WHATS UP WITH THAT ORANGE NOVA??? Here’s the ANSWER! Plus, we draw the WINNER OF THE 427!!!
HTML-код
- Опубликовано: 22 ноя 2023
- A lot of you have been asking, “Who’s Orange Nova?”
Well, it’s not ours. At least not yet. Who knows… But we are doing some MAJOR UPGRADES ON IT!
Plus, we draw the winner for the 427 Small Block! 
Авто/Мото
Is it just me or the video is at 144 ?
It takes a while to get full quality especially when millions of people are online scrolling on a holiday. It took forever to upload
It's up to 480HDR now. Want to watch... but OMG/SRC is worth the better res. So I'll try again later.
It would be a worthy bet that uncle Bob is either building or has ordered the goods for another ripper 427 motor. It would be fun to see if that combination can be repeatable again.
Cool 😎 . Would love for the winner to bring the truck to the OMG / SRC headquarters for a build vlog !
If uncle bucko extractor they are supposed to be spun create some heat then wack them with a hammer then they bite but I am not there so I can’t be 100% sure. Glad you got them.
I am very impressed with those kids from House of pearls. They take pride in their work and they are committed. I can't wait to see how the 55 turns out! It's gonna look GREAT!!
I agree. They seem to be a rare breed. Very refreshing to see!
*Thats one of those shops you walk in and instantly know that you can trust them with your project.* 🤘
Love seeing a restoration shop run by young guys (and a gal)! Our hobby has to have an infusion of young talent to survive.
I tell ya, never met them but im proud of what the house of pearls kids have accomplished . so great to see youngsters having real passion for classics and do so well . a whole shop full of work, thats impressive . gives me hope for the future seeing there is a next generation that'll carry the torch and keep these old cars alive
Paige cracks me up.
It’s so awesome that guy is gonna be able to get his C10 back on the road and enjoy it once again. I’m so happy to see it went to someone that can use it in that way.
Perfect guy to win it, hope we can see it with the 427 installed!
Congrats Tim on winning the engine. Hope everyone had a good thanksgiving.
Great find in young talented people. I too enjoy helping folks show off what they do well & help move careers along.
Glad to see the 427 going to an old Chevy that needs new power. Awesome giveaway OMG and SRC
“I mean….. I wouldn’t steal them” 🤣 Yeah those wheels were hideous on that beautiful Nova.
As a 34 year old bodyshop owner its cool to see some younger people doing bodywork!
Didn't bother me about the resolution. That gentleman won an incredible motor. Go ole mans garage!!!!!! Your give aways are top notch. Thanks for the video.
lol trying to get the honey on the biscuit 😂bill says great video thanks for sharing hope everyone has a great thanksgiving god bless
Thanks Bill for sharing a day in your life with us. You have a really amazing family and the best friends anyone can ask for
I love 💕 seeing cameos from Thing #1 and Thing #2. Young men figuring out their path in life. Oh so young and inexperienced about life. They are SOOOO funny working together with their Boss Mark. A Larry, Moe, and Curly comedy moment for sure! Anyway, thanks for the video 📸.
“Fortunately, I keep my feathers numbered for just such an occasion” 🤣😂🤣😂
Man that Nova looks much better with those RC Comps. Congrats to Tim on winning the 427.
You ain't a kiddin'! Foose wheels on muscle doesn't work.
@@NonTypicalRacing my cousin just finished his 64 SS Impala. He wants those Foose wheels on it. I just shook my head and told him Lil cuz please don't do that to that beautiful ride. I showed him some old school Cragar Supremes and how good it would look and he changed his mind.
@RedEyedPatriot right on! Sounds like you saved another classic from runnin' "skinny jeans".
Was so bored I put on a movie to relax. Then this came up on my feed. Before I watch this, thanks for all the great entertainment. Hope everything goes well with anything y’all have in the works.
Your friends from New York.
Thanks for new video been waiting 😁 congratulations to the winner of the 427
Congrats tim. Enjoy it. SRC & OMG out here helping people help themselves.
May blessings continue to come for you and the family bill.
Foghorn quote floored me Bill. He's just like you
Happy Thanksgiving Bill, Thanks for the late night upload!!
Tim is very luck !!That engine sounds so good.Keep up the great videos.
Man I was hoping to win that 427 but it does sound like it’s going to a great home and he needs it more than most since he said the 406 has blown head gasket. Hope he enjoys the new power plant. I figure though after the install that power plant will find other weak points on the truck. Lol
I enjoyed this video Bill, I really like the wheelie footage in it with your Nova .Your Nova is one sharp looking automobile !!
The House of Pearls young people are fantastic.
Crazy talented.
Fantastic attitudes.
Bill i feel your pain with the lock lugs 😂 i used to work at a auction & would have to take these off without the key almost daily. Slightly smaller socket works best but it will crack.
Man that nova looks so damn nice. Cannot wait to see the 55 all redone it’s gonna be the best looking car in the fleet! Thanks for the video Bill! Happy thanksgiving!!!
Congratulations Tim, I really wanted that 427 for my s-10, but that beautiful 76 c10 will be a great home for it!
“It was an attempt to collect sexual favors “ 😂😂😂
Best line ever
Congrats to the Winner 🏆
He is going to be busy with this 427 SB
Thanx for Sharing your Great Day 👍
Happy Thanksgiving
Have a Great Day 👍
BILL n Mrs.Vicky and Family
God Bless You 🙌🙏
Bill trying to trade sex for work was hilarious, thanks for the entertainment and the update hope you all had a great Thanksgiving. God bless and as always be safe.
Mrs. Vicky was beet red! 🤣
Man I love waking up to the old man and family. Happy holidays from Hurst Hotrods and Customs!!
Yoooo, I got to assemble that 69 GTO chassis!! How cool ❤
Love your channel, 71 year old new subscriber! You called it on those Foose wheels YUK!! They should be on an impala in Detroit lol!!
Congratulations Tim on winning the 427. U better be ready to Roll buddy.
🎉🎉🎉BILL IN THE BEGINNING YOU SAID THAT YOU WOULD DO GOOD THINGS WITH THIS CHANNEL 🎉🎉. YOU ARE MAKING A DIFFERENCE BROTHER. THUMBS UP AND GOD BLESS ALL 🎉🎉
It is SOOOO cool 😎 that The Old Man Garage and SRC teamed up and fixed up a fan/clients hot rod. It's actually cool for business and great content for the fans. Thanks for the video 📸.
That's a badass truck Tim Weaver has and we know it's going to get on down the pike baby much love to you Vicky and the family brother Bill💪🏻💪🏻💚👍🏼👍🏼👍🏼👍🏼👍🏼🇺🇲✌🏼
Very cool the 427 is going into a truck that’s been built for it all along! As much as I wanted it for our Nova, Tim will get some good use out of it. Happy Thanksgiving OMG!
That Nova looks so much better with the new wheels. Congratulations to Tim Weaver. That 427 is bad ass, should power his `76 C10 truck nicely until that rear end goes boom. Hope you had a nice Thanksgiving, even though it was at your favorite person Paige`s house😁. Mark is a lifesaver, great guy. Can`t wait to see the new shop all set up. Tell thing 1 to dump that Kia before the engine blows up. Kia`s and Hyundai`s(same company) have engine issues. There is a class action lawsuit against them because their junk blows up even with proper maintenance. Stay safe all, God bless.
MY FAVORITE GARAGE CHANNEL!
😁👍🏼
Happy Thanksgiving 🦃 , love waking up to watch a OMG Video !
Allison seems like the sweetest most helpful young lady.
Thanks for the Thanksgiving treat. Really enjoyed the video. Hope your Thanksgiving was nice as ours. Love y’all
Bill! I hope your attempts at receiving those favors paid off brother!! Lol
I would have totally donated that 427 back to the old Nova. That car was Happy with that setup!
Tim’s one lucky guy. That going to be the cherry on top for that 76 chevy.
🤞🏻 will I got my fingers crossed hoping I'll win the SRC S10 💯
Man you guys are awesome! Thank you for all you do giving that engine away is such a huge deal!!
Damn. Your own employee is the first on here 🤣
whats up steve
Just on vacation in Florida. I’ll be back Monday!
Foghorn leghorn 😂😂 my dad's favorite
Thanks Bill for video sir! God bless u and ur family
Just a FYI. I work at a Goodyear store that sells custom rims and im their ASE Master technician. A "cheap" 12 point 18MM deepwell is almost always my go to for removing splined locking lug nuts. You basically use ot tje exact same way you tried using the removal tool you had then drive the lug out in a vice with a air hammer/chisel. The difference is the socket grabs the splines better instead of spinning plus it is a lot thinner and is a lot less likely to scratch the rim.
Happy Thanksgiving Old Man and the Fam!!
Thanks Bill I needed this one too finish off my holiday night shift. Much appreciated big guy!
Lol welcome to the wheel and tire game boyos! Nothing takes a day sideways like a set of locking lugnuts without the lug key!
Good looking truck Tim has, that 427 small block should make it hop pepsi bottles, once he changes that Tru Trac
Tuner nuts is what the import car community call them. Most aftermarket rims on an import use those wheel nuts.
It’s not too hard when you’re cutting out old and welding in new just takes time.
I wouldn't have those wheels either no better way to spend a Friday afternoon love this channel
Sometimes you can play with some metric sockets and they’ll fit good enough to get em off. 19-21mm usually. I dealt with this working at the dealership and at our shop more than I wish I did lol
Thank you for sharing.👍
Thanks for sharing Bill Hoskinson
god bless the ups guy ! poor mark !!
I'm looking forward to seeing the 55 become even better looking...
Congrats Tim on winning the 427. Can't wait to see it around here at some of shows and events. I am in Hedgesville and Berkely Springs is next door to us.
Congratulations to Tim on winning the engine! I'm from Martinsburg WV, just up the road from Berkeley Springs. Love the channel. Keep up the great work.
Billy's right we're not getting anything done today
Yeah I wouldn't steal those wheels either
LOL
Hey Bill, it is your dad's car so get it done and get it back to him. I'm sure he would love to have his car back. Lol
Yep 👍👍
absolutely can't wait to see that video Bill! love that guy already!
Most big part stores sell the socket to remove them. Most of the cheap locks are all the same
Hoping you and the family had an amazing Thanksgiving. I’m thankful for your videos. They bring us all so much happiness. 👍🏼👍🏼👍🏼👍🏼
Very happy to see that 4 two 7 give a way going to a great home, truck looks proper. Bill's ears popped at the application. Hats off to OMG and SRC for bring joy to this world 🌎. Happy Thanksgiving to everyone south of Canada 🇨🇦
Uncle Bucko and The deuce are one of the same lol😂
I bet that orange nova is a absolute blast to drive with the 572 and 4speed
You’re right about that! I’d love to drive it. We’ve got a 5 spd 396, but it ain’t a 572 lol.
Mr Bill, I hope y’all had a great holiday. Pet June and Chevy for me … (since I like my fingers) 😜
I love how thing 1 and thing 2 have fully accepted their names and call themselves as such now. 😂😂
👍🏽🇺🇸👍🏽 that’ll make his truck run great. Congratulations Tim
Happy Thanksgiving
G'day from Australia Bill, ya make me laugh, love your show, (Fog Horn Leg Horn 👍😅) and your description of those wheels , gold!! I just call it the Roller Skate effect, JUNK .. Now it looks awesome with the RC's.
You can use a regular socket on them. Just use a hand wrench to take them off. That’s what I’ve used when I get them in.
That’s a discount tire splined lug nut for future reference. You can purchase just the socket from any one of their stores.
Wow Awesome Video love your Channel and your Family 😊 Keep up the Amazing Work you Guy's Rock !!!!
Keep the great work bill hope you have great Thanksgiving
Very interesting 🤔👍. As always I really enjoy your content 😜. Thanks 👍 for sharing.
When you use those f u bolt remover sockets take them off by hand not a impact it’ll work a lot better
I was up for this one 😊
Hey Mr bill I had the same thing happen with the lug nuts I used a 6 point 17mm socket
Arizona Specialty Motors , 65 Chevy Malibu SS , for sale. I saw a UTube video about it.
If I were balancing those tires, I would pull the sticker off. Lol. Maybe that’s why I’m not mounting them
That’s a sweet truck for that engine
Happy Thanksgiving Bill and family!
thank you
From the looks of the car's at that paint shop the 55 going to be in paint shop storage for awhile!
That's awesome
Could you imagine if your brother and Vickie’s sister were a couple , OMG that would be one grumpy ass household …
What a good way to start my birthday with an OMG video!
lol your wife sis and your brother is the perfect match lol.
See why I have a handful of spline sockets from Holley clearance sale. They were 36 cents I think. I might never even use one, but what if?? Plus they cut pretty easily and you have 1/2" drive what ever to weld to your tools.