to get the CFM I am looking for in the application.
Is a hi capa not custom fit with the tank ninja 48/3000?
Thank you
I screwed on my regulator to the tank and the PSI thermometer didn't go up I'm assuming there is no air going into the regulator so what do I do
Are SLP tanks better than the others ? also does it effect FPS ?
When I try to release it the psi dosent go lower in the regulator if I want to turn it down
You have to use a slp tank to use this slp regulator right??
Hey what happens if u can't turn it black knob to raise the oressure
Wait so does it matter what tank I use like can I use a valken tank
I have the same tank isn’t it Non SLP
Do you have to use slp regulator?
How many psi is a hi capa?
Great video
I have just Hpa tapped my umarex mp7 gbb does this mean that 120psi is to high for me ?
Any answers would be appreciated
Thankyou
the standard operating pressure of green gass is around 115 - 120 psi. if the gun is built for green gas, 120 should be fine.
What would I put the pressure for a m4 p* jack. Just getting in to polarstars and I don’t know.
start at 80psi
So they don't make these for powerful hpa airguns😞
I know this is an old video but how many shots would you get out of a tank like this?
I think around 1900 but don’t quote me on that
Can I store the hpa in the tank or do I need to empty it ?
You can store HPA in your tank without any issues. I always fill my tank before I leave the field so that I can make sure the gun/regulator is running smooth before I play next time.
how many shots would y ou hypothetically get on 3000 psi with one fill?
on like 80 psi regulated
ruclips.net/video/Zjbi4iAl8DU/видео.html&feature=share
Prairie dog airsoft goes over the math, what you need, etc. Use his equation to calculate it, and even though I know what the PSI is, idk what the cubic measurement is of the tank your talking about so I can’t do the math for you. Thank me later, or if you wanna give me the cubic measurement I can do the math for you
This is a good video (no hate) but I unscrewed my reg without unscrewing the green thing and then this exact ref deiced to treat me all weird because i did that and acted like it seemed as if i didn't know how my gun worked.
i will continue to treat you weird
Can you store the tank with air in it?
Yes
Where can I buy a slp regulator for my tank ? Online
Amped airsoft
When u say everything not stock in a hi Capa do u mean like everything
mostly slide and bbu
is the tank an slp or lp tank
doesn't matter same process for both
Okie
Regulator* in the title
ur right thank you
how much fps is 120 psi
depends on the gun/barrel length
what about for polarstars, 120?
yes
OK OK OK OK OK OK
theoretically and hypocritically speaking. kind of missed the KEY detail as to NOT Point towards your face as you turn it on/open value.
My tank has a output pressure of 800 is that okay?