Seems to work on most Baofeng radios. I tried several different models and they seem accept almost any frequency, if programmed beyond a reasonable range they won't receive or transmit. Seems to be hardware limits depending on model. Thanks for the Tip!
I tried this on 3 different BF888s radios. one with the following CMIITs n/a 2017fp0564 2012FP1918 All three just beep when the frequency is changed to sub 400
My BF-888s show same behaviour, if I program them to Freenet (149MHz) I just hear a beep and there is not trasmission. I purchased 2 BF-888s in 2022. (The radios does not show any CMIIT, it is just not printed on the radio).
If programmed on vhf, does it really work like a Vhf radio or is the signal or battery compromised? What do you suggest? Can few channel be programmed on vhf and some on uhf in the BF 888S
From my bf-888s I can change the frequency by following your tutorial but when I tried to transmit... it doesn't work. No red light when I press the PTT. I was hoping you have a way to fix this issue.
@@DMinorUpdate I am sorry for the late reply... it worked. I missed the Channel 1 to change it on VHF that's why it didn't work on my first try. Thanks sir.
VHF is for wide-open field with no build surround, the UHF is for build block place will work better, now you decide which one of this is suitable for you
Hello. I did according to this method. Now the radios are not working. The red LED is on all the time. They also do not connect to the computer. Help!!!!
I'm trying two VHF frequencies on channel 10 15610000 and 11 11830000. They do show in the download from radio that they are programmed in. However when I try to listen to those channels I just get a continuous tone.
If we do this process will only one channel will be VHF & other channels will be UHF? can we use both frequency alternatively if we do this programming?
@@lananggaming3831 can't wait to do a range test later for the VHF (simplex mode). How I wish there is a way for me to test the power when transmitting on VHF.
I got it to work 90%. Can transmit to other radios but I cannot hear what they say unless I press the monitor button. Where did I go wrong with programming.
ng try ako mg program. kaso ndi q alm if ung cable ang sira. pag click q kasi ung clone radio. error: no response on the radio lumalabas.. check q ung usb setting. nkalagay ubs serial unavailable. bka matulungan mo aq sir
om, gimana caranya pada saat standby frekuensinya tidak berubah lagi..??? di video ada keterangan fitur scannya di non aktif kan, nah pertanyaannya, bagaimana cara menonaktifkannya?? terima kasih sebelumnya om...
millon de gracias por el aporte, me funciono! tengo dos handies baofeng 888-s y me permite modificar EN CUALQUIER canal la frecuencia. ahora...tengo una pregunta...REALMENTE funciona en VHF? como puedo constatar que este transmitiendo en VHF?
@@VinoRosso59 lo q si pude poner las frecuencias VHF en cierto rango (245 - 246 mhz) las otras que van de los 137 - 174 me hacen un pequeño ruido de fondo en los baoeng 888-s y, cuando hablo, se corta la comunicacion. te ha pasado a vos? calculo debe ser un tema del transmisor
malam kak saya mau tanyak saya punya hatte baofeng masalahnya hatte saya blm diprogram. saya inggin hatte saya jadi dua band kak kalao sampean mau bantu saya kak
@@kurowikurowi1083 kaya mura ang baofeng 888s dahil fixed frequency na siya sa lahat ng models na 888s, kumbaga parehas sila lahat ng frequency kaya lahat ng naririnig mo jan malamang naka bf888s din. pero pwede naman palitan yung frequency nang channels niya pero dapat may computer ka at usb cord na pang baofeng, download mo yung CHIRP software.
Not sure you should to make a UHF only radio with a UHN antenna transmit on VHF. I wouldn't expect your output transistors to last too long doing that, (even if it appears to work) Just buy a cheap dual band Boafeng, not like they cost much
@@VinoRosso59 well I have entered specific marine channels like Ch16 VHF (156.8 MHz) and I can listen to that channel wihtout any problem but when I try to transmit nobody can hear anything, not sure why...?
@@DMinorUpdate berhasil mas, tpi ketika diisi dg frekuensi VHF (157.970) gk mau nyambung dg HT yg punya frekuensi 157.970. tpi ktika diganti lg k frekuensi UHF bisa dipakai
Lebih mudah setting tone nya pakai software bawaan baofeng gan, atau chirp langsung di tampilan utamanya. Sehabis itu baru rubah frekuensi nya di browser chirp kalau mau diubah jadi vhf
Hello - they have make changes on Chirp and does not allow this. Do you have a old copy of the software or another idea? Many thanks...
Seems to work on most Baofeng radios. I tried several different models and they seem accept almost any frequency, if programmed beyond a reasonable range they won't receive or transmit. Seems to be hardware limits depending on model. Thanks for the Tip!
Hi thanks for your update
How do i turn my channel 16 to scanner mode?im new to this
Only works on 888S models made before 2017.
Hi thanks for the info.
Looks like a good video can you do it again and explain what you are doing 🤔
I tried this on 3 different BF888s radios. one with the following CMIITs
n/a
2017fp0564
2012FP1918
All three just beep when the frequency is changed to sub 400
My BF-888s show same behaviour, if I program them to Freenet (149MHz) I just hear a beep and there is not trasmission. I purchased 2 BF-888s in 2022. (The radios does not show any CMIIT, it is just not printed on the radio).
I tried to do this but I could not remove the numbers in tx or rx
Will it be possible to set 446 mhz PMR UHF on these radios ??
Yes it is, done them on mine
@@Marko_2807 ok.thats great..thanku
thanks man, it works on my 888s, using FTDI usb ttl cable. i can transmit on vhf, tested with rtl-sdr receiver.
Hi, david. Glad to hear that. Nice !!
If programmed on vhf, does it really work like a Vhf radio or is the signal or battery compromised? What do you suggest? Can few channel be programmed on vhf and some on uhf in the BF 888S
Recent BF888s radio can't be programmed on vhf Maybe due to factory limitation. CMIIW
you're amazing. Tried it with the new version of Chirp, I think its unsupported there but the one you put in the drive works wonders. Much Appreciated
Sent you an Email, please check thanks
Email replied.
sadly will not work on chirp next 😞
From my bf-888s I can change the frequency by following your tutorial but when I tried to transmit... it doesn't work. No red light when I press the PTT. I was hoping you have a way to fix this issue.
Try to input different frequency on other channel. Channel 1-8: vhf 9-16: uhv vice versa
@@DMinorUpdate I am sorry for the late reply... it worked. I missed the Channel 1 to change it on VHF that's why it didn't work on my first try. Thanks sir.
@@Tirufam glad to hear that. Nice..
great tutorial. but all i get is a tone after on the specific channel.
Great! How about the power when transmitting in vhf? Is it good?
Unfortunately i don't test the power when transmitting in vhf. I think it will be lower then uhf
VHF is for wide-open field with no build surround, the UHF is for build block place will work better, now you decide which one of this is suitable for you
Thanks for your comment really help
Why some baofeng 888s will not accept vhf frequency? it has a feedback sound?
Sir paano po yung pang dalawahan lang? Ayaw ko pong marinig kasi yung iba
Hello. I did according to this method. Now the radios are not working. The red LED is on all the time. They also do not connect to the computer. Help!!!!
MINE TOO
How can I find out what year my bf-888s was made
I'm trying two VHF frequencies on channel 10 15610000 and 11 11830000. They do show in the download from radio that they are programmed in. However when I try to listen to those channels I just get a continuous tone.
try to put another channel with VHF frequencies may help.
If we do this process will only one channel will be VHF & other channels will be UHF? can we use both frequency alternatively if we do this programming?
We can choose what frequency we would use. Uhf or vhf both work on every channel. CMIIW
😢 the latest version of chirp doesn't allow you to do this but the one you added in comments work but I need more training.
YEA YOU NEED THE legacy 2022 VERION
It worked on my BF 168. 73!
Glad to hear that..
@@lananggaming3831 can't wait to do a range test later for the VHF (simplex mode). How I wish there is a way for me to test the power when transmitting on VHF.
I got it to work 90%. Can transmit to other radios but I cannot hear what they say unless I press the monitor button.
Where did I go wrong with programming.
is there a reason i can’t use DTCS codes when doing VHF?
ng try ako mg program. kaso ndi q alm if ung cable ang sira. pag click q kasi ung clone radio. error: no response on the radio lumalabas.. check q ung usb setting. nkalagay ubs serial unavailable. bka matulungan mo aq sir
itong akin na baofeng bf-888s hindi ko maprogram sa vhf frequency hindi mapalitan ng frequency
Assalamualaikum saya dari Malaysia saya baru sahaja beli Boafeng ni dan belum cuba lagi untuk setup dia.
Wa alaikum salam, silakan dicoba saja. Tetapi ada beberapa yang tidak support vhf terutama keluaran tahun terbaru.
Do I need to change the antenna? Because in the antenna it is written that 400-470Mhz
If you choose to using both frequency, better change the antenna to maximize tx on vhf
I'm very thankful to you sir
hi youre welcome
Trying to clone my bf888 to another how can I do it one is a police scanner
Funziona grazie!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Its good to hear that.
Klw mau seting ht bf888s yg ada di daerah Jakarta Selatan di mana ya
Can anyone tell me where i can get the Chirp version and download link many thanks.
Things seem to have changed in CHIRP. Now I can see the raw data in Browser tab but I cannot edit it at all.
Use the legacy version of chirp. I tried it and it works but my bf888s is to new. I only get solid sound beeping. Must be chip set or firmware.
It doesn'y work, it just beeps
hi, why i cant see my my port at the firtst place ? do i need to power on the baofeng before insert usb ?
Try to switch of and power on the baofeng.when insert usb
@@DMinorUpdate after programming done, it works. but i cant hear from the opponent :-(
How about transmiting?its working?
This is awesome!👍
good job and song name? please
om, gimana caranya pada saat standby frekuensinya tidak berubah lagi..??? di video ada keterangan fitur scannya di non aktif kan, nah pertanyaannya, bagaimana cara menonaktifkannya?? terima kasih sebelumnya om...
Frekuensi yg bisa scan hanya di ch 16 kalau tidak salah. Kalau yg lain frekuensinya akan tetap sama.tidak berubah
millon de gracias por el aporte, me funciono! tengo dos handies baofeng 888-s y me permite modificar EN CUALQUIER canal la frecuencia.
ahora...tengo una pregunta...REALMENTE funciona en VHF? como puedo constatar que este transmitiendo en VHF?
hola Gonzalo, funciona realmente en vhf, testado con otra radio con display de la frequencia. Pero no puedo poner el tono para abrir los radio puentes
@@VinoRosso59 lo q si pude poner las frecuencias VHF en cierto rango (245 - 246 mhz) las otras que van de los 137 - 174 me hacen un pequeño ruido de fondo en los baoeng 888-s y, cuando hablo, se corta la comunicacion. te ha pasado a vos? calculo debe ser un tema del transmisor
@@groth901 Estoy esperando las antenas de dos bandas. Luego te dirè
@@groth901 ¿Cambiaste la antena, si? La original es para 400-480 Mhz.
@@VinoRosso59 ahhh no, no la cambie. Cambiandola se soluciona? Entonces viene x el tema d la antena
Mau tanya gan kalau freq 354 125 itu uhf apa vhf.. Terus bisa gak ht uhf dirobah ke vhf
Itu UHF gan, baofeng bf888s ada yg bisa diubah ke vhf 136-174Mhz
Berarti ht ini bisa ya gan.. Kira2 recomended gak gue beli ht ini.. Trus dirobah ke freq 350an..
@@B2007HER mending beli yang sudah dual band bang, misalnya baofeng uv5re plus
Wow amazing.. tnx bro
Sama sama bro
@@DMinorUpdate sir may mabibili pa bang channeling cable? Pls. Message me pls. Jayson bollozos (fb)
Mine beeps when going to vhf channel
Try to add vhf on other channel may help.
try use triple 8 instead of chirp!
@@technovan1133 Please post a link, if you don't mind. Thank you
Latest chirp software
chirp.danplanet.com/projects/chirp/wiki/Download
how to add - 500 to VHF frequency?
malam kak saya mau tanyak saya punya hatte baofeng masalahnya hatte saya blm diprogram. saya inggin hatte saya jadi dua band kak kalao sampean mau bantu saya kak
Sebenernya ht bf888s rekomended di pakai di uhf bang. Kalau di rubah ke vhf kurang optimal. Kalau mau vhf mending pakai baofeng uv 5re plus.
what is called in that cable wire use to computer?
Baofeng cable data, using usb to ttl instead.
Sir pano ma xtend yung yung range nang baofeng 888s namin 5km po kse distance nang post from another
bili ka mahabang antenna
V.Delgado sir paano naman po yung pang dalawahan lang? Naririnig ko po kasi yung iba. Salamat
@@kurowikurowi1083 kaya mura ang baofeng 888s dahil fixed frequency na siya sa lahat ng models na 888s, kumbaga parehas sila lahat ng frequency kaya lahat ng naririnig mo jan malamang naka bf888s din. pero pwede naman palitan yung frequency nang channels niya pero dapat may computer ka at usb cord na pang baofeng, download mo yung CHIRP software.
V.Delgado paano po gawin yung private channels?
@@kurowikurowi1083 download ka ng CHIRP tapos nood ka sa youtube
I got it to work but it no longer drives my 2 kW amplifier😮
my radio bf 888s refuse to clone why?
Have you try to edit value from browser menu on chirp?
Anung antenna ang mai recommend nyo para lumawak yung coverage ng bf888s?
Untuk antena nya gimana gan ganti yg dual band juga atau tidak, tolong pencerahan nya
Sebaiknya ganti gan kalau udah berhasil rubah ke vhf
Apa punya rekomendasi antena yg kompetible dengan merk baofeng bf 888s gan. Maaf newbie terima kasih sudah berbagi pengetahuan
Sepertinya merk nagoya banyak yg pakai gan
When I turned it on, there's only a never-ending beep sound I hear.
I get the same thing can someone please tell me what I am doing wrong 🙃
Thank you! Muchas gracias!
Youre welcome
bang di laptop sy CHIRP keterangan browser'a tidak ada tuh harus gimana bang perlu pencerahan nih.terima kasih...
Klik dulu help-enable developer mode trus klik view developer mode-show raw memory
Close chirp, dan buka lagi chirp nya
THANKYOU VERY MUCH
Youre welcome
Not sure you should to make a UHF only radio with a UHN antenna transmit on VHF. I wouldn't expect your output transistors to last too long doing that, (even if it appears to work) Just buy a cheap dual band Boafeng, not like they cost much
Mengatasi not respone itu bagaimana waktu read nya ?
coba matiin htnya dulu terus nyalain lagi
@@DMinorUpdate sudah bang tetep no respone from radio ?
@@DMinorUpdate saya pakek win 10
won't work at all.
Bang kok pas proses download error terus yaa no response from radio
Posisi ht dalam keadaan nyala gan
2018 and 2019 model bf888s canot program in vhf frequency, its beeping,...but my radio bf888s model 2017 the vhf frequency is working correctly.
Seem the newest product designed only for UHF?
@@DMinorUpdate yessssssssssssssssssssss
Ginawa ko naman pero hindi nagwork.
why does it beep?
Paano mgprogram bf 168
bisa kirim file nyaa...???
Is there a way to set sub tones to access radio bridges? IW6NDO
I respond myself. Done. You can put the value in TXTone in memories' browser....
Cool. Hope other people see this usefull information
@@VinoRosso59 can you explain the process? I can listen to Marine channel I encoded but I cannot call or transmit to them...
Hi @@bastienfrancois9180 what do you need in particular?
@@VinoRosso59 well I have entered specific marine channels like Ch16 VHF (156.8 MHz) and I can listen to that channel wihtout any problem but when I try to transmit nobody can hear anything, not sure why...?
Friend it is 143.600 on uhf not on vhf
hi thanks for correction
Mas punya sya bpm brhasil, mohon bantuannya
Kendalanya gmana mas? Berhasil input frekuensi nya atau ga?
@@DMinorUpdate berhasil mas, tpi ketika diisi dg frekuensi VHF (157.970) gk mau nyambung dg HT yg punya frekuensi 157.970. tpi ktika diganti lg k frekuensi UHF bisa dipakai
@@DMinorUpdate ada bunyi beep panjang jg ktika diinput frek VHF
100% does not work. TX only.
♥
wah
Kalau gak muncul menu browser, klik help, trus klik enable developer functions.
Close chirp dan buka chirpnya lagi
bang cara setting tone gimana
Lebih mudah setting tone nya pakai software bawaan baofeng gan, atau chirp langsung di tampilan utamanya. Sehabis itu baru rubah frekuensi nya di browser chirp kalau mau diubah jadi vhf
DOES NOT WORK FOR MURS
WHAT ARE THE SPECS FOR MURS rxtone / Dec /Hex ?
is there a MURS spec sheet with ALL the other settings?
komentar ane di hapus
Komentar apa ya? Mungkin mengandung link atau restricted word, maka otomatis di mark sbg spam
100% false false false.