CP1660 Manual Programming|Cp1660 radio

Motorola CP1660 Manual Programming
including :
How to unlock dealer programming mode
Step by step frequency programming
Enable & Disable Channel
#Motorola Programming
#Radio Communication
Pls. Like & Follow my FB Pages
/ vhong920

[@lg39inches45]

may bago na naman ako natutunan pag proprogram ng radio sir..Salamat sa pag share tutorial.

[@igcvlogs1725]

Salute idol marami ka pong natutulungan sa pagshare niyo ng kaalaman sa pag proprogram ng radyo.

[@ajoemar2009]

Thank you lods. Hesitant ako kumuha neto. Kala ko di mag match ctcss ng baofeng at tone ng Motorola. Pwede la pala. Thank you 😊

[@VhongRadioCommunication]

Welcome sir

[@oyaradzki6644]

Ang galing sir. Napakainformative.. madali lang pla magset up nag radio. With your help sempre heheh thanks ulit

[@delmarebdao4356]

maraming salamat boss, laking tulong talaga nitong vid mo.

[@VhongRadioCommunication]

Welcome sir ... Thanks sa support.

[@NikYelsPlayGround]

Interesting, may knowledge na ako ngaun about dito. Thanks

[@enzorhenzgamestv5497]

Salamat sa pagbabahagi Ng ganito. Daming natutunan sa araw araw tulad nito.

[@VhongRadioCommunication]

Welcome.

[@ForeignFamilyinJapan]

Verry usefull tuturial sir thumps up and keep vloging po

[@VhongRadioCommunication]

Thank you idol

[@alenbloomsu.c.e.2343]

Ang galing nyo naman po, ituloy nyo lang po ginagawa nyo na magshare

[@adriannazareno4551]

Ok po yan lods maganda po yan gamitin lalo na pag nasa in case of emergency.

[@Ka-Chika_Vlog]

Thank you idol for the informative content..keep vlogging po and uploading videos.

[@VhongRadioCommunication]

Welcome & Thank you po sa feedback

[@estrellaallyssa2126]

Thankbyou po for this very informative video 👏😊😊

[@CamoteBros]

Maganda po yung information lalo na po dun sa pag program ng frequency

[@VhongRadioCommunication]

Thank you..

[@jammar2745]

New friend here.. Tuloy tuloy mo lang yan.. Godbless po

[@lizatv4023]

Salamat sa pagshare mo ng iyong kaalaman sir!

[@nanetz3630]

This is very helpful po ,thanks for sharing

[@siraries1319]

Very helpful, thank you dito lods.

[@anneganda1899]

Hi idol ang galing u pala sa radyo

[@estelapagarigan6547]

Thanks for sharing this video sir.God bless po.

[@jessicaanntorio8746]

Thanks for sharing your knowledge. It's really helpful

[@beshiebeshchannel]

thank.you for.sharing..keep. vlogging an.informative contents.

[@VhongRadioCommunication]

Thank you po.

[@tinesvideos1980]

Thanks sa info idol.. Kept safe and God bless always

[@jyapoksvlogsofficial]

Maraming Salamat sa inpormasyon Idol.

[@VhongRadioCommunication]

welcome po

[@nhenhelyn6674]

Very informative and useful po, continue vlogging po godbless

[@VhongRadioCommunication]

Thank you

[@petslifeincorporated6553]

salamat po sa demo. patuloy lang sa pangarap lods. tulungan lang at pananampalataya. gbu

[@VhongRadioCommunication]

Thank you. Godbless din po

[@amymata3165]

Galing nyo naman mag turo idol

[@VhongRadioCommunication]

Thank you po

[@melyarnvlog1671]

Thank you Poh! Keep vlogng poh!

[@jamesblanza6282]

very helpfull po nice content lodi thank you for sharing

[@joelabadcaraca6878]

Thanks for sharing your ideas sir God bless

[@cristyontv2889]

Thank you po sir for sharing this tutorial

[@lynnebschannel1315]

Very informative content..keep it up!.

[@iced2019]

Thanks for this video

[@xianeraki2622]

Thanks for this video, it’s so informative.

[@VhongRadioCommunication]

Thank you

[@dharryb4868]

Salamat sir

[@VhongRadioCommunication]

welcome po

[@loloveskhochannel9578]

Very useful and nice info sir

[@kunyangtv5314]

Thankz for sharing lods

[@lovelyursulamila9507]

Thank you for sharing your vedio lods, keep it up po God bless

[@user-eg1kn9sr2i]

Ser gud morning po

[@VhongRadioCommunication]

Gud day sir

[@ninjanidextermanalo4858]

Ow this is helpful thankyou..GB

[@ztantheexplorer802]

Ayus na ayus yan old school na cp

[@RDGhoods]

salamat sa info lods.

[@missqueenbeetwo.7383]

Very helpful geat job.

[@ruelsalvadorbon7341]

Ganda naman ng radio program nayan kahit malayo rinig mo kausap mo

[@teamrsfundal5867]

Nice tutorial idol keep vlogging

[@lee-annchannel8019]

Salamat po sa pagbahagi ng iyong kaalaman keep vlogging po

[@jeanpaulpaje1447]

Idol salamat sa tulong na program din yung radio pero palaging umiilaw yung radio at medjo maingay. May kailangan pabang i settings nito? Salamat po

[@VhongRadioCommunication]

Welcome sir..

[@21lyn46]

ang galing u nman po

[@VhongRadioCommunication]

Thank you po.

[@kironmancao6438]

Lods pa review din po ako ng gp338 motorola

[@jhenleeofficial3221]

thanks for the info ❤️

[@mbachecha]

gud pm po, ask ko lang bakit di ko ma palitan un frequency na 436.0250 to 136.0250 sa bagong CP1660 Motorola, di ko tuloy mapag usap un luma at bagong radio

[@VhongRadioCommunication]

cp1660 ay single band meron lumabas na uhf at vhf malamang yung luma radio mo ay VHF nag start sa frequency 136 to 174mhz samantalang yung gusto mo program ay UHF start sa frequency na 403 to 470mhz up kaya di xia puedeng iprogram sa bagong radio mo.

[@nallaortsac6147]

Sir good evening po happy new tanong ko lng po kung paano po i set na magkapareho po incoming saka outgoing sa isang chanel lng po salamat 😊

[@VhongRadioCommunication]

Happy new year po... Tawag po niyan "simplex" parehas po yung program sa RX at TX frequency...

[@VhongRadioCommunication]

Meron po yan dian sir simplex programming sa content ko.. Ty

[@jessonjunio1334]

Sir hope pwede nyo i review ang motorola X9

[@VhongRadioCommunication]

Cge po pag may unit available sir review natin.

[@user-gl5ly7it4b]

Nakita kona sir yung cloning mo,sinubukan ko,pero MASTER ang nag appear.
Sinubukan ko ulit ang factory reset,ayaw din gumana,kelangan cgru tlga ng prompt or dos

[@VhongRadioCommunication]

Try mo program via software sir pag di pari umubra need na Palit eeprom yan.

[@pilotcharliejuliet1501]

Pwede po ba sa motorola P8268?

[@VhongRadioCommunication]

Iba po programming P8268 mo sir.

[@user-zj1dx2yr7y]

Sir saan po ba yung add.nyo,pagawa ko yung motorola cp1660,makarecieve ng msg pero hindi makapagbato,pagpindot mo sa ptt mawala ang cgnal bar.

[@VhongRadioCommunication]

pm mo ko FB sir search vhong gregorio

[@pilotcharliejuliet1501]

Pwede ba siya sa 108-136 MHZ sir? Pang Airband radio ko sana sa flight.

[@VhongRadioCommunication]

Negative sir airband sa 136mhz. Puede xia.

[@jiovannihospiciocabillo529]

Idol, meron akong baofeng uv 5r at meron din akong motorola c51 ung walang lcd, maka transmit ang motorola to baofeng maririnig pero pag baofeng na ang mag transmit mag iilaw lng ng green ung Motorola pero walang maririnig
Pwede pagawang video? Idol?

[@VhongRadioCommunication]

need mo po software ng C51 para mabasa yung program niya at iprogram sa UV-5R puede naman manual programming UV-5R..ty

[@LRGMotovlog]

Sir gud eve ask lang what if nahulog yong portable radio tubigan may pag asa paba maayos?

[@VhongRadioCommunication]

Puede try recover sir buksan po yung unit kung kaya tanggal main board (linisan lacquer thinner) at patuyuin po (bilad sa araw) at ibalik sa dati para matesting..ty

[@LRGMotovlog]

Nabasa kasi ng ulan ng tao ko kaya pina paayos ko sa kanya

[@LRGMotovlog]

Maraming salamat po sa information

[@VhongRadioCommunication]

Welcome sir..

[@aaronfontanilla7441]

ganun po pala pag set up nyan magagamit ko to as guide.

[@tyrahkjerstincruz3367]

Ask ko lang po yun kumikindat n number 4, pano palitan ng 1, ayaw po kc mpindot, salamat

[@VhongRadioCommunication]

cp1660 ay single band meron lumabas na uhf at vhf malamang yung radio mo ay UHF nag start sa frequency 403 to 470mhz samantalang yung gusto mo program ay Vhf start sa frequency na 136 to 174mhz kaya di xia puedeng iprogram sa radio mo.

[@user-gl5ly7it4b]

Yes,nagmaster yung pag.gagayahan ng freq.
Panu kaya yun sir.

[@VhongRadioCommunication]

Meron po ko video content kung pano magclone via cloning cable pasilip nalang po sa mga video ko sir may tutorial po dun kung paano procedure.. Ty

[@richmonnonato9374]

Sir bat yung cignus uv85 ko nakaka monitor lang hindi nakaka send sa motorola cp1660? Ano po kayang problema . Pero pag cignus to baofeng okay naman po

[@VhongRadioCommunication]

Check nio po kung may tone Ginamit baka magkaiba kahit same na frequency pero magkaiba tone dpo cla mag uusap.

[@richmonnonato9374]

@@VhongRadioCommunication na set ko na po yung tone pero di po makabato ng message . Pero nakaka receive naman

[@pilotcharliejuliet1501]

Sir tanong lang pwede ba siya ma program nga 403-446 MHZ na freq?

[@pilotcharliejuliet1501]

Hindi po ba pwede sa VHF?

[@VhongRadioCommunication]

Single band lang po kasi Motorola
CP1660 sir VHF (136-174Mhz) at UHF(403-446Mhz)lowband,(435-480Mhz)Midband
magkaiba po xia frequency band kaya dpo puede Iprogram kung d nia ka band. Ty

[@shadertv6101]

boss bakit yong radio ko ganon parin hendi mka program kahit nka dealer mode na sya time out at prim chanel parin nkalagay? pa help nman boss.

[@VhongRadioCommunication]

need niyan sir PC programming baka nakalock yung manual programming niya

[@kedstv9188]

Sir pa help po.sana ma notice mo ako.naka Chanel 1 po kami.kaso pag nilipat ko po Ng ibnag Chanel.likr Chanel 2 po.lalabas SA LCD nya parang nka japan.need po Ioff MUNA para mabasa ang channel 2.

[@VhongRadioCommunication]

Try nio po reclone o reprogram, read muna yung kagaya nia na program na radio at pagkatapos write sa radio nagloloko channel program.

[@strike_27]

Kuya paano e off ung "All Call" pagtapos kasi ng transmit lumalabas ung All Call same unit po

[@VhongRadioCommunication]

Need clone other radio or need programming software para matanggal sa setting.

[@user-gl5ly7it4b]

Sir nagclone ako ng cp1660 pero ayaw parin ehhh,nag factory reset narin ako,blinking red parin,channel error

[@VhongRadioCommunication]

Need na po Palit eeprom ic

[@gabinojamilojr8577]

idol magkaiba ba ang antenna ng CP1660 vhf at uhf?

[@VhongRadioCommunication]

Yes sir magkaiba.. mas mataba Antenna pag VHF kaysa UHF.

[@nicodemushongo436]

Sir pano Po mg lgy ng channel Po sa cp 1660 KSI hnggng 1234 lng Po Ang channel po

[@VhongRadioCommunication]

Sundan nio lang po yang manual programming nasa video ko sir meron po dian add channel. Ty

[@shoutout888]

Idol ask ko lng digital po ba yan at analog ?

[@VhongRadioCommunication]

analog radio lang xia sir..ty

[@pilotcharliejuliet1501]

Pwede rin po ba yan gawin sa ats 2500

[@VhongRadioCommunication]

negative po sa computer pinoprogram ATS 2500 sir

[@user-eg1kn9sr2i]

Ser pede po b ituro nyo paanu gumawa ng clonning cable

[@VhongRadioCommunication]

Nasa FB Pages ko sir diagram pm moko sir

[@user-gl5ly7it4b]

Pwd kaya gamitan ng TIDradio ang cp1660 sir

[@VhongRadioCommunication]

Pag same band puede pag usapin sir

[@user-gl5ly7it4b]

Kapag nakaclone ang nakalagay MASTER

[@VhongRadioCommunication]

@@user-gl5ly7it4b master yung radio na paggagayahan ng frequency

[@user-pt2md4nz8m]

Paano po palitang ung naka 3 para maging 4 salamat po

[@VhongRadioCommunication]

anong part po sa video....thank you

[@omenrois]

after channel, activate didn't show up, do you know why?

[@VhongRadioCommunication]

Maybe manual programming lock on VIA PC Programming.

[@junparaiso4894]

Sir pano po I manual program Ang cignus xt2 sa Motorola cp1660 marami pong salamat sir

[@VhongRadioCommunication]

Kung dpa po na papalitan ng program XT2 mo may default frequency yan may video po ako sa content (Uhf) XT2 default frequency. gayahin mo po yung frequency nkaprogram dapat Uhf din yung CP1660 mo... Ty

[@VhongRadioCommunication]

Eto yung video default frequency ng XT2.. ruclips.net/video/HS__HH6mFT4/видео.html

[@LRGMotovlog]

Paano po mawqla yong lock sa gitna ng LCD sir yong nasa gitna talaga

[@VhongRadioCommunication]

Long press nio po P1.

[@lorenzedenzelbautistayap3405]

paps pano naman po pag gagawing vhf ung uhf na cp 1660 na motorola

[@VhongRadioCommunication]

D xia puede sir gawin Vhf to UHF CP1660..

[@lorenzedenzelbautistayap3405]

Salamat sa info sir sayang pala itong uhf ko di xia macoconvert to vhf

[@enriquegonzales2752]

Paano po ba mag lagay ng beep tone ng cp1660 motorola po sir

[@VhongRadioCommunication]

Yun po bang pag nag TX pag bitaw may tunog.

[@enriquegonzales2752]

@@VhongRadioCommunication yess po sir

[@migueljrgalit466]

Sir may shop kayo papa frequency kasi ako baka pwede

[@VhongRadioCommunication]

Pm mo ko sir FB search Vhong Gregorio.. Ty

[@everythingelseisthere1266]

What else is there? Maybe you can make a tutorial on how to extend the range of Baofeng UV-5R and/or UV-82 radios. Let's say 10-20kms. - evit

[@VhongRadioCommunication]

Cge idol gawa ko ng vlog about sa request mo.. Thanks

[@brixtercallejodehitta]

Saan po dito para ma lagyan ng tone?

[@VhongRadioCommunication]

Meron dian sir sa video pano maglagay ng tone.

[@ryanjinglelomosbog3269]

Pano po ba ma troubleshoot yung connection ng naka frequency 300 at 100?

[@VhongRadioCommunication]

D cla mag coconect magkaiba ng frequency band sir.

[@brypaulsaintsantos3193]

nka repeater po b yan gnyn pg program o simplx lng po yan

[@VhongRadioCommunication]

Kung may repeater po kayo puede nio po program sa portable nio basta same frequency band.. Pero kung wala naman repeater simplex program lang po.. Ty

[@brypaulsaintsantos3193]

i mean nka repeater po kmi tpos gagayahin ko po yang gnwa nyo automatic po bang psok n s repeater dn yan ? salamat po

[@brypaulsaintsantos3193]

bakit po tama nmn po un transmit hndi po nkakabato.. pro un receive mron

[@VhongRadioCommunication]

@@brypaulsaintsantos3193 yes sir automatic na yon basta mapulot ka ng repeater makapag communicate ka sa iba nakasakay din sa repeater.

[@VhongRadioCommunication]

@@brypaulsaintsantos3193 pero pag dka napulot yung Bato mo ng repeater ibig sabihin dna kaya ng radio mo mareach yung repeater.. Malayo ka na sa repeater..repeater kasi yung magiging relay Station bago bumato sa kabila radio user.

[@bruh-254]

Pano mag set ng lower frequency d bumababaa sa 4

[@VhongRadioCommunication]

Baka dna po kaya ng range ng radio nio sir. CP1660 model meron siyang VHF Band (136.000 to 173.995MHz)
UHF lowband (403.000 to 440.000MHz)
UHF midband (435.000 to 470.000MHz)
UHF highband (465.000Mhz up)
Check niyo po kung san dian coverage ng radyo nio.. Ty

[@rodelotara2918]

Paano eprogram ang 1660 nag error chanel cya boss

[@VhongRadioCommunication]

try mo muna sir reclone sa gumagana radio pero pagganun parin need na palit eeprom

[@user-lw1sy9li3w]

boss yun motorola cp1660,hindin ko mareset
patulong naman po boss

[@VhongRadioCommunication]

Wala xia manual reset....need mo software at codeplug na may default program then clone mo via PC sa radio mo.

[@donrye9479]

Good day Sir, medyo nalito po ako nakarepeater po ba yung cp1660 bat magkaiba po yung rx at tx? Also sir tanong ko na rin may mdc1200 signaling po ba si cp1660? Salamat po

[@VhongRadioCommunication]

Yes sir dapat magkaiba freq. sa RX at TX kasi dadaan pa xia sa REPEATER Radio bago mareceive ng ibang naka portable..pag magka parehas ng RX at TX freq. direct contact sa portable to portable at short range contact.

[@donrye9479]

@@VhongRadioCommunication Copy po sir, pero pwede po si cp1660 sa simplex?

[@VhongRadioCommunication]

Yes sir puede po need mo lang program both RX & TX same frequency para mag simplex.

[@donrye9479]

@@VhongRadioCommunication Salamat po sir sa response, last question po may MDC1200 po ba siya yung "squack" sound sa dulo?

[@DHLVFBDragon41s]

Pano po cancel scan mode?

[@VhongRadioCommunication]

medyo nakaklito lang pag manual scan programming sir mas ok reprogram via PC software sir para mapili mo lang kung ano channel scan mo at kung saan mo assign key para sa scan...ty

[@arvindauz609]

patulong po, ano po gagawin sa motorola 1660 pag ERR-CHAN ung nsa display? salamat po

[@VhongRadioCommunication]

Need clone iba radio pag d umubra palit eeprom na po.

[@ensmendonespn3944]

para saan po ung tone?

[@VhongRadioCommunication]

Privacy po na para kahit same frequency magkaiba tone di sila magkakarinigan.

[@aceace9089]

sir meron po ba kaung tut ng pang MOTOPLUS GP-900 kng panu po i program

[@VhongRadioCommunication]

Sa ngayon sir wala tignan ko sir kung may unit ko balikan ko kayo.. Salamat

[@aceace9089]

@@VhongRadioCommunication maraming slamat sir sana makawaga po kau 😭😭

[@enrerickygozun7200]

Patulong Po. Pano Po tangalin Yung Kaylangan pa pindutin Yung program button para marinig mo Yung nag Raradyo sayo

[@VhongRadioCommunication]

Hwag mo nlang po lagyan ng RX Tone.sundin mo po programming tutorial ko.. Off nio lang po RX tone.. CSQ

[@davaocitytrafficguy3792]

Paano ilipat sa channel at naka red po

[@VhongRadioCommunication]

Pasend nga po picture
Pm nio po ko FB Pages "Radio Communication"

[@norwenvillarba3079]

Paano po alisin ang roger.nka on po kc xa

[@VhongRadioCommunication]

Off nio lang signalling.

[@arifrohman6746]

Gmna klo yg R0350

[@VhongRadioCommunication]

hope you translate it to english sir...i can't understand

[@ruelasentista1248]

SIR PAANO PO PALITAN ANG VOICE MALE TO FEMALE BAOFENG BFV8

[@VhongRadioCommunication]

Yun po bang pag nag transmit kayo dating sa kausap nio magiging female voice maririnig..yun po ba ibig nio sabihin sir.

[@shienleevlog2330]

Ginagmit yan dati sa communication woki talki

[@lioness1508]

Sir paano kung may nka display na "backlight sa screen?

[@VhongRadioCommunication]

Lagi po ba nka on yung backlight sa screen yun po ba ibig niyo sabihin.. Puede po program yan na naka "auto" lang siya.

[@lioness1508]

@@VhongRadioCommunication yes Sir.. Lumalabas nmn ung AUTO kya lng ayw po mgfunction ng left & right keypad

[@VhongRadioCommunication]

@@lioness1508pm mo ko sir sa link na to post mo picture trouble radio mo.. Ty
facebook.com/ismael.gregorio.925

[@suicide852]

Yong radio ko kase hindi po mapalitan ng alias, ano dapat gawin?

[@VhongRadioCommunication]

Meron po yan ma'am sa manual programming palit alias dko lang po nasama sa tutorial...o kaya need n po programming software/cable via computer para po mapalitan ng alias..

[@suicide852]

@@VhongRadioCommunication Kapag naka-channel po sya sa manual programming, ang lumalabas kase ay Time out at Prime Channel. Wala na yung Alias.

[@VhongRadioCommunication]

Di mo po na papasok programming mode.... Panoorin nio po ulit video tutorial kung pano ma'am yung una.