High Pressure Air Tank Hand Pump (Max 4500PSI) For PCP and Paintball
HTML-код
- Опубликовано: 12 май 2021
- Website: www.mcsus.com
This three-stage pump with inbuilt filters is ideal for filling most PCP airguns and paintball air tanks.
Link www.mcsus.com/products/air-ta... 
Спорт
This was a slick way to motivate us to buy that $550 Umarex air compressor on your site.
Finally an actual break-down/review of a pump. Good job. Looks like a hell of a workout 👍👍👍👍👍👍👍
it's true, he they did a great job.
after pumping you forgot for what you was here :) not for me never :)
6:31 The Boss: "[Stop pumping] and bring the pump over here." Fit guy's thought bubble "thank God, man did that suck. I ain't doing that again." Me: "Neither am I."
I liked the video for Carlo's sake.
No way! That is nuts. But I'm old, so manual labor is always hard
So, compressor is the way to go. lol
Kidding, these would be useful in a pinch. Thanks for the video.
Ye compressor is nice but 3k+😭
Cool product!
Is there a non electric, non gas powerered, human powered air compressor for pneumatic tools. I have 20 gallon portable tank but at 5CFM at 90 PSI I really think I'm going to run out. I won't be by any electric. I suppose I can buy another compressor and tank, or a gas burning compressor if I ended up runnning out way faster than expected. But since it's just 90PSI vs the air gun's 2500 psi I thought there may be a manual option???
how to keep 'warm' in a deadbox.... top off your tank with manual pump.
At 1:10 minutes in, you display a HPA to schrader valve adapter. Where can I get that part?
Bought a similar pump to fill a 2L compressed air cylinder for scuba diving, but it takes 2-3 hours of non-stop pumping to get it to 50% max pressure. Wondering if I'm doing something wrong, or is it just that hard? There are no leaks btw.
I got the adaptor and followed the instructions to pump it up and see if there were any leaks. I pumped it up and then proceeded to release the clamp and broke my monitor.
I know a guy who has a 4500psi hand pump. It gets harder to pump after 2000-2500psi.
That depends on your fitness lvl……
How many Pumps will it take for lets say a 13CI 1100 psi output tank? or a 26CI tank? how many times you gotta pump it? oh you said 5 to 6 minute pumping but just kinda pumping not super pumping ok got it. Does the air tank tell you when its full what if you over pump does it blow up or something lol? I am a straight NOOB to these I only used 12g ON airsoft guns im new to markers so someone fill me in yo!!! IS there a FREE way to get it pumped? like getting air in your tires in california can you use that machine to and attached your hpa to fill it LOL?
i can hear him smashing the pump up in a rage , dont forget to wear a rucksack full of bricks for the last 1000 psi 😁😁😁😁😁
He looked a little beat with just 2500 PSI in 5 min. And he is a decent size guy. I can’t image spending up to 10 min pumping.
🤭😁😁. C’mon man you know that was a good one. lol hehe
A strong servo, maybe a wiper or car seat motor, a few bucks worth of metal parts, any DC power supply or battery and VIOLA!!! ... 10 mins of watching it pump itself with a smile on your face. I have no idea how much an electric pump is, but you can get these 4500psi hand pumps for 50 bucks nowadays, so the whole thing would be under a Benjamin. If ya use it regular, I think it pay for itself exponentially in short order. Just a thought ¯\_( ͡° ͜ʖ ͡°)_/¯
Much love!!! ✌
ϻя.ƹ
he was lazy and barely pumped.
It’s not bad… and if you keep at it, obviously it gets easier. I have a Benjamin hand pump,like the one I’ve seen him use in a diff video… it works really good! I’m excited to convert some of my tanks over!
He didn't do it properly (it actually takes a bit of getting used to), and tbh that sounds like a good prep work before running through a forest with gear xD
I have the same Benjamin pump that you do.. it works very well! Especially if you give it time to fill on the upstroke. Where can you find the adapters for the conversion on the tanks? I have 3,and I’d like to use them! Instead of them gathering dust! Thanks for the great idea!!!
If you have the same pump can you confirm that it takes this little time to fill a similar size tank? I would have thought it would take a couple of hours to get to that pressure. Would appreciate some info as I'm not sure to get a pump or go the extra and buy a compressor. Thanks
@@cotteeskid So here’s my 2 cents….. I can pump my Air Venturi Avenger in about 4-5 mins depending on how good I’m feeling..it tops out at 300bar,which I think is above 5000psi? Not sure.. but yes it can be done. Just depends on your motivation lvl..the strength and stamina come on pretty fast. I can pump my Diana Bandit up in a little over a minute. 50cc tank…
@@cotteeskid Now that I’m looking at it… that’s not the same pump as mine.. Mine is actually better.
@@shawnstone4949 Excellent. Thank you for the prompt reply. I don't mind putting in the effort but one video I saw indicated over an hour of pumping and if you were under a certain weight you might struggle towards the end. Cheers.
Hi i have the same pump.. and when done pumping and bleeding it. It releases all the air in the tank.. what am i missing?
Hey man, I've got the same problem... Did you find a solution ?
the VEVOR 3-stage hand crank pump with high quality 301 stainless steel, crank pump 4500 psi (0-30 MPa), PCP Air Gun Rifle, PCP pump with pressure measurement range: 0-5800 psi (0-40 MPa)
has it allready adapter for filling 13ci tank?
How can I get one of these pumps to buy
My Guage on my 13ci hk tank goes to 5 notch but it says pump up to 3000 or the 3rd notch. Should i stop at 3 for full load or go all the way to 5th notch?
stop at 3, that's 3000psi
@@mcs4us thanks for replying. I appreciate the support you guys always provide. 5 star company.
That was great except you took out the one way valve to lubricate it but didn't show how.
I'm going to purchase a $1000+ HPA pellet gun but there's no nearby fill stations.
I was going to buy a CO2 tank but couldn't find an attachment for my CO2 cylinder.
A HPA compressor would cost $800 without the attachment.
In short, this is a cost effective way until I can buy the electric compressor.
so many lazy ppl in the comments haha the fact you can pretty much fill almost fully your hpa tank in 5min is amazing. and way cheaper than buying a legit compressor. its a no brainer.
Yeah, you'd have to have no brain to buy it in the first place.
Will this fill up a car/truck tire to 45psi?
It pumped that tank to 2500 psi in 10 mins ... so yeah, I think you'd get your truck tires taken care of ... I doubt you could seat a bead with it easily, but short of that, you can pump up just about anything ya wanna with this bad boy! Hope it helps ya out
Much love!!! ✌
ϻя.ƹ
you and then you can go further until it explodes
So these pumps would work for airsoft hpa tanks?
They certainly do. You have to put in a good amount of effort to get it above 2000psi though.
Be careful with that forklift!!!!
ditto
drop those forks if its not in use!
The fit man almost passed out pumping a min tank.
So how many pumps for the LCS SK-19 or a Hatsan Blitz & how many shots on a full filled tank?
lmao fit? guy was barely pumping and looked like no effort hardly. the fact it took only 5min to almost pump it up to 3k its impressive and for way cheaper than a compressor
Read my last comment lol🎉
Does it come with a manual
Yes it does
Is this worth getting?
Yeah I got it worth it for sure
No
what do you think? u really going to ask others after watching yourself? are you as lazy as his employee pumping for only 5 min and then complain about it after? or do you want to drop 500$+ on a compressor?
And no one is going to say anything about them forks of the lift?
Lol after watching this video I can safely say I no longer want this thing xD
me too :) this is insane
So can I use that to fill up co2 tank
Yes it magically takes c02 from the air and puts it into your tank
Idk if what you are using has an HPA converter mod (which allows you to run compressed air), but if you can find one for your gun, that would be your best bet. If you want to fill up your co2 tank, you'd need a reasonable sized refillable tank to do so and lug around. There are gas refill locations, which help if you also run nitrogen and helium (helium is more for pcp airguns and is incredibly niche). They easily can refill CO2, just you might have to look around since some seem more geared toward filling industrial tanks over consumer ones. Hope this helps and have fun shooting!
hahah
Poor Carlos...hope he got a bonus in his wage packet for all that effort?
Awsome video tho!
Carlos!!
THATS BULL I HAVE THE SAME PUMP AND IT TOOK ME ALL DAY TO GET 2000 SO YOU ALREADY HAD IT FILLED
130$??? i found it for 50$
HOW MANY LICKS DOES IT TAKE TO GET TO THE CENTER OF A TOOTSIE ROLL POP?!!!!🎉
He’s not finishing the strokes either…. That helps.. he would’ve been done already at 4 mins
6min of pumpin :/ my god nor for me
Dude more MOVIE MAGIC could not show us if the tank had any air in it first huh. Bro do you work for MCS cause honestly you really compose/compromise your videos and information to the public in a horrible way. I mean to the point where someone will get hurt. And am I the only one who has realized that his numbers and information is not accurate. I watched him put in a c02 cartridge the wrong way. Upside down and inside out! We all know some go up and some down. WTH are you ok? But you don't? 😮 These channels are getting outve hand truly....
A big servo, a couple pieces of metal, some bolts or hinges, and you fellas will have a pumping station robot to do all that for ya, maybe 50-60 bucks worth of stuff ... just a humble, pro-bono thought to bring a little more freedom into your lives. Maybe it'll help ... I hope so anyway.
Much love!!! ✌
ϻя.ƹ