CRANE TRUCK LEFT BEHIND 13 years ago! Can we start it?
HTML-код
- Опубликовано: 18 ноя 2024
- NO START on CRANE TRUCK THAT SAT 15 YEARS LEAVES US BAFFLED!
▶️ 4 PIECES IN MISSISSIPPI: • ELDERLY WIDOW NEEDS TO...
💁🏻♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
🎁 AMAZON STOREFRONT*: www.amazon.com...
👕TRUEWERK CLOTHING: truewerk.com/HANK15
You'll automatically save 15% by using this link!
🇺🇸HOMESTEAD IMPLEMENTS: bit.ly/2MsYVCC
🎧 Elgin USA: elginusa.com/ Save 10% with HF10
🥾Georgia Boots: www.georgiaboo...
👨🏻🌾 👩🏼🌾 Our website!
www.hamiltonvi...
🔦OLIGHT: www.olightstor...
SAVE 10% with code: HF10
MAIL: P.O. Box 183, Vernon FL 32462
FOR BUSINESS INQUIRIES EMAIL ME:
Hank@ad-society.com
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission.
Let me give you an easy tip for when you dont have keys. Use a jumper wire and jump + to the fuse box on any circuit that will power up when you turn the key on so when you use a jumper on that fuse it will backfeed the whole ign system and its like turning the key on. Hope that helps for the future.
You guys are great i watch you allthe time.
😅
The Dynamic Duo can't start them all but I enjoy watching them try. Enjoyed the video Hank and Wiley.
I'm glad they have Hanks daughter doing the intro , gives us something good to look at even if it is for a brief time per video.
@@dondiego2262 Maybe she should help Wiley and Hank. First timers luck? Can't hurt.
Awesome, just sat down and turned on RUclips and your notification popped up , exactly what I needed to relax watching, thanks for the great videos guys
Thank you for watching
Good morning from Greece,guys!!! I wish to have a nice weekend!!! So happy to see you!!! Great and good job!!!
You know you ask for comments but don't look at them when you are working on a vehicle they were telling you that wasn't the way of hooking it up I really enjoy watching you and Wiley
Wally is a great guy to have around he's always full of a chuckle keep up the good shows I love them I watch him and yeah I have found them like that myself had to cut trees out of them great show
Hassellhof Wiley was a scary sight. LOL Bravo to your Editor
I do enjoy watching you and wiley working on these stubborn vehicled
You had the starter button on wrong go to battery side to starter of the solenoid
I have faith in the Dynamic Duo, they will make it run!
You had the starter switch hook up wrong, you had one lead hooked to power and the other hooked to ground, you should have hooked one lead to the large terminal(12v) and the other to the small terminal (starter signal terminal)
Yea ! he had 12 Volts going to ground through the Switch.
Yea I seen that why hank
Keep crane truck alive!!!
Hey guys from Ontario Canada whos on camera awesome job
Hola, saludos y bendiciones para usted y su familia, me encanta ver sus videos, son muy constructivos. Ojalá mi Padre Dios Jehová permita algún día trabajar con usted. Actualmente resido en Venezuela.
You need to look on steering column under dash and you will find the ign. Switch plug
Ur grounding the starter out touch the big post and the little post in the front to crank it over
That "Hank Hasselhoff" pic almost made me spit out my coffee. 😂
😂😂😂😂😂😂😂😂😂
Morning, Good to see you Fella’s
It almost started. It moved at least....about a half turn...lol. 😄 I bet the key was probably in that glovebox that wouldn't open. Thanks for your efforts guys! God bless! 🙂
Hey there fellas, it was hard to watch this one. I'm thinking the truck would have cranked up if your starter button wasnt hooked straight to ground instead of the smaller terminal on the solenoid. Plz try it again! I think she'll go. Much love guys. Love the videos.
Good ol Smokey and the Bandit references, love it!
Drove a Ford tandem like that and a GMC the same. 3208 non-turbo, probaby 210 horses and both 13-under dumps. Good trucks and good driving. We were hauling dirt off a state DOT job and the big boss loaded the Ford I was herding. It was usually used for hauling sludge/flax fiber off from the paper mill so he loaded the wagon. I was in sight of the dumping spot when a Highway Patrol pulled me over and weighed the truck. Sure glad the BOSS loaded it because that one load of dirt cost 12 or $1500.00 dfollars. I dumped it out by itself because it was so special. Sorry that didn't light but all those complicated questions will sure have Wiley turning over. God Bless Yall!
Sorry to see the wires getting hot but you are dead shorting your starter button. it needs to hook to the terminal on the solenoid.
Thanks
After wrenching for years I've found that whenever I'm looking for a tool it's always in the last place I look. Love the channel.👍
Lol true
I like hearing a little about the video from hanks daughter and then IMMEDIATELY afterwards hearing all about the video from Hank and Wiley like we always did. Definitely an improvement and real time saver. 😂😂😂
A good lock smith could make a key.
Good video. You need an old crane truck.
Yes I do
OLD GUYS RULE that's a tough one you did good getting that far next video looks good God bless
love that ya guys make me laugh so much besides learnin, really been helpin alot with everythin iv been goin though, thank you guys for the laughs
Your truly blessed, last time I enjoyed a day at work was 12/76..
Hank/Wiley that dipstick is dryer than my ex wife's meatloaf ,even the dog ran and hid away when she made 🤣then the next day the shoemaker called to buy it from her for patching leather goods, good video 👍
Good job and God bless yall
Although it didn't start I still had fun watching.
Good to see you lads hard at it and talking the songs I remember as a teen back in the 70's and all. Very cool. 🙂
Good Ole' Smokey and the Bandit. LOL
Smokey and the Bandit was the reference. Great video y'all!
OMG
Hank there’s funny and then there’s OH man Hank how am I going to get that picture of Wileyhauff out of my head
Laurel and Hardy at work once again!! 😁 All joking aside love the channel.
Definitely can't win them all! But I got a feeling if y'all took another shot at it, y'all would get it!
Take A hammer.& Flathead 🪛 screwdriver hit the part we're the key goes into the tumbler part of knock that part off. To be able to pull out the tumbler inside out.,or at least be able to turn it with the we flathead screwdriver.
You are going straight to ground with the starter button! you got to go from hot to the little stud on the solenoid. or get a big battery cable go big stud to big stud on the solenoid hook one end up hold the other side to the other.
Willy as Hoff that was a good one !
I hope they get this truck runnin, their luck has to change.
Those boys have that tough, I believe they will get that bad boy running. Oh no wrong.
I think Hank wired the starter switch between battery +ve and ground, instead of +ve to solenoid coil. ( at time 51'48.)
if its like an Aussie Ford of similar era and looking column ignition , you could've used the dipstick to key it over ;-)
Y'all are hilarious! I think it's stand up comedy with a little diesel fuel an sparks flying. God bless
Me gusta mucho este programa de reparaciones de maquinaria que tienen años abandonada sin prender y estos señores la hechan a andar
I think the key attached to the shifter goes to the glovebox and that is where the key ignition key is.
Ah, good call. I’ll check when we go back
Ya and if it's automatic you usually need key to shift to drive if it column start.
Zackly. What I figured. Good luck
I didn't know Wylie was on Baywatch. 🤣😅🤣😅🤣😅🤣😅
Correct size spanner does work better than a shifter / crescent wrench hey Hank 😊 , enjoy watching your videos Hank Wiley keep up the great work fellas 👍😊
Even though you are putting power to the shutdown solenoid the rack may be still stuck. You can remove the shutdown cylinder and make sure the fingers in there are moving freely up and down. The coil energizes and pulls the plunger up when you want to start and then the spring pushes it down when it shuts down.
Good morning Fellows, great to see you on another will it crank. Tuff break though, the next one will crank, I guarantee it. lol. Be good and God bless. 👍
The advice I got from an old time diesel mechanic regarding oil level was to "Put in a case and check it." In those days, it would be 6 gallons. Probably less now, but the same idea. And you always added oil in gallons. Full to add oil marks on the dipstick is one gallon.
Nice try guys really appreciate your time and effort Thanks Hank and Wiley
"He always has gas" Actually laughed out loud. Wiley does not miss a beat 😂
First Wiley in Baywatch, then A Smokey and the Bandit reference? What's Next? A Convoy?
Lol
You guys are like father and son not friends I enjoy watching you guys you are funny as hell stay together you both make the show hope to come down and meet you both in the spring Perri poland said that
To bad an you know you can’t win em all.
That photoshop of Wiley was hilarious.
I hung a lot of steel with a 10 ton R. O. Crane like that in Louisiana. It was mounted on a Ford chassis like that one with a Cat diesel engine. Good little rigs I guarantee.
I have faith that it will start
Come to England...
There's a restaurant in Devon that'll sell you a "plow persons lunch"
🇬🇧☹️
Hey every body hope y'all are having a great week end hope yall have good luck with the trucks an stufg
Good luck buddy
Sounds like Matt from Diesel Creek. When he got his crane truck wishing it was a diesel turn out be a Ford gas engine. He had to rebuild the engine.
Smokey and the bandit for the CB channels
3 weeks 8 days??? Would that be 4 weeks 1 day?
Just pull the 2 nuts off the steering column underneath the dash and take a screwdriver and just manually operate it. Your set to go. 30 seconds.
Nice way to hotwire any Ford pickup that doesn't have a locking steering wheel
@@darthhauler9947 doesn't take much to break the steering lock lol
you need to call mr creek, sure he got one of them motors
keep up the good work chaps
Maybe you could get a external pump fasten wires to it and hose one to the pump other end in the drum for a fuel source? alligator clips on the end of your wires would make good jump leads also for testing injection, and sensors, great video, all the best to yous and your loved ones
Wiley is so funny guy
Love watching you guys. God bless.
Great video Hank & Wiley, your cameraman was makin me dizzy😵
Your a bad man hank to tease wiley like that 🙃🤣
Ole smoky and the bandit on the cb channel
Watching your videos. I have learned every way there is to connect batteries. 😂😂
If it's A automatic shifter then you'll half to put it back in with the key switched forward.& In neutral position to reset the tumbler.& Locking linkages inside of the steering column.
Wouldn’t it be 14 years,6 months 9 days and 3 hours since 24 hours makes another day? 😜
Hank and Whilley that was great you guys are so funny enjoyed it thank you for sharing and your time was really great never miss a video can't wait for next one
3208 is a solid engine, no powerhouse but pretty good overall. Oliver used them in tractors and new holland ran them in their TR series of combines back in the day…
Yeah old ford motors
Had them in TR70s and tr96s I believe
You can take the key tumbler out and go to a parts store and buy another one!!
I see said the blind man as he picked up the hammer and saw! 🙂
watching from canada
A little Smokey and the Bandit reference there.
It is really easy to get ignition power although you do not have a key. On the starter solenoid there are two small cables. One of them is the starter impuls. The other is hot when ignition is on. Just give that one power and you have ignition power jumped.
You guys are hilarious and great to watch
Hank and Wiley best console yourselves with lunch. Gave it a good try better luck 🤞 next time.
You need to invest in a $3 test Light
I got one in the truck I forgot about.
I believe that starter solenoid is for the crane there should be a place on the crane to start the truck but great video thanks Hank and Wylie
12.3V and 12.4V are flat batteries. should be at least 12.6V or (12.8V SLA) battery. Need to jump across the outer and larger two terminals of that round relay with a heavy jumper cable, that should get power to the starter solenoid. The way you had it connected was a direct short from +12V to ground, hence the sparks when you pushed the button and the cable getting hot.
You can take off the steering wheel.& Then remover the twisted flange screw bolt down inside the lock tumbler part.,screws one instead. That tumbler will just twist.& Pull out after that bolt.,or screws has been removed.just remember if you replace it to put it back in the exact position it's in now is all.
God Bless and luv Mom
The only crime I saw two old guys loitering (smile)
Lol
I enjoy watching but sometimes its very painfull
I like watching y'all come to west virginia there equipment saying everywhere
Boa noite muito ótimo esse serviço caminhão branco bonito meu amigo
21:45 Smoky and the Bandit, near the beginning. Snowman and Bandit were talking about how to beat the smokies and still use their CB's. That was Snowman's idea, what he was saying. Bandit's idea was just to start in the basement, keep to the odd channels and switch every hour as Snowman's way was too confusing.
That frame looks brand new. Up north where I'm at that truck would've been rotted to the core.
Classic smokey and bandit
I usually fill the filters up with diesel and never have any troubles starting engines, starting those old locks you hammer a screwdriver in or knock the lock off with a hammer
If you reach under the dash and on top of the steering column the real ingnition switch is there.
Tow small bolts 7mm
Then you can use a small philips to slide the switch..